HT4623 Update software ios 3.2 iPad

Can I update the operating system on my first generation ipad

The Settings > General > Software Update option only appears when you have iOS 5+ installed, as you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases if you are on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
Your iPad should be updated to iOS 6.0.1 (which is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change.

Similar Messages

  • HT4623 update software ios 6 cannot work and my iphone 3 gs have not menu "software update

    I couldn't connecting to update software on i tunes or on Iphone. (my iphone 3 GS have not menu "software update"

    You won't have the option to update wirelessly unless you are running iOS 5 or higher.  If you aren't, your only option is to update using iTunes (see "Updating your device using iTunes" here: http://support.apple.com/kb/HT4623).

  • My ipad will not allow me to update software ios 5.1.1?

    my ipad will not allow me to updated software ios 5.1.1

    You do not say Why or what happens when you try...
    See Here  >  Updating to iOS 5
    http://support.apple.com/kb/HT4972

  • HT4623 How do I update my iOS on my iPad that has 5.1 ?  When I go to settings and update, it says everything is up to date as 5.1 iOS. :-(

    I need to update the iOS on my iPad.  There is no option under the settings, general section.

    A first generation iPad can't be updated past 5.1.1. Any device running an iOS version prior to 5.0 must be updated from iTunes on a computer, and if possible, the one it normally syncs with.
    (95271)

  • My laptop has crashed and I'm in between getting a new one but need to update my iOS on my iPad, is there anyway of doing this without a laptop or computer?

    My laptop has crashed and I'm in between getting a new one but need to update my iOS on my iPad, is there anyway of doing this without a laptop or computer?

    If you can't update via wifi, you can use a friend's computer, or an Apple store will do it for you.
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 4: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom
    PS When you get your new computer.
    Sync Your iOS Device with a New Computer Without Losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    https://discussions.apple.com/docs/DOC-3141
    Message was edited by: Texas Mac Man

  • Unable to update my  iOS on my iPad and iPhone.

    I am unable to update my iOS on my iPad and iPhone. Though I have had these devices and have been updating for over a year, the issue just started with this new release (iOS 5.1).
    When I connect my Pad and Phone to iTunes (Windows PC with Vista), I am told that an update is available. When I update, iTunes tries to connect to a server. Then I receive the message, "There was a problem downloading the software for the iPad. The network connection could nopt be established."
    When I try to update the devices iOS using WiFi directly (not connected to iTunes). The devices say, "Checking for Update..." and does not connect. It says, "Unable to check for update...An error occurred while checking for a software update...Cancel or Try Again"

    I solved this by downlading the iOS update via wi-fi at another location other than my home. I would still like to know why this download did not work at my home as it has for over a year. I have made no changes in my firewall or security settings.

  • Since updating to iOS 8 my iPad 4th Generation wont synch any media like music or movies, just artworks of the music I already have

    Since I updated to iOS 8 my iPad 4th generation my iPad wont synch any media like music, movies or TV shows. It always starts to synch like any normal iPad but just when its stars to transfer the movies, music or what ever new media I want to get on the iPad, it instantly restarts the synch, and the only thing it does is synch the artworks for the music and movies, but I does not transfer any media. I have restored my iPad 4 times, nothing different, I have reinstated iTunes on my PC 3 times, nothing changed and I dont know what to do.

    Since I updated to iOS 8 my iPad 4th generation my iPad wont synch any media like music, movies or TV shows. It always starts to synch like any normal iPad but just when its stars to transfer the movies, music or what ever new media I want to get on the iPad, it instantly restarts the synch, and the only thing it does is synch the artworks for the music and movies, but I does not transfer any media. I have restored my iPad 4 times, nothing different, I have reinstated iTunes on my PC 3 times, nothing changed and I dont know what to do.

  • I recently updated the iOS on my ipad 3 and lost all my files in the process. How do I recover my lost files which were not previously backed up?

    I recently updated the iOS on my ipad 3 and lost all my files in the process. How do I recover my lost files which were not previously backed up?

    If you don't have them backed up somewhere, then there's little possibility of recovering them. There are some utilities that can in some cases recover an inadvertently-deleted photo, but I've found none that can recover photos or other data from an iPad that was erased as part of an iOS upgrade. You can do a web search for something like "iPhone photo recovery" and you'll find some utilities you can try.
    Regards.

  • After updating to iOS 8 the iPad Air is getting crashed frequently including safari

    After updating to iOS 8 the iPad Air is getting crashed frequently including safari.

    Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and see if that helps.
    You may need to restore your iPad. That's where you back it up, then restore it to factory defaults, then put your backup back on so you don't lose any data. Sometimes a fresh start clears out any glitches and can help.

  • HT201444 Getting error message 4005 so re-installed latest version of itunes, restarted computer, everythingis up to date. Still getting erro 4005. This happened when I went to update software. Face of ipad showing a cable not connecting to itunes

    How can i restore my ipad to factory settings?
    Getting error message 4005 so re-installed latest version of itunes, restarted computer, everythingis up to date. Still getting error 4005. This happened when I went to update software. Face of ipad showing a cable not connecting to itunes

    Usually a USB error. Read here:
    http://support.apple.com/kb/ts3694#4016
    To restore ipad: Settings > General >(Scroll down) >Reset > Erase All Content & Settings
    Cheers,
              Alec

  • I want to updating my IOS on my iPad..What Version of IOS are the best on my iPad?

    i want it to update my IOS on my iPad..what is the best Version of IOS for my iPad?

    The only version that you can update to is the current version i.e. 8.3 - unless your iPad is the first gen in which case it only supports up to iOS 5.1.1
    Is there anything in iOS 8.3 that you need, or any apps that require a higher iOS version than you currently have on your iPad that you'd like to install ?

  • After update to iOS 5 my iPad-1 can't add new events to Calendar and Contacts

    After update to iOS 5 my iPad-1 (and iPhone 4) lost "+" symbol to add new events to Contacts /stock iOS-5 Contacts app/, and can't edit old contacts -  i can't change user photo, can't add phone number, ect.and thereis no opportunity to add new contact.
    Long Tap is not working correctly.
    And - some problems with iPad-1 stock iOS-5 Calendar - lost "+" symbol and there is no oppotunity  to add new events to Calendar.
    Long Tap is not working correctly.
    This is very important for me because I am a school teacher and can't stay without those functions
    All iPad-1 users,please check these bugs after update of IOS 5. And inform in this topic if you see these bugs or not.
    Desperately need your help

    I can't see Calendars list (iPad-1)
    ...invitations/download button on the lower right.
    where this buton?
             Lower right.  The downward arrow pointing into the horizontal brackt that looks like
              this on its side:  ]

  • HT201210 my ipad is almost 1 yr old and i was updating the ios and my ipad has a usb and itunes and that is all on my screen

    my ipad is almost one year old. I was attempting to update the ios and my ipad screed is black with the usb and itunes only. what do i do?

    Do as the image on the screen suggests.
    Connect the device to a computer running iTunes and restore.

  • How do I update the iOS in my iPad?

    How do I update the iOS in my iPad?

    The best way is to connect it to the computer you normally use to sync it.
    Never synced it? You should. This is the only way to ensure it is properly backed up before upgrading iOS.
    iOS: How to back up:
    http://support.apple.com/kb/HT1766
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623

  • Every since i updated to ios 5 my ipad keeps crashing

    Since I updated to ios 5 my ipad keeps crashing. All you see is the Apple logo on the screen and thats as far as it goes. The only way to fix it is to restore it. Any suggestions?

    Since iOS 5 has been available since September, I wonder why this is starting now ...
    Anyway, which iPad version do you have ... the original one?  How did you load iOS 5 -- through iTunes?  On which operating system - windows or Mac?
    Do you have an iPad backup?  Then yes, you should restore and reinstate the backup for starters.

Maybe you are looking for

  • QS41 and QS51- code group error

    Hi, I am trying to create new code groups in QM. i have maintained the defect classes and the catalog types. then in QS41 I have maintained the code groups for the catalogs along with the codes. All the code groups are in released status. In the next

  • SCCM Client entry in SCCM console for new VM with same hostname

    HI, I have Hyper V server with several VM's running with server OS. Recently I have stopped 2 VM's with OS windows server 2008 & 2012 & recreated new VM's with same hostnames & IP addresses. Problem is I am unable to install SCCM client on New VM as

  • Plan.xml

    I am getting plan.xml not found in c:\oracle\middleware\oracle_soa1\soa\dbplan\ I have checked the directory and plan.xml is there. also, not able to store xADataSourceName. Tried so many times and getting the same error I'm using the weblogic 11.1.1

  • BP Update Problem

    Hi, I try to update the business partner through SDK. After execution of Businesspartner.update button it gave me the error that -5002 - Invalid control account type. But same business partner i was able to update through Front end. Please let me kno

  • Questions on AQQueue.enqueue()

    Anyone know what this function returns? It's a byte array, but what is the significance? The javadoc for this method just says "enqueue a message", which is no help. My question comes about because we are trying to debug a problem where it seems like