HT4623 What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?
What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?
Read http://support.apple.com/kb/ht1808
Similar Messages
-
My iPod has a white screen. After holding down the middle and menu button, the screen goes black then back to white and beeps twice. I have returned to original settings and resorted content to no avail. I still have a white screen. I have plugged it up and tried resetting again and again, still a white screen with two beeps - help.
I have the same exact issue. Fifth generation iPod Nano, blank screen, Restore had no effect. I'm running Windows 7 Home, with all software up-to-date. I suspect hardware damage. Any clarification would be appreciated. Thank you in advance.
-
what does it mean when you try to update i tunes and it tells you "itunes has an invalid signiture. the download has been removed"?
What kind of things are you seeing as disabled? The administration might have disabled some features because they don't fit in the structure of the community that has been built over the last few years. This community used to be based on a forum platform called Lithiu . At the beginning of the 2012 it was moved to a forum platform called Jive. It brought a lot changes to the community. Some of which many of us regulars are still finding after almost a year.
-
what does it mean when you're about to install itunes and it says This update requires OS X version 10.6.8 or later.??? i don't understand... Can someone please explain to me what that means...??? And how to fix it.
1. It means exactly what it says. Apple dropped support for earlier Mac OS X versions in iTunes 10.7.
2. Update the computer to 10.6.8. If it's running a Mac OS X version prior to 10.6, this requires buying a Mac OS X 10.6 DVD from the online Apple Store, which requires an Intel Mac with at least 1GB of RAM.
(93025) -
What does it means when you turn on the macbook and a file with a "?" mark flashes?
What does it means when you turn on the macbook and a file with a "?" mark flashes?
It usually means some system files are missing or corrupted. Reinstalling OS X is the fix:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
What does it mean when you get a "The iTunes library file cannot be saved. There is not enought memory available." ? And what can I do to correct it?
Well, I installed the latest iTunes this AM, works perfectly. Although for some reason it did lock up after playing a song today.
Horror stories? That's a bit overly dramatic.
No, it isn't.
The issue you are experiencing is one that has occurred in multiple versions of iTunes, a simple search would have revealed this.
A simple search was conducted, no one seemed to have an answer. Do you always adopt such a haughty attitude? Or was I just lucky. -
What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.
I don't have original discs that it came with.
Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
If it has a slot-loading optical drive like this one:
things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery -
what does it mean when you try to upload the version of itunes and it tells you the C runtime library was loaded incorrectly?, what does it mean when you try to upload the version of itunes and it tells you the C runtime library was loaded incorrectly?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
what does it mean when you get this message on the Iphone? "online maps consume data traffic"
That means that if you use online maps, it will consume data. If you're on WiFi, no worries. If you are on cellular data, then it will eat into your cellular data plan.
-
What does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled
hi
what does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled? this phone doesnt even ring, it just goes straight to the BEEP-BEEP-BEEP, its an iphone 4 and on IOS7 and it was ringing eailier on in the day when i spoke to this person. it wouldn't mean i have been blocked would it?
what does all this mean?
thanks
mrredrunner100i got my friend to message this person to see if they had the same problem, and the message went through and i think he got a reply, and all of a sudden this has started to work again (calls only) but apparently none of my messages went through that i have sent since the block activated. and they still havent even though there working again, and "apparently" a message was sent to me at 9pm today and it has never arrived. so imessage and text still isnt working, before i go asking this person about this, is this a genuine block or is there a phone problem?
-
what does it mean when you receive a text on your iphone 6 from your own number and the message is duplicated on each side (sent/received) and has "verizon message" with a long number at the end of the text, duplicated as well?
Great question stacybrownie! Let's get to the bottom of this so that it's not a cause for concern. When a message is sent to/from your own number, it will display as one sent, one received. This makes it display two messages as you are seeing. Let's clarify the second part of your question. Where do you see "Verizon Message" exactly? What is the long number at the end of the text? When did this start and is it with all text messages or only this instance?
AdaS_VZW
Follow us on Twitter at @VZWSupport -
.Hey I received an email saying someone logged onto my iMessage and FaceTime. Does that happen after you update the iphone? I just downloaded the new upgrade
I spoke too soon. I tried Facetime again last night and had the same problems. Another factory reset did not work. I think it may be time to just call Apple support.
-
My ipod keeps showing the apple logo on and off after i updated it?
my ipod keeps showing the apple logo on and off after i updated it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod touch does not turn on after steps 1-4. It only shows the apple logo and turns off
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes
No support for jailbroken phones will be given in this forum or from Apple.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and…
Maybe you are looking for
-
User exit for MIRO while saving
Hi I need to validate the Company code in Txn MIRO with the company code of the PO that's been processed Is there any user-exit which gets triggered while saving the document in txn MIRO. I know the following BADI INVOICE_UPDATE gets triggered while
-
UIComponent and serializable errors
Puzzling problem, but maybe someone else has had similar....I had a blank page dynamicly populated with a set of checkboxs, textfields etc according to db parameters, and to access the entered values after user submission, i found i had to bundle the
-
Dear Sir, when i run this pl/sql code its giving me error SQL> DECLARE 2 CURSOR c1 IS SELECT name, geom FROM parcels; 3 topo_geom SDO_TOPO_GEOMETRY; 4 BEGIN 5 6 FOR r IN c1 LOOP 7 topo_geom := SDO_TOPO_MAP.CREATE_FEATURE('SAMPLE_TOPO', 8 'PARCELS_T_T
-
Active and inactive states for a button
Is there a way to assign a button action only when the playbacket is on: i.e. lable "play3"on timeline instead of placing a hotspot over each button with code? Basically an active and inactive state. button1 exists on entire 30 seconds then only acti
-
All info gone after software update, how can i get it back?
New G3, notified me I needed to sync w/itunes to get the new update. After syncing, and various problems and errors, it said i needed to restore my iphone... everything would be wiped clean +but i could get it back+ after the update was complete. Upd