HT4623 what do i do now that my ipad is stuck in restore mode after trying to update? i'm just sick.

updated ipad after syncing. now it's in lala land and i have to restore before it will come on. I DON'T WANT TO LOSE WHAT'S ON THERE.  HELP!                        

Since you' ve been performing regular backups your data should be saved.
iTunes: Backing up and Restoring iOS software
http://support.apple.com/kb/HT1414?viewlocale=en_US

Similar Messages

  • HT4623 My iphone is stuck in recovery mode after trying to update to iOS 7 something

    I tried to update to the newest update today through iTunes and now my phone is stuck in recovery mode?  Frustrated!!!!  How do I get out of it.?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

  • Ipod touch 3g 32gb is stuck in recovery mode after trying to update it what do i do

    when i plug it up to itunes it says to restore the ipod so i do but it just says error and turns the ipod off

    This writeup comes from the article referenced below it:
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • I have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

    i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?

    Be good to know what the diagnostic results are.
    I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
    iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
    tt2

  • My iPod touch is stuck in recovery mode after trying to do an update on it, what do I need to do to fix the problem?

    My iPod touch had an update that needed to be done when I plugged in it to the computer and iTunes. It came up with an error and then went in to recovery mode and that is where is is stuck at. What can I do to get in back to normal?

    Without knowing what the error message said all I can suggest is:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPod is stuck in recovery mode after failing to update to iOS 8.whatever and now won't connect to iTunes to restore?

    So yeah, got an iPod touch for Christmas and it's pretty much bricked it and I haven't even had it for a full month yet. Not amused. I've tried everything from reinstalling everything Apple related on my laptop to external programs that promise to kick that thing out of recovery mode. If there's any other way to fix it I'd love to know considering it won't show up in iTunes at all so there's no way for me to restore it. This is my first Apple product and I haven't found a solution to a problem that I've found dates back as far as 2012 with no semblance of a way to fix it. Though I've seen ways to fix each problem separately it appears you need one thing to be working to fix the other which is an issue.
    Okay I'm just ranting to but help would be appreciated

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" after trying to update to iOs 5.1 and receiving error (1).

    Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
    Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
    Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?

    From iPhoneWiki:
    Try changing the USB port (the back one of chassis is better) and restart computer.
    The installed version of iTunes may also be too old. Update iTunes.
    Also put your iPhone in DFU mode when doing the above and restore. It's a software error.

  • IPad cannot be restored unknown error 1; I tried to update my iPad 1 to new os5 by syncing to new version of iTunes and found a message that my iPad needs to be restored.  I tried several times and continue to get same error code unknown 1; how to fix?

    When trying to sync my ipad to latest version of itunes, it appears the ipad identity was lost and a message in itunes says to restore the ipad.  However, multiple attempts to do this continue to provide the "This ipad cannot be restored. Unknown error 1"  I have tried resetting my ipad which just brings back the screen to connect it to itunes.  I have updated all software on my computer and restarted.  No luck!.  Please help!!

    Thank goodness for this thread! 
    I installed iOS5 last night and was having the same problems described above with my iPad 1 32 GB + 3G.  Unknown Error (1) and was unable to restore. 
    I took my ipad to the local Apple Store today and was told by the genius that it was a hardware issue, and because the warranty had expired, there was nothing the Store could do.  He suggested that I try calling AppleCare.  Then I asked to speak with a manager.  He apologized again and said there was just nothing the Store could do.  I was close to leaving, when I asked a second time if it would be possible to see a Manager. 
    After asking a second time, he called a manager.  After explaining my issue to her, she immediately authorized him to give me a new iPad !   Anyone with this problem should definitely go to the store and be polite but adamant.  You should get a new iPad.

  • HT4236 my iphone 4 is in recovery mode after trying to update and sync to itunes, i was going to try to put the photos over from my phone but now it says i have to restore which will rease all data.. help?? precious phots of my baby!!!

    My iphone phone is in recovery mode after trying to update and sync in order to remove photos from it on to my macbook.  How can i restore without losing the photos?? please help i dont want to lose them!!

    Try holding the home and lock button at the same time and see if it'll restart. If you see the apple logo, let go and wait till it goes to the lock screen and your good(:

  • HT4623 After trying to update my phone just says itunes and will not turn on

    Tried to install update to 5C and it just says Itunes in the middle of the screen.  Cannot turn it on or off...stuck need help

    It is in Recovery Mode. Connect to the computer and iTunes and follow this support document. http://support.apple.com/kb/ht1808

  • HT4623 My ipad mini went to restore mode  after updating. when i try to restore downloading software gives error

    My ipad mini went to restore mode  after updating. when i try to restore downloading software gives error

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • My 2g i-phone is in recovery mode after trying to restore it with the latest i-tune version. it has a sim card ,but it wasn't activate it.I was just using with free wi-fi.what shall i do

    my 2g iphone is stuck in recovery mode after trying to restore it with the latest itune version. It does have a sim card but is not connect it ,I was only using it with wi-fi. Now i-tune will not connect it only show i-phone. I did manage to restore it again ,but then it will go back to restore mode.
    What shall i do now?
    Thanks

    Restore ?
    How ?

  • I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

    I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don't know what that signifies. Help?

    What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don’t know what that signifies. Help?
    It is recommended that I ask for help, which put me here. What I really need is some customer service — not a chat room!

    If Windows :
    Quit Creative Cloud desktop application .
    Launch Photoshop cc 2014 application from C: > Program Files > Adobe Photoshop CC 2014 .
    Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
    It should update.
    If Mac:
    Quit Creative Cloud desktop application .
    Launch Photoshop cc 2014 application from Applications folder:
    Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
    Let me know if you face any error .
    Error 49 occurs while updating the application , when Creative Cloud app  does not have reference / Access to installed CC app, so that it can apply updates for the same .
    You can try to update from CC app  like Photoshop itself and check.

  • What do I do now that I have down loaded LR 4 only to find out that it's not compatable with win. XP

    What do I do now that I have down loaded LR4 only to find out that it's not compatable with windows XP?

    Upgrade your operating system? Call sales support to return the package/ undo the purchase within the 14 day timeframe? Whichever you prefer...
    Mylenium

Maybe you are looking for

  • Is it possible to boot to a Windows 7 install DVD from an external USB drive on current iMacs?

    On the iMac I'm currently using, a mid-2007 24-inch, it's impossible to boot into a Windows install DVD from an external drive: I can hold down option on boot, and all my hard drives come up, but if the Windows disc is in my external DVD drive, it wo

  • Lost of Parameter file in web application

    Hi, We develop a java (1.5) application running on Tomcat (5.5 and 6.0). In this application, we use a parameter file in YAML format. Everything works perfectly except when the tomcat server is restarted. At this point, the application is no more abl

  • Print program for delivery output printing

    Hi, I need help with creating a custom smart form and print program for outbound delivery. 1. i want to know how to select data in my print program ? i mean how to i get the delivery number when the output type is executed. 2. What parameters are to

  • Incorrect display of images in PDF on iPad

    I have a problem with displaying images in a PDF on the iPad. The PDF is created from a MS-Word file on a PC. On a PC, the images in the PDF display OK. On an iMac, the images in the PDF display OK. Only on the iPad, the images in the PDF display wei

  • How to specify more than 6 parameters in the URL or in the HTTP header?

    After applying SAP note 1105368 ,it will be availible to specify more than 6 parameters in the URL  header. But i haven't figured out  how to specify it yet.even though i went through the note carefully, but it really hard to understand. Is there som