HT4623 what if the update does not show up

i tired to put the software iOS 5 on my iPhone 3GS but when i check for an update it says that my curerent verson (4.2.1) is the lastest verson. What do i do?

What Kappy said. You can verify your iPhone model by entering its serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
4.2.1 is the last version supported by the 3G, hence Kappy's supposition.

Similar Messages

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

Have the same issues here, 3GS 5.0.1. Did you find any solutions until today ?
I restored my phone, power up/down but nothing helps with my issues
greetings
/Edit:
Maybe I should read carefully your text so I can give you some more information.
my phone was updated via itunes.
some hours ago the phone charged up to 5% but than directly draining to zero...
can't help me with these issues...

I have just updated iTunes on my laptop, and now when i plug my iPhone in, the device does not show up in iTunes. I have tried multiple wires and uninstalling and re-installing iTunes. What do i do?

I've just updated my iTunes on my laptop
And when i plug my iPhone in, nothing happens and the device does not show up in iTunes
I have tried numerous cables, uninstalling and re-installing iTunes and searching for devices on iTunes
And i still have no luck
help!

Pick the appropriate one of these for advice:
Windows - http://support.apple.com/kb/ts1538
Mac - http://support.apple.com/kb/ts1591

I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

Yesterday I reset my settings on my iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

Try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, try restoring on another computer.

When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

I resolved the problem. It was somehow related to my using Microsoft
theme pictures. I set Windows to use the basic theme and the problem
went away. Thank you for the suggestions.
Jac

Today i purchased exportpdf. when converting from pdf to word doc, the text does not show up on word doc. what to do?

when exporting pdf into a word doc the text does not show up on new doc. what to do?

Hi hamsa142,
Is this problem specific to one file, or does it happen with any file that you convert to PDF? How was the PDF created (using what application)?
For starters you may want to disable OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community.
Please let us know how it goes.
Best,
Sara

HT4623 iOs6 update does not show up on iPad2.

I am trying to add an application and it requires the iOS6 update. The update is not showing up under my settings.
HELP!

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
Your iPad update to iOS 6.0.1, so you will lose the built-in YouTube app and the Maps app will change.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?

Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same.

When I attempt to import a CD the CD does not show up in itunes

I put a CD into my drive and the CD does not show up in itunes. As a matter of fact there are no import cd buttons in my itunes or in my file tabs. At first it was saying it was locating it but now nothing happens. I did get a new computer a month ago. I never had this problem before.

What format are the tracks?

I have an I phone 4s and I have many contacts in my phone. However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number. I have checked every setting I can think of ?

I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??

If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed.

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

HT4623 what if the update does not show up

Similar Messages

Maybe you are looking for