HT4623 What is a passcode and where does one locate it?

What is a passcode and/or Where does one locate it?

settings>general>passcode lock.
you can choose a 4 digit code to lock your iPad.
cheers!

Similar Messages

  • Firefox update installs, but does not apprearon screen, or task manger yet is running what is going on and how does one fix it?

    I installed the update Mozilla Firefox 28. It was suppose to launch upon completion. it did not appear on the monitor screen, nor the task manager, but was running; for when I attempted to install the older version again it, it said that Firefox was running and needed to be turned off.
    I restarted the computer and tried opening Firefox, with the same results.
    After restarting again, I attempted to reinstall the update, with the same results taking place.
    I attempted to uninstall Firefox and install the new version. The same results took place.
    In the past, I could install Firefox 27 update, only now I can't for the same thing takes place. Past a certain version (19), this event takes place, but 19 and older can install it with no problems.
    I checked Firefox troubleshooting information. All was normal. I checked my firewall. Again, all was normal. Tried Firefox reset. Did not help. Tried with my firewall disabled. Did not solve the problem.
    Ran a virus check (deep) no viruses. Checked my computer system. No errors.
    I can install updates for my other programs, even install new programs; just not Firefox.
    What is going on and how does one fix it.

    Hi Amseeking,
    Thank you for your question. From your description, you tried to install the 28 update from a version 19 installation. Did you install a fresh install of 28 successfully? Where the name of the file is"Firefox Setup Stub 28.exe"? This is what is sound like happened. When going to about Firefox and searching for updates it installs over the current installation. However if Firefox was already running, there are more than one installation.
    Updating from version 19 to 28 would not be a problem. However the user data from your previous version would have to be imported to the new installation if you have more than one install on that computer.
    An easy way to tell is to search for Firefox in the Start menu to see if more than one icon shows up in the search results.
    I hope this helps.

  • New E 550, what kind of SSD and where does it go?

    Sorry if this has been answered already (searched but couldn't find it) but I would like to add an SSD to my new E 550.  I was just going to do a swap out for the regular HDD with an older SSD I had but I found out that my older SSD is too large. So at this point since I need a new one, I was wondering if I could get an SSD that would allow me to keep the HDD as additional storage. Can I get an m2 or msata SSD?  And where does it go exactly?  Any warranty issues?  tks, Ty

    Appreciate the reply! I was hoping that there was a mini-PCIE slot like my older one but I wasn't sure if I could get to it (I opened up the panels underneath and looked to no avail) or if the WAN card was using it. tks again, Ty [Edit]
    Clicked the Maintenance Manual link you provided and found this.  2101 Detection error on HDD1 (Ultrabay HDD) 1. Reseat the hard disk drive. 2. Replace the Ultrabay® hard disk drive. 3. Replace the system board.2102 Detection error on HDD2 (Mini SATA) 1. Reseat the Mini SATA device. 2. Replace the mini SATA device. 3. Replace the system board. Or is this barking up the wrong tree?

  • HT6208 What is a passcode and where can you get it?

    What is the passcode for ios 7.1.1 and where can you get it?

    There is no passcode until you make one.
    Please get iPad and iPad mini User Guide (For iOS 7 Software)Sep 18, 2013 - 21 MB.
    If you've forgotten yours:
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • Email to 'hidden' accounts - what addresses are they and where does it go?

    Is there a list of hidden email accounts?
    I found a new one yesterday, 'uucp', and cannot find where it goes...
    Any ideas?
    Thanks
    BP

    well to partly answer my own question, from the postfix aliases file:
    bin
    daemon
    named
    nobody
    uucp
    www
    ftp-bugs
    postfix
    postmaster
    all these seem to goto root, which is where?
    then mailer-daemon goes to postmaster, which is also effecively root?

  • What is nidaqui.dll and where is it located?

    I previously installed a PCI-6025e and PCI-6733 cards on my Win98 system. The cards appeared on MAX2.2 and appeared to be functioning normally.
    Yesterday I opened MAX and both of these cards were missing. Only my PCI-GPIB card which has been mounted on the system for several months shows up. I then opened the device manager and was able to find the cards only by listing by connection type and looking on the PCI bus. Listing by type clearly omitted them.
    I tried removing the cards from the device manager and reinstalling them but I keep getting the message that nidaqui.dll cannot be opened so the installer quits. This is also what happens if I try to "add hardware" from the control panel. Any ideas?

    Hello;
    It's looking like the NI-DAQ installation got corrupted for some reason, and now both cards can't be recognized by the OS anymore.
    The best way to go about that is to remove both boards from your machine, reboot the machine, uninstall the NI-DAQ driver completely from Add/Remove Porgrams, reboot the machine, reinstall the NI-DAQ driver, reboot the machine and put the boards back.
    Since you had that working before, the reinstallation of the driver should fix the problem.
    Hope this helps.
    Filipe A.
    Applications Engineer
    National Instruments

  • Windows ME needs QuickTime but what do I download and where is it? Thanks

    Please let me know what download I need and where it's located for my Windows ME operating system? I did visit an Apple store in Santa Monica, Calif and they had no idea...
    Any thoughts? Would you recommend any software updates as well or just let it be?
    Thanks in advance,
    Bill V.

    http://www.apple.com/support/downloads/quicktime652forwindows.html

  • HT1338 What kind of cord do I buy to hook up my MacPro to my television monitor? And where does it plug in?

    What kind of cord do I buy to hook up my MacPro to my television monitor? And where does it plug in?

    Thanks, Matt. I have a laptop, so it looks like I need a mini-DP to HDMI adaptor that supports sound and a plain HDMI cable. Do I have that right???
    ER
    P.S. You're corresponding w an idiot writer here who only uses word processing, but it is SOOO much easier to do the few things I need to do on the Internet w my MAC. I was told over and over by other writersit would be better, and they were right. (Although there are a few issues for writers with the MAC.)

  • What is BAPI and where does it use

    Hi all
    What is BAPI and where does it useful for us. And as a functional consultant how much should i know it.
    regards
    Subrat

    Hi Subrat,
    You can get the information of whatis BAPI in SAP help link below...
    http://help.sap.com/saphelp_46c/helpdata/en/a5/3ec8464ac011d1894e0000e829fbbd/content.htm
    As a Functional consultent, it depends how close you are with the technical part of the implementation. if you are involved in some technical part, you need this information...
    Best Regards,
    Venkat.

  • "Account expired Renew subscription now to resume service." on my Mac with no source of ID. What is it and where does it originate?

    I keep getting this on my Mac with no source of ID. It keeps reappearing with no options other than "Renew Subscription". What is it and where does it originate?

    You have an account that has expired, but only you know what accounts you have.
    Check them.

  • Have Sony HDTV bought in 2003;the video in/out thingy doesn't fit the apple tv prong.  What can I buy and where to modify so I can plug in Apple HDMI cable?

    I have a 2002 Sony HDTV "ready" tv and am trying to hook up Apple TV2.  On the back of the tv, the connection point where the HDMI cable goes in does not match the Apple connection HDMI cable.  I'm guessing that I need some sort of connector that goes into the tv at one end and that will accept the Apple tv 30-pin HDMI cable  Is there such a thing?  What's it called and where can I buy it?  Thanks,

    Welcome to the Apple Community.
    The Apple TV specifications state clearly that a TV with HDMI connection is required. DVI is not necessarily going to work as a number of people have found out, although many others have been able to get it to work.
    A DVI cable may perform the same function as an HDMI cable for passing video signals but the hardware cards that it plugs into at each end may not.

  • What is "Directory Service" and why does it "use up 194%" ?

    What is "Directory Service" and why does it "use up 194%" on my istat CPU app monitor?
    Ever since I installed Leopard I've noticed this happening more and more - especially when I install an external hard drive or unplug my ethernet line - this is plainly weird and never happened under Tiger - the temperature shoots up to 84° also - I always to a restart to get rid of it but it's kind of worrying....anybody have any ideas?
    Message was edited by: Host

    Had this happen myself.
    It does have something to do with Spotlight/searching. Should go away after a while, or so I have heard from other users, 'cause it hasn't stopped driving me and my fan mad yet.
    Am going to have my MacBook index and follow-up on indexing and whatever else it feels is necessary to finally allow me to search in peace over the weekend while locking it away where I can't hear it.
    Hopefully that does the trick.
    If it wasn't for things working better/faster and most things looking better I might actually consider taking Leopard off again ...

  • What is application memory and why does my macbook pro keep running out of it?

    what is application memory and why does my macbook pro keep running out of it?

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

  • I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

    I have a MacAir, mid 2011 model, and want to view video on my TV.  I see that I need a mini display port to Hdmi but there are many of these.  What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

    Welcome to Apple Support Communities
    That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
    This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

  • I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

    I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

    Presumably the mains cable, which you can get from an Apple Store.

Maybe you are looking for