HT4623 When I was updating my iphone to the new iOS at the final part (when the syncronization is beind done in iTunes), it never finshed. It's been more than 1 hour and it says "syncronizing step 2 of 4". What to do in this case?
When I was updating my iphone to the new iOS at the final part (when the syncronization is beind done in iTunes), it never finshed. It's been more than 1 hour and it says "syncronizing step 2 of 4". What to do in this case?
Hi lucaloo,
Welcome to the Support Communities!
The article below may be able to help you with this.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers,
- Judy
Similar Messages
-
last night my iphone said it was overheated, and shut off. it has been over 24 hours and hasnt turned on since, not sure what i should do?
Perform a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. If this doesn't help, connect the phone to the charger and leave it for about 30 minutes and see if it comes on. If not, while it is connected try the reset I described first.
-
After update my iphone 5 to new ios, it's stop working and just show apple((( what to do?
After update my iphone 5 to new ios 7.0.3, it's stop working and just show apple((( what to do?
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I have updated my iphone 5 to new ios 7 and I did not like it so I like to restore back to old ios 6.1.4.
please let me know how to restore to ios 6.1.4.Downgrading is not supported.
If you do not like iOS 7 (as I don't), leave Apple feedback: http://apple.com/feedback/iphone.html -
Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
The screen is frozen while installing software updates. Say about 2 minutes and it has been more than hour. How can I cancel or do something about it? Is it ok to unplugg it? Please advise.
Really?
Is there no other option? No magic key combo that brings up a secret menu?
My imac just froze during a software update install and I too do not know what to do. -
i recently updated my iPhone 5 with new ios 6.1 and i realize that my 3g is gone can u plz help me how to turn it back?
im using wifi, but before setting it was like ---> General--->Cellular---->Cellular Data on/off & 3g on/off. but now i cannot find 3g on/off its gone
-
I updated my iPhone 4S to the new IOS 6 I like it but the problem I found the Wifi button it's not working any more it looks hidden , so what I should do to solve this issue ASAP
Tap Settings App > General > Reset > Reset Network Settings. See if fixed. If not, Restore Firmware with iTunes on computer. See if fixed. If not, all iPhone 4S have Warranty, make Genius reservation and take iPhone to Apple for resolution.
-
I just bought an iTunes card in Spain but now I'm in Switzerland and it says it's not valid, what can I do?
Sorry, but there's nothing you can do. iTunes Cards are valid only in the country of purchase. So you cannot use that card in the Swiss iTunes Store. Sell or give the card to someone back in Spain.
Regards. -
When i try to update my iPhone 3gs with new IOS and it won't restore and update
i Tried to update my 3Gs with the new IOS 5 and now it has the plug into itunes sign. I plugged it into itunes and it told me its in recovery mode and it needs to be restored. when i click restore i can only restore and update it but once it is don extracting the software and preps it for restore it tells me it has an unknow error. when i hit ok it tells me to restore it again. i tried all the troubleshooting steps none helped. Any ideas?
I have spent the better part of three days on this. Yesterday I took it to the Apple store and they looked at it and tried to DFU (hold the lock button for 5 seconds, then press the home button along with the lock button for 10 seconds, THEN, let off the lock button continuing til the 'connect to itunes' symbol.
They say that my phone has a bad memory module or logic board. Funny, it worked fine up until I updated. Seems to big of a coincidence to not be related.
The only thing that seemed to get access was using redsnow unlocking tool (my phone is NOT unlocked). I was desparate to try anything. I tried to load a different firmware but still no luck.
I have a blackberry through work that is paid for, so I guess its time to get rid of my iphone plan. -
help can't update my iphone 4s sprint to ios 6 because it exit automatically on about 75% of the installotion over the air and itunes ...
So what happened to the phone during the process? It should have gone black and restarted a couple of times and there would have been a white progress bar as the update installed. Sounds to me like you've downloaded the update file but not actually installed it. The quickest way to see version of the software is installed is to go to Settings-General-About and check Version.
-
Does the new ios 6 come with siri for the iphone 4?
Ok so i just downloaded the new ios 6. I like it but was hoping it to have siri. I have an iphone 4 and have been searching in settings for the siri. Is it just that the Iphone 4 does not have a fast enough processor as the iphone 4s?
Norman, I just updated my software on what I thought was my iPad2 and Siri is there & works. Is this possible? I purchased this last November (weekend AFTER Black Friday) and I did replace it about 4 months ago when the screen cracked (thank God for the accidental coverage plan). Is it possible they replaced it with the IPad3?? I'm curious now. How can I tell if it's a 2 or 3? I'm getting the upgrade to iPhone 5 next month. The iPhone 4 goes to the hubster.. hehehe
-
i tried updating my iphone to new IOS software on a power book G4 and now it says it cannot restore it, i will loose all my data and media files. What can I do?
You cannot sync an iPhone to an old obsolete PPC G4.
-
When my iphone was updating it operating software, the USB cable came out of the port. Now the screen will only show the USB cable and the itunes icon. It is not recognized by the itunes store. I unintalled the USB driver for the iphone, but it still does not work. I have turned off the phone and performed a reset.
Try another Reset, hold both Home and Power buttons until the iPhone restarts. This usually takes about 10 seconds of holding both buttons. If still problem you should Restore your iPhone with iTunes on computer. Here are simple steps. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore Button of iTunes.
-
I have been given a iphone and was told to restore setting so have done and its been hours and I need help
Press and Hold the Power and Home button until the phone shuts off and the Apple logo appears. Then see if you can get to the proper settings to reset the phone.
If that doesnt help Use iTunes to restore your iOS device to factory settings
Maybe you are looking for
-
Hello Friends, I have used SQVI for ABAP query but look slike it is only for inner join. Is there a way that I could do left outer join, or any other way. Please suggest. Ster
-
Pci 6601 for decoding renishaw and new encoder
i have a pci 6601 and scb 68 that was recommend for decoding a renishaw encoder. it works great for determing the position of the renishaw. the renishaw encoder type is rgh24x30a00a http://www.renishaw.com/en/rgh24-linear-encoder-system--6444 i would
-
ITunes not permitting music transfer/edit
I am running an iPhone 3GS on 3.1.3 and iTunes latest version. I recently had to wipe my computer completely (reformat) for various reasons. When I re-installed iTunes and plugged my phone in, my device was recognised and all the drivers installed co
-
Preivew video in photoshop cs6
how do I get photoshop to "render to ram" so I can preview changes in realtime?
-
why does my security question not have the rest link? I have my email there but it won't let me and I have tried 4 times already. Help?!?