HT4623 when i finished downloading a usb cable and itunes logo appered so i plugged it in the itunes and it said i should take it out from recovery by restoring it.it took 3 hours but at last it didnt download what should i do?
when i finished downloading a usb cable and itunes logo appered so i plugged it in the itunes and it said i should take it out from recovery by restoring it.it took 3 hours but at last it didnt download what should i do?
Try holding the home and lock buttons until the iPad reboots. If it does not start up normally, then you will have to restore. To avoid any longer downloads, go to here: http://www.ipswdownloader.com/download-ipad-ipsw-files.php
and look for your iPad and download the latest firmware. When done downloading, make sure the file is in a easy place to get to. Then, go on iTunes and connect your iPad. Hold your shift key, and press restore. Locate the .ipsw firmware and restore. Make sure no programs are open during the restore proccess as it may interfere.
Similar Messages
-
Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display? -
i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use
That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?
This is the solution to your issue.
I wish you the best of luck.
http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU -
I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?
Are you connecting your iPhone directly to your PC or to a USB hub?
-
when ipod starts up, shows usb cable to connect to itunes then asks for my lock password but cannot get into ipod to put in password. any ideas?
You may need to connect the iPod in Recovery Mode and then restore it via iTunes. See this article for instructions on getting your iPod into Recovery Mode.;
http://support.apple.com/kb/ht1808
B-rock -
my iPod touch was frozen for a several hours and whe i hooked it up to iTunes, it has the USb cable and iTunes logo. ITunes says i need to unlock my iPod, but i can't do that if it has the logos and stuff...what do i do?
See Here
http://support.apple.com/kb/HT1808 -
I just received my iPad2 today. When I turned it on it only showed a USB cable and the iTunes icon. What does this mean?
The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer running iTunes (version 10.2 +).
Getting Started guide : http://support.apple.com/kb/HT4053
The iPad manual, which also has a chapter on getting started can be downloaded from here : http://support.apple.com/manuals/#ipad -
My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on and then loses the connection with itunes and at the end of the download it just asks me to restore it again.
Be prepared to lose everything on your iPhone but it should be backed up in iTunes so you can restore from your backup.
Try Recovery Mode... http://support.apple.com/kb/HT1808 -
When my iphone was updating it operating software, the USB cable came out of the port. Now the screen will only show the USB cable and the itunes icon. It is not recognized by the itunes store. I unintalled the USB driver for the iphone, but it still does not work. I have turned off the phone and performed a reset.
Try another Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons. If still problem you should Restore your iPhone with iTunes on computer. Here are simple steps. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore Button of iTunes.
-
i updated itunes 11.1 yesterday and now im trying to get my music on itunes to sync onto my iphone 4s but when i connect it through usb...Itunes is saying " waiting for changes to be applied"? so i dont know what to do cause i just want to sync my music from itunes to my iphone 4s
I had the same problem and the fix was so easy that I felt a little silly after spending 2 hours with an Apple Technician. At the end of it all, what I had to do was make sure ALL music was deleted from my iPhone 5 by going into usage and clearing out the music folder. All I had to do then was turn my phone off and turn it back on again. I had not done this after my phone upgraded to the new 7.0 IOS. What's the first thing you do when experiencing computer problems? Reboot! It fixed my problem and now my iPhone 5 synchs perfectly when I had it connected to my computer. I am also on iTunes version 11.1.
-
when i turn my iphone on it comes up as itunes and the usb cable and i have tried everything but its not working its just saying to restore my phone and i have tried but its not working
The device is in recovery mode. Connect it to a computer and restore it.
-
I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!
Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/ -
I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?
The 2nd generation can not be upgraded beyond 4.2.1.
Maybe you are looking for
-
JDBC to IDoc ( error when mapping multiple JDBC records to IDoc)
Hi, I am working on JDBC to IDoc scenario, I have declared row as 0 to unbounded and by default the IDoc structure is 1..1. Inorder to map multiple rows from JDBC to get multiple IDoc's, I have changed the occurrence of IDoc in "Messages" tab of Mess
-
Unable to open pdf-files in safari,
Hi there.... since awhile I cannot open pdf files anymore in safari... and apparantly i'm nt the only one... does anyone have a solution?
-
Hi all, What is Infopackage Groups and what are the settings in side thanks in advance regards
-
No one has been able to help me with my Creative Zen...and when I say this I MEAN it. I think the problem is that I may have erased a driver or something because my computer doesn't recognize my player no matter how many times I install and uninstall
-
Material wisw & item wise report in BW
Hi, In MM I have a requirement like this Material Grp Amt HeroHonda 1000 -Motors 500 -Cars 500 Now the requirement is in R/3 report they can see the output based on Material grp only i.e they can see Om material grp He