HT4623 Upgrade question about camera

I updated our 2 iPhone 4's and our iPad2 but in the camera we do not have the new panorama function. Do I need to do something differently?

Hi, nola1950. 
Thank you for visiting Apple Support Communities. 
The panoramic photo function is only available on iPhone 4S and newer. 
Take photos and videos
Cheers,
Jason H. 

Similar Messages

  • FCP X, a question about camera settings

    I live in the middle of the Pacific and need some advice as there is no one here to help me answer these kinds of questions...
    My first 3 big projects were done in SD using a SONY PD 170 and FCE4.
    I just bought the Panasonic HPX 170 with a 64 GB P2 card.  I use a new iMac i7 (OSX 10.7.2) with all the bells and whistles and have now gone to the new FCP X for software.  I know the following is more of a camera question more than a software question, but I thought someone in this forum might be able to help me.
    We are about to shoot another full length feature film (roughly 90 minutes).  I have read through the manual and a book about the camera but I'm just not getting enough information to make the ultimate decision as to what camera settings I should use to shoot the film.
    In the end I expect the film to show at a theater here on the islands for a few weeks, and then a few film festivals and then ultimately, hopefully, sell DVDs to people who do not have sophisticated plasma TV/DVD setups, so I have to consider this also when shooting the film. 
    So.... I would really, really, really appreciate some opinions as to how I should go about this, i.e., 24p?  30p? 720? 1080i?    If it were you, what settings on the camera would you use to shoot this film???
    Thanks so much in advance.

    1080i/60 is your best choice.
    (This is assuming there's not a great deal of fast action, or slow motion in the movie. If there is, you may want to consider 720p 60).
    You really need to research frame rates and the difference between interlaced and progressive footage before you commit yourself. To be honest, the difference between 720 and 1080 is so tiny, I doubt many people could tell it apart if they didn't already know which was which.
    Andy

  • K1 Question about Camera Quality since 3.2.1

    Can anyone confirm if the image quality of video (as opposed to stills) shot using the front-facing camera has diminished under 3.2.1? I'm noticing a much more over-exposed ('solarized') effect on video this past week. For example, I have noticed a cartoonish blotch (of sunglight) on my forehead with 3.2.1, whereas in 3.1, it just looked like more natural sunlight.
    I know that Lenovo updated the video software with 3.2.1, as the Youtube quality on both the front-facing, and rear-facing is no longer 16:9, but rather 4:3-ish. 
     I suspect they did something to the exposure, too. Any confirmations that video shot with 3.2.1 appears 'worse' would be appreciated. 

    I did a 3.2.1 install just a few days ago.
    On page 56 of the OVM 3.2.1 install guide is this:
    +"When Oracle VM Manager is upgraded, you must upgrade all the Oracle VM Servers managed by that instance of Oracle VM Manager before you can return the Oracle VM environment to normal operation. Rolling upgrades of the Oracle VM Servers is supported, but Oracle VM Manager and all Oracle VM Servers must be at the same software revision level during normal operation of the Oracle VM environment, for example, Oracle VM Manager and all Oracle VM Servers should be running Oracle VM Release 3.2.1 Beta."+
    So I think that means an OVMM running 3.2.1 can only manage OVM 3.2.1?
    I did upgrade a lab 3.1 to 3.2.1 the other day, however post the upgrade there were issues, the version of the servers that had been upgrade still showed as 3.1.
    Do I decided to re-install and the problems went - however a whole new bunch showed up!
    Jeff

  • Question about camera file generator

    Dear all,
    I was trying to set up my camera with the frame grabber using camera file generator. My camera is a linescan camera, which is 1024x1 pixels.
    My question is, in the camera file generator, I can choose to display maximum number of rows which could be any number I key in, for example, I can choose to display 1024x256 or 1024x800.So since my camera has only one line of pixels, where are all the other rows come from?How does it work?
    Thanks a lot!

    Hi
    When you create your icd file, the height value, will be the maximum number of lines you can accumulate.
    So when you will use your camera with MAX or LabVIEW, you can specify an image height within 1 and this value.
    I suggest to set this value pretty high (10000 lines for instance) so that you are free to request a big image in your application.
    Regards

  • Upgrade questions about Prime Infrastructure 1.1.1.24 to 1.3

                   My existing NCS is installed with the small deployment and I'll have a total of 94 AP's but we are installing a new data center and replacing the existing 2 WISM blades for 2 new 5508 WLCs and added 20 more AP'S which will total 114 AP's and 4 controllers. The old WISMs blades and new 5508s will be up together until we migrate exisitng AP's to the new 5508s, so do I need to install the medium deployment since Table for Scaling Prime Infrastructure states:
    Medium: 500 Total. The mix of devices may included up to:
         Wired devices: 300
         Controllers: 5
         Autonomous AP's: 300
         Unified AP's: 300
    Small Deployments are for a total of 250 devices "with up to" 100 Unified AP's and 2 controllers?? 
    Also as part of the download of software for PI 1.3 it   includes Automated Deployment Gateway is this a required piece to install for PI??  We don't use Cisco works so I'm not installing the LMS piece. 
    thank you,
    Sandra

    Isn't it rediculous the message says:::
    Error(s): You must correct the following error(s) before proceeding:
    Error:Unknown Exception Occurred. If the problem persists send logs to Tech Support.
    And the fix is to use a different browser?
    BTW:: Good Idea to try a different browser.  By the looks of the Error Msg, it just didn't look like a browser issue to me so I didn't think to do that but certainly will next time on this and probably many, many, many other issues I see-
    We only spent about an hour chasing our tails around to see what the issue was.
    Again good catch!
    I was speaking w/ another customer today who mentioned if the application were re-written to use HTML 5 these type problems would go away.
    Oh well.
    Glad I could help you get all the way upgraded and all the way up and running and able to push templates to your lightweight APs.
    Cya

  • Question about camera compatability

    Hi,
    I bought a DVD Panasonic VDR-D200 camcorder only to find that it doesn't work well with iMovie 6 because it doesn't use Firewire, only USB. I've been hearing the term miniDV in the discussion forums and now I'm confused...how many typs of camcorders are there and what type is supportd by iMovie 6? Is miniDV a tape camcorder, I'm assuming? Any specific models that would work well with iMovie would be greatly appreciated. Please only give advicec if you're sure you know what you're talking about...this will be the second camera I'm returning for compatability issues amounting to $160 in re-shelving fees! What an idiot I am! Thanks for your time and help...By the way, I use a Powerbook G4 if that makes a difference.

    miniDV is a specific kind of tape format, have a look at any camera store or do some wiki… I estimate, 70% of consumer camcorders do use this format.
    (pic by wikipedia)
    any camcorder with miniDV plus firewire (Sony calls it iLink) should work with iM.... (and socalled Digital8 too, but that is an older standard... actual cameras are miniDV); I did own a Canon, now for years using a simple but excellent SonyTRV14…
    no, iApps don't support DVDcorders, mpeg4, flashmem, harddrive, solid state, whatsoever cameras...
    Please only give advicec if you're sure you know what you're talking about..
    me sure? ... mostly ... failed often, but still self-confident...

  • Two questions about Camera Raw and Lightroom

    I am now shooting in RAW image format only and cataloging those images into Lightroom.
    My first question is: How do I open an image in Camera Raw from Lightroom? When I right click on an image in Lightroom it gives me a choice to edit in > Photoshop, but does not offer the choice of editing in Camera Raw. In fact, when I go outside of Lightroom and just double-click on one of those RAW images, it opens in Photoshop. What is going on? Before I installed Lightroom, double-clicking on a RAW file would cause it to open in Camera RAW.
    My second question is: Lightroom seems to have all of the same controls over processing a RAW image as the Camera Raw plug-in does. Does that mean I no longer need to open images in Camera Raw? Should I just do all of my adjustments inside of Lightroom? I take it that the sidecar xmp file is the same whether modified in Lightroom or in Camera Raw.
    Pleas set me straight on this.
    Thank You,
    Ken

    Your second question:
    My second question is: Lightroom seems to have all of the same controls over processing a RAW image as the Camera Raw plug-in does.
    Answers your first. Lightroom and ACR share code, so the rendering you get from Lightroom with the same settings is exactly the same as in ACR. What happens is that when you say "edit in Photoshop", ACR gets called by Lightroom and the Develop settings get passed along. ACR then renders the RAW with those settings and opens it in Photoshop. So, because you already have a working interface to the settings, there is no point in showing them to you again.
    Does that mean I no longer need to open images in Camera Raw? Should I just do all of my adjustments inside of Lightroom?
    That depends on your workflow. I no longer open any images in ACR directly as Lightroom provides a more effective interface in my opinion. Other people I'm sure prefer the Bridge/ACR approach.
    I take it that the sidecar xmp file is the same whether modified in Lightroom or in Camera Raw.
    Lightroom does not modify the sidecars by default. All edits are stored in the database. This allows you to have virtual copies with different Develop settings and more tricks like that. You can have Lightroom write out xmp sidecars by choosing "save metadata to file" from the metadata menu in Library or by turning on automatic xmp file generation in preferences. There is usually no real point to doing that however as the "edit in Photoshop" route works just fine. It's only really useful when you have a mixed workflow that still uses Bridge. If you share images with others, you're better off exporting dngs, or exporting subsets of images as catalogs with the images included.

  • 6280 stupid question about camera

    Hi
    I've just bought a 6280 phone and know very little about new phones. Could someone please tell me what the checkerboard indicator is on the left of the screen when I use the camera. Thanks very much, Lisa

    Thanks Gun for the answer,
    This transaction type shows the Organization tab in GUI environment (the settings related to org profile are correctly customized). The problem is in webclient. When I try to create this transaction type in webclient, the only sections which I can fill are:
    General Data
    Texts
    Partners
    But the others tab are missing in screen.
    I created a transaction from IC web and then in GUI environment the tab Organization is correctly filled and the tab is shown. But, what if I want to change the automatic determination in web environment?
    Regards
    Javier Merino
    Message was edited by:
            Javier Merino Vivar

  • First-time mac user needs (probably easy) answer to question about camera

    so i got my first mac yesterday, an i-mac with the built in camera. could someone please tell me how to take pics like i took of myself when i first did the set-up? sorry if i'm a bone head and the answer is something really simple. thanks in advance!

    Welcome to Apple Discussions, grumpysmurf011
    If all you want to do is make aquick snapshot, you can use your Photo Booth application and its "Normal" effect.
    Many other applications can make also snapshots, but Photo Booth is about as simple a way as there is.
    If you are specifically asking how to change your account (set-up) picture,
    you can also do that from within  > System Preferences... > Accounts.
    Please post back and explain in different words if I have missed what you want to do.
    We will try to offer suggestions based on the details in your response.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • Motherboard upgrade, question about compatibility with existing hard drives etc.

    Hi, I currently have an K8N Neo2 Platinum socket 939 board, 2 gig of OCZ Platinum PC3200 DDR400 RAM, a Lian Li V1000 ATX case, an AMD Athlon 64 3000 processor, 2 Sata 1 hard drives and a TAGAN TG380-U01 380W power supply. All this stuff is from around 2005.
    I'm thinking of upgrading my board to a MSI 870A-G54. Obviously I'll need new memory and a new processor, but my question is this - will I still be able to use the Lian Li case, and the Sata 1 hard drives/power supply with the above board? Also, does it have onboard graphics or will I need a dedicated video card?
    Thanks,
    Chris

    Quote from: russianpolecat on 05-May-11, 07:19:26
    Hi, I currently have an K8N Neo2 Platinum socket 939 board, 2 gig of OCZ Platinum PC3200 DDR400 RAM, a Lian Li V1000 ATX case, an AMD Athlon 64 3000 processor, 2 Sata 1 hard drives and a TAGAN TG380-U01 380W power supply. All this stuff is from around 2005.
    I'm thinking of upgrading my board to a MSI 870A-G54. Obviously I'll need new memory and a new processor, but my question is this - will I still be able to use the Lian Li case, and the Sata 1 hard drives/power supply with the above board? Also, does it have onboard graphics or will I need a dedicated video card?
    Thanks,
    Chris
     Case, HDD - Yes
     Onboard graphics - No
     PSU, maybe but probably not. Something with more power would probably be wise to get. What PSU you get would depend on the CPU & graphics card you get.

  • Question about camera raw. Need to edit Canon 60D Raw files in CS5.

    I downloaded the program camera raw. folder could not find the installer program. I do not know how to install the camera raw.in the past with these programs had no problems. what version of the program is suitable for Photoshop cs5 and camera canon 60d?

    canon eos 60D needs cr 6.2 or better.
    ps cs5 can be updated to 6.7 so you should be ok.
    the best way to update is to click help>update in photoshop.

  • Question about Camera/Premiere Settings for Slow Motion Video

    I'm new to shooting video with cameras that have manual options, so I'm not exactly sure how I should set up the camera settings. It's a Canon 60D. Basically in the video I want to make, I'd like to have a lot of normal speed to slow motion transitions. Some of the video footage will be very fast paced, so I'd like to slow it down as much as possible without making the video appear jumpy. I assume I should change the frame rate on the camera to 60 fps. Is there anything else I should adjust within the settings?
    I will be editing with premiere elements if you know of any additional tips for that.
    Thank you in advance!

    The speed of your camcorder doesn't matter. You can apply Time Stretch to any video clip.
    There's a limit to how much  you can slow it, of course. With that camera and Premiere Elements, you're not going to be able to slow down a water spray so you an see the individual droplets or anything like that. But, if you combine TimeStretch and Frame Blend, you should get very good results slowing your footage down a certain amount.
    How much you can slow it and still be satisfied with the results is kind of a judgment call. So I encourage you to experiment and see what your tolerance is.

  • I have a question about Camera Raw plug in list Nikon D750

    My new camera Nikon D750 is not listed in the Camera Raw plug in List. Does this mean that photoshop does not support these NEF files?

    It's included in the 8.7 RC
    Technology pages:
    CC - http://labs.adobe.com/technologies/cameraraw8-7-cc/
    CS6 - http://labs.adobe.com/technologies/cameraraw8-7/
    Download pages:
    CC - http://labs.adobe.com/downloads/cameraraw8-7-cc.html
    CS6 - http://labs.adobe.com/downloads/cameraraw8-7.html

  • Firmware upgrade question about Photosmart 7520

    Hello,
    I just got my new printer today from HP and it is a HP Photosmart 7520 which is great.
    I was looking online and i noticed there is a firmware update in the support section.
    My question is my printer has firmware ELM1CN1409AR and on the HP site the firmware there is ELM1CN1320AR. Is my firmware the most current or the one shown on HP support site?
    If my firmware is older should I update the firmware or just leave things as is?
    I am not having any issues with the printer as of now, but I always check all drivers and firmware of all my products.
    Thanks in Advance
    Fred
    This question was solved.
    View Solution.

    as long as you are connected to a computer via USB...I doubt that you will experience the problems that are being SIGNIFICANTLY reported regarding the 7520.
    As you saw in my post that you referenced, with a USB connection, the intermittant scanning/printing problem did not occur.
    Also, please see my entry in the following post regarding the current firmware version vs what HP has posted on their support page:
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/7520-won-t-stay-connected/td-p/3954900
    the version currently installed in your printer, ELM1CN1409AR, is the latest (as of the date of this post) that any 7520 printer connected to a router will be automatically updated to.
    however, please note that for those of us using a wifi connection from the printer to a router, firmware version ELM1CN1409AR has not solved the intermittant connectivity problems.

  • Doing a upgrade,Question about pictures

    I have just received OS X Snow leopard and I'm just about to do the up grade from OS X 10.5 and I'm wondering if I need to back up my pictures or will they be transferred to Snow Leopard.

    You always need a backup of everything important on your computer. Or better, more than one backup. There is never, ever a time that you should be without at least one complete backup. Time Machine is simple and effective for the first backup. Get an external hard drive at least 50% bigger than your internal disk and turn on Time Machine. Make it your top computer-related priority.

Maybe you are looking for