HT4623 When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.

When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.

Perhaps, iTunes can't communicate with the Apple uodate servers. Temporarily disabling your firewall and antivirus software would help. Take a look at this.
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support

Similar Messages

TS3274 Every time I charge ipadmini it turns off and I have to force it to turn on.it gets stuck on the apple logo. I have restored 2 times already but nothing seems to work.

my ipadmini has been having a problem whenever I charge it through the mains. I took it to an authorised reseller and they said it could be an hardware issue.
After two days I went to check on it and it was able to connect to iTunes and I restored. But this has not fixed the issue. Every time I charge it, it goes off and to put it back on it would not respond unless I have my finger on home button for a long time. I have changed my USB port and even the adopter.
I have erased all data and reset it,but same problem again.
Does someone have a clue on what I should do. Because this is getting ridiculous.
Please help me.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

When trying to update my iPad to version iOS 7.0.04 I keep getting 'Unable to Verify Update' message 'Because I am not connected to the Internet'. I am connected. I have reset iPad, reset Internet connections but to no avail?

When trying to update my iPad to version iOS 7.0.04 I keep getting 'Unable to Verify Update' message 'Because I am not connected to the Internet'. I am connected. I have reset iPad, reset Internet connections but to no avail?

Boy sure what you are doing but the current iOS level is 7.1 not 7.0.4.
You cannot update to 7.0.4.

Keep getting error message while instaling software updates

i just receive my imac from apple store after they fix my HDD , my imac is using version 10.6.8 and have 2.66 GHz intel core i5 prossesor also have memory 12 GB 1067 MHz DDR3 , i had problem before with my imac and i sent it to apple store to fix it , after they fix it ( they said) i wont have any problem anymore with my imac , and when i try it at home, i used migration assistant to get back my old data to my fixed imac, and now everytime i try to update my imac from software update on apple icon, they can downloading the updates but when i click instal and restart my imac can not installing the updates, keep getting error instaling update on my imac.
anyone can help me with this?

This is just a guess, and it may not work, but it won't make things worse.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Copy or drag – do not type – the line below into the window, then press return.
defaults delete /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
You can then quit Terminal.

My computer won't charge. I have tried many different chargers and resetting the SMC and the PRAM but nothing seems to work. Any Suggestions?

help

Battery Information:
Model Information:
Serial Number:          SMP-ASMB016-38d2-7ca
Manufacturer:          SMP
Device name:          ASMB016
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0110
Hardware Revision:          0200
Cell Revision:          0400
Charge Information:
Charge remaining (mAh):          462
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          4327
Health Information:
Cycle count:          679
Condition:          Good
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          11121
It is currently plugged in but the charger light is off. its like that for the 3 different chargers i tried from friends

When I try to install my Brother MFC-8810DW printer through a wireless network I get error:-30886

When I try to install my Brother MFC-8810DW printer through a wireless network I get error:-30886. The computer recognizes the printer, and asks me to identify the software, but I get the same error message repeatedly.

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Trying to find software update which will allow me to connect with ipad

Trying to find software update which will allow me to connect with ipad

From the pictures I found, there should be two ports on the back - a firewire 400 and a serial port. But I'm not clear how many variations of this duet there may actually have been (there is also a duet 2 I saw, but that is clearly distinct from the duet).
If your ports look like that, regardless of the cable, that port on the right is a standard firewire 400 port. The one on the left looks like a standard serial port to me.
So it seems to me a firewire 400 to firewire 800 cable - http://store.apple.com/us/product/HA833ZM/A/belkin-firewire-800400-9-pin6-pin-ca ble-2-m66-ft coupled with a firewire 800 to thunderbolt adapter should work for you - http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r?fnode=51
They actually have those at the stores usually, so you could take the duet to an Apple store, tell them what you believe you need, and then make sure with them before you actually buy anything.

I am not able to set up my ipad2 - tried the regular help but nothing seems to working. itune simply wont detect the ipad

i am not able to set up my ipad2 - tried the regular apple help - did all those routines - but nothing seems to working. itune simply wont detect the ipad

http://support.apple.com/kb/TS1538

Regarding Pages: I can't access the document I was writting on at all. I have tried to send the document to my email, I've tried to make a copy but nothing seems to work, it just shows up blank.

Regarding Pages: I was writing using the app Pages when I left the page I was writting on but now I can't access it at all. I have tried to send the document to my email, I've tried to make a copy but nothing seems to work. The document still exists and I can see my writting as I can with all other documents but I can't open that page.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect the iPad to your computer and try to get the document via File sharing
- Try getting the document from iCloud.com if you are using iCloud

HT201210 Trying to restore ipod and keep on getting error message: the ipod software update server could not be contacted. the network connection was reset

Hello can someone please help? Trying to restore ipod and I keep on getting error message: The IPod software update server could not be contacted. The network connection was reset. Make sure your network is active and try again.

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

I keep getting the message itunes has stopped working I can't even open itunes I have tried uninstalling and installing, starting in safe mode but nothing seems to work. Please can anyone help me

I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.

If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

I'm using imovie 10.0.3 with OS x Version 10.9.2. or some reason I can't double click on iphoto events to siadplay the pictures within that event. I've rebuilt my iphoto library, but nothing seems to work. Any help would be appreciated.

I'm using imovie 10.0.3 with OS x Version 10.9.2. or some reason I can't double click on iphoto events to siadplay the pictures within that event. I've rebuilt my iphoto library, but nothing seems to work. Any help would be appreciated.

Hello All,
Also no answer but am having the same problem. All my catalogueing via folders is up in smoke and no external HDs (where I would normally directly store raw footage when importing) showing up on the iMovie interface. It is a pain the arse to go back to the earlier version - why APPLE, pray tell, do you continue to lower expectations user-friendly functions. Shall try the option+open for a library but this too is extremely inconvenient if it works like iPhoto because you have to log out to log in to a new library whereas I just want to be able to see my multiple HDs directly from the iMovie menu and then the folders within folders I have layered in there - to make it easy to FIND STUFF. Wake up Apple, you are NOT meeting your customer's needs or desires.
Thanks to the posters who are helping the rest of us lost in the dark with possible solutions - free fix-its for Apple which they don't deserve.

I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it. I've tried restoring it and restarting it but nothing seems to work.

I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it and I can not get out of the home screen. I've tried restoring it and restarting it but nothing seems to work. I've tried everything, is there anything I can do myself to fix it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

About three days ago my ipod said i needed to sync and so i did . when i did it stop working and the wifi is grey out and says no wifi . Ive tried rebooting it , reseting , restarting but nothing seems to work . Can anybody help me ? Please !

About three days ago my ipod said i needed to sync and so i did . when i did it stop working and the wifi is grey out and says no wifi . Ive tried rebooting it , reseting , restarting but nothing seems to work . Can anybody help me ? Please !

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

Hi everyone for about 2 weeks now i cant seem to get any search results with the mobile myspace app on ipod touch 4g i have tried clearing cookies and cache ,resetting ipod uninstalling and reinstalling but nothing seems to work any ideas?

hi everyone for about 2 weeks now i cant seem to get any search results with the mobile myspace app on ipod touch 4g i have tried clearing cookies and cache ,resetting ipod uninstalling and reinstalling but nothing seems to work any ideas?

- Have you tried going to the developer's support website/contacting the developer?
- Try a reset. It surs many ills and nothng is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

HT4623 When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.

Similar Messages

Maybe you are looking for