HT4623 While trying to sync my ipad, it became stuck in the recovery mode and I get error messages when I try to recover
While trying to sync my IPAD with ITUNES, my IPAD when into recovery mode and I keep getting error messages when I try to recover it.
What might these error messages say?
Similar Messages
-
I removed the battery in my att iphone 4 (gsm) osi 6.2? when i turned phone on i got pug into itunes screen. I did that and it said phone detected in recovery mode click update recover butten so i did. everything started liek t was working, i tunes showes verifing with apple but never make it past that point. itunes gives error message 1602. tried fixes, got error 22 tried fixes got error 11, tried fixesand got error message 1602. i then got advice from friend who wrks with iphones. told me get inrecovery, turn off. take out battery for min at least and put back together nad then try. i could not turn it on so plugged into wll charger and screen showed osi 6 and slide bar. slid bar and asked for my pw. put in and low and behold icon on screen telling me to plug into itunes. Did that and got error messge 1602 again and itunes neer went past verifing with apple.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
Loaded the newest IOS and I get error message when trying to load I messaging and Facetime.
I have an Ipad mini 2 and I downloaded the software update IOS 8.1.3. Now when I try to use facetime and I-messaging it gives me an error message : (An error occurred during activation. Try again.)
I have tried turning the applications on and off, I have turned off the I pad and restarted it. I made sure I was on the Wi-Fi. I even made sure the date and time zone were correct. None of these things have made any difference.
Does anyone have a fix for this problem. Is there a way to reload the last IOS update? Any help would be appreciated.
PeterHey Peter Manring,
It is my understanding that you are receiving an activation error when attempting to use FaceTime or iMessage. I have an article that should be able to help you address this issue, and it can be found below:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
http://support.apple.com/en-us/HT201422
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
my ipad has been stuck in a recovery mode and i cant restore it through my laptop due to less internet speed. can i submit it to apple store? will they make it alright?
Hello Elliiee,
The steps detailed below can help stabilize your iPhone.
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If the display turns on, go to step 4.
If the display remains black, go to next step.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?
Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again. -
my iphone 5 is stuck on the recovery mode and everytime i tried to restore it , it said that my phone have error 21, how can i fix it or send my phone to the appstore ?
Follow this one as well...
http://support.apple.com/kb/TS3694 -
Hi, I'm trying to get ot of the recovery mode and iTune give me always different errors. How i can get my phone out of this mode ?
http://support.apple.com/kb/ts3694
I hope this article helps -
My iPad 2 is Stuck in DFU (Recovery) Mode and I can't Restore it! PLEASE HELP!
Hello,
Let me start off saying thanks for reading this and hopefully someone on here can help me out! So my problem is I had left my iPad at my vacation house for quite sometime and I just got it back today. I have many different passcodes (one for my iPhone, one for my iPod and one for my iPad) and I had forgotten what it was for my iPad. I tried many different ones but I just kept disabeling my iPad for hours and hours. I know it was dumb of me for not writing it down somewhere, but lesson learned. Anyways, I decided to put my iPad into DFU Mode so I could try to restore it. Once I placed it into recovery mode, I hit restore on my Mac and everything was going great until this messaged popped up:
I have done tons of searching online to see how to fix this but all the ways have not worked. This is mostly because in my hosts folder, I don't have any errors.
Now I am stuck and I have no idea what to do. My iPad will not turn on since it's in DFU mode and I am not able to resotre it so I really need help! If someone could help me, I would really appreciate it. I know it was dumb to set it into DFU mode but it was my last resort and I know not to do it again. If you know anyone that coiuld help with this problem, please have them answer this because I really need help as soon as possible, I apologize for sounding desperate. Thank you to everyone that helps! I appreciate it a ton!Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.
-
When I try to add my Apple ID to Facetime or iMessage, I get an error message "username or password is incorrect " even though its the same username and password I use for everything else.
anyone else getting this problem?The Order has got 5 lines. First 4 lines are product lines and the 5th line is a service.
We have a customized form called mass order change which will bring only the product lines when we query a order. We usually do the mass update of shceduling date
and promise date in that form for all the order lines or for some perticular lines in that order.
For one order when i tried to update the scheduling date and promise date its showing this message. Not sure why??.. i have checked the form logic and the package which this form is using but all of them are calling the standard API process_order to change the sales order. I found out that This message is a standard Oracle message : OE_SCH_OVER_ATP_NO_SCH_ACT. I tried to find this message in process_order API but could'nt find this message. status of these 4 lines are : Awaiting Shipping
Thanks and Regards,
Ragni Gupta
Edited by: 921176 on Jan 21, 2013 5:17 AM -
Trying To Upgrade Phone - Getting Error Message When I Try To Upgrade to Incredible
I'm trying to upgrade to the incredible on the web site and it comes back with an error message. I tried all other phones and I could select them fine.
Thoughts?OK think I figured it out. says I need to change data plan. If I just get the pre-owned one it doesn't say that. time to call support.
-
Get error message when I try to sync after restore
My Ipod touch would not turn on until I hit restore, Now it will not sync. It gives error message 13019, What to do?
In the course of your troubleshooting to date, have you worked through the following document?
iTunes: Error 13019 during sync -
Lost connection to iTunes. I've rebooted, wiFi is fine. IBooks won't finish uploading. Should I upgrade to IOS6 or is this even a problem. Should I resync with my windows? Sigh...I am so lame.
Are you using the latest version of iTunes (11.0.2) on your computer?
If not, get it at:
http://www.apple.com/itunes -
How do you update from 4.2.1 to iOS 4.3? I can't download any applications...
This article will tell you how to update your iPhone 3GS to the latest iOS version, 5.1.1: iOS: How to update your iPhone, iPad, or iPod touch
However, if you have an iPhone 3G, then you cannot update past 4.2.1. -
I keep getting error message when I try to update my iphone 3g to ios saying iphone software update swerver could not be contacted
Turn off any antivirus and firewall programs and try again
-
I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.
Maybe this will help:
Troubleshooting
As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.
Maybe you are looking for
-
please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect
-
I have Mac OS X 10.7.5 and am using imovie 9.0.4. I have completed several projects just fine and one only last week. Suddenly, imovie has crashed each time I try to export or finalize a project. Once I recieved the Kernel Panic message that I must r
-
Is there a quick way to batch erase existing caption data on photo import?
I am new to Aperture coming from iView Media Pro. So far, it looks like Aperture has a lot more powerful capabilities for managing metadata. One thing I have noticed is that most of the photos I import have metadata already stored in the caption fiel
-
ALE-IDoc in WebDynPro Java - Is it possible?
Hi All, As we know we can create RFC function module to access R/3 data from WebDynpro Java, but I would like to know, is there any other way to access R/3 without RFC function module? Because I would like to get data from IDoc directly without using
-
When I turned on my computer today, the date and time were completely wrong. I then went to sign into familiar websites I use (gmail, facebook, etc) and both safari and firefox had pop ups that said that they could not "identify" and "verify" the si