HT4623 whenever i update my 3gs it locks and i cant unlock it because i cant download earlier version what gives.
whenever i try to update my 3gs i locks on me and i can't unlock it because i would have to download an earlier version of itunes which doesn't work can you help me?
You need a valid SIM card from the carrier to which the phone is locked. It sounds like you do not have a legitimately unlocked iPhone, and upgrading the iOS has re-locked it to the legitimate carrier
Only the carrier can unlock the phone.
Similar Messages
-
Umm my ipod is locked and i cant get it open what should i do?
ummm my iopd is locked and i cant get it open so what should i do?
You will need to restore it using iTunes.
-
HT204088 my ipod touch got locked and i cant download games now
whAT CAn I dO ?
No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
My ipod is on lock and i cant remember the combination
i acidentally put my ipod on lock and i cant remember the combination. what do i do?
Damon,
From your link;
"Unlocking iPod
You can unlock iPod in one of two ways:
1. Enter the combination on iPod using the same controls you used to set the combination. If you do not enter the correct combination, the digits onscreen flash red. When you enter the combination correctly, iPod will unlock and return you to the last viewed screen.
2. Connect iPod to the primary computer you use it with (the first one iPod synced with), and open iTunes. When you disconnect iPod from the computer, it will no longer be locked." -
I put my IPhone 4 to update but now is lock and showing error 3194, anyone now what to do? please.
Same issue, I hope someone on here can figure this out and share the information. I was on the phone with apple for over 2 hours trying to fix. I guess I have to make another call on Monday!
-
I updated my 3GS to os5 and set up icloud and it backed it up, although, the backup says incomplete. I turned off the contacts under icloud and they are now all gone off the iphone. How do I get them back? I feel like they are in icloud, because the contacts went to another iphone i have.
I did turn the contacts back on and it didnt work. I am hoping the wi-fi connection I am on at school is not compatible, and it will work when I get home. Thanks!
-
My iphone 3gs is locked and after paying it is unlock, but not showing network
My iphone 3gs is locked and after paying it is unlock from vodafone UK, but showing no service and searching network. Also after connecting itunes follwing message reflects
There is no SIM card installed in the iPhone you are attempting to activate.
Please disconnect and insert a SIM card in the iPhone.Did you get an email from vodafone confirming that the phone is unlocked? Did you put a SIM card in the phone? Did you complete the unlock process as detailed in the email? Did you restore your phone as new?
-
i just updated my 3gs to iOS5 and it keeps on saying cannot activate iphone.. after searching videos how to activate it.. i can't tap my three fingers because there is no clock showing on my screen. how do i go about it? help please.
i have the exact same problem and im still currently trying to figure out how to activate it
-
HELP. My iPhone 3GS passcode lock and forgot the passcode. How to get back?
HELP. My iPhone 3GS passcode lock and forgot the passcode. How to get back?
The only reason you use bluetooth between iPad/iPhone its to share the internet from iPhone to wifi only iPad.
In order to see the bluetooth connection, you must first enable the Personal Hotspot on the iPhone.
Then on the iPhone, open Setting s> Bluetooth.
Then open the Bluetooth on the iPad adn pair teh devices. -
I was updating my 3GS on iTunes and my phone has frozen, showing the apple symbol only, what can I do about this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPad is not responding. It does not unlock. I have a message: iCloud Backup, "This iPad hasn't been backed up in 5 weeks. Backups happen when this iPad plugged in, locked, and connected to Wi-Fi". My Question: plugged in to WHAT? locked, HOW? and how to connect to Wi-Fi when my iPad does not respond to anything I do with it? PLEASE HELP.
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use the iPad again.
The iPad makes a backup into iCloud automatically when it's connected to the network and it is been charged -
i updated to ios7 now i cant download new apps. what should i do?
Try a restore via iTunes. You need to put your device in dfu mode to let iTunes restore. If you don't know to put it in dfu mode, google it.
-
my mobile it's locked and i can't restore it or re-download the software again and it showing a message unknown error what do i have to do ?
Try to connect in recovery mode, explained here:
iOS: Unable to update or restore -
hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks
http://support.apple.com/kb/HT1808
Regards. -
i just updated my ipod 4g to ios 5.1 and i cant download apps a message pops up saying to type in password for caldav something something the thing is that i have no idea what my password is i never made an account for that so please help
Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.
Maybe you are looking for
-
ICloud doesn't sync between mac and iPhone...
Hello all. I have an iphone 4 and I macbook pro which I have just upgraded the OS to OSX Mountain lion. I have never really made use of icloud before, but intend to start using it as I intend to get an ipad soon. I have gone into icloud on both my ma
-
Using one public ip for ssh`ing to different internal servers using port-redirections
Hi, we are having a requirement to use the same public IP to ssh into different internal servers using port re-direction. So lets say from outside, if a user does ssh @ root 4.4.4.4 2222, it should go to a sshsrv1 and then ssh @ root 4.4.4.4 2223 to
-
CRM 7.0 BP Authorizations
Hi Guru's In CRM 7.0 WEb UI I want to restrict users access to a Maintain or Display BP's I want to be able to restrict based on: BP Type (Person, Org, Group) BP Partner Type Is there standard authority objects I can use fo
-
How to pass a string from a child thread to a parent thread ?
I have a Server class listening to a particular port continuously using TCP Sockets . Whenever a client connects to this server socket, a new thread is created to obtain the data from the client socket. The following code shows how this is done - imp
-
What are the keyboard commands to control Front Row
I'm new to Front Row and running it on a 17" G4 PC. Since it isn't remote-control compatible how can I navigate and operate Front Row with just the keyboard. I need to know what key strokes to use to do stuff.