HT4623 Why I cannot use the new feature of phone after I upgraded to ios 6???

I have already upgraded to iOS 6, but why I still cannot use the new feature of phone??
I cannot reject calls by sending them message.  What happen??

While ios 6 is compatable with the iPhone 4, many of its features are not available for the 4. The features need the 4s or 5. See here:
Turn-by-turn navigation is available only on iPhone 4S, iPhone 5, and iPad 2 or later with cellular data capability. Flyover is available only on iPhone 4S, iPhone 5, iPad 2 or later, and iPod touch (5th generation). Cellular data charges may apply.
Siri is available in Beta only on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Siri may not be available in all languages or in all areas, and features may vary by area.  Cellular data charges may apply.
FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a cellular network requires iPhone 4S, iPhone 5, or iPad (3rd generation) with cellular data capability. Availability over a cellular network depends on carrier policies; data charges may apply.
Offline Reading List is available on iPhone 4 or later, iPad 2 or later, and iPod touch (5th generation).
Made for iPhone hearing aids require iPhone 4S or iPhone 5.
Panorama is available on iPhone 4S, iPhone 5, and iPod touch (5th generation).
Find My iPhone and Find My Friends enable you to locate iOS devices only when they are on and connected to a registered Wi-Fi network or have an active data plan.

Similar Messages

  • Why cant you use the fingerprint to unlock phone after it is disabled?

    Is there a way to unlock your phone using the fingerprint scanner after it has been disabled?

    No - you will need to do the following: iOS: Forgot passcode or device disabled

  • I cannot use the chat feature in my Yahoo mail account

    I cannot use the chat feature in my Yahoo account using Firefox browser, yet I CAN use this feature when going through Internet Explorer. Why? I have uninstalled Firefox and reinstalled it. I have about a million copies of the flash player now installed...still, I'm frustrated by not being able to use the chat feature in my yahoo mail. please help!

    Hi
    On your iPhone, go the settings app. Then select Mail, Contacts, Calendars on the left column. On the right column under Accounts select your Yahoo mail account. A popup with show up and then you have to turn the the Notes switch to the off position.

  • Where can I learn how to setup and use the new features in Mountain Lion?

    Where can I learn how to setup and use the new features in Mountain Lion?

    MacWorld has a Superguide, TidBITS has Take Control books, and probably a flock of other publishers have physical books.

  • I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

    I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
    I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
    Can you please help me with this?
    Thanks Matthew.

    Hello,
    The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Are you using the new features?

    Some of you were very loud about getting certain features for PlayStation 4 and some even complained that they weren't available on day day1.
    You asked for suspend/resume, a media player, dlna, the ability to pause downloads and you got it.
    So are you using these new features?

    Suspend and resume... for endurance racing modes on PJ Cars...Theres no save race status, kill the game lose the hole  1 hour 30mins race... sleep mode is on so if you pause the game the PS4 powers down and saves the game status.... Tested DLNA don't need it allready used plex VIA web browser then the transcoding PS3 and PS4 app...Pause and cancel down loads used.  Music player use for PJ cars... As people stated if you Do not Use any thing then they vanish from the dynamic menu on PS4...Most are not even on the console untill a User hits the down load option... (technicaly you could use the youtube app to watch this...)   

  • Why can't we use the new feature..SIRI?  (on iphone 4)?

    Hello i'm Marcelo and i'm writing from Chile , i want to know that simple question.
    Because i updated my iphone 4 to the new ios5 , and i saw that feature wasn't included ..
    I think by my experiencie , i don't need a dual core CPU and a 7 times faster a graphic chip to have SIRIS..
    i hope an answe.. is just curiosity!..
    Bye.. GREETINGS FROM CHILE.

    I thought about this too, But after reading other people's post about Siri for the IPhone 4, Siri is still in Betaphase (supposely) and it is only availiable in the IPhone 4S. I heard that once the IPhone 4S has been released after a few months, Apple might update the software to have Siri be included with it. People says that the IPhone 4 is powerful enough to support siri on the hardware, but I guess apple wants people reactions towards siri first before releasing it with other software to other IPhone users.

  • HT4259 My old Airport Extreme cannot connect to the new Airport Extreme (Base) after I upgraded to the 7.7.1. firmware.

    The old extreme was working as part of the extended network when the New Extreme Base it had the 7.7. version, now amber just blinks away.
    I tried hooking up an Airport Express and have the same problem.
    Any pointers?

    Ensure that the ethernet is connected to the WAN port (with the dotted circle).
    You may have to reset and reconfigure your Airport Extreme.

  • Late 09 iMac.  Can I use the new features in Yosemite with this platform?

    I want to use handoff and other features, but I can't seem to get them to work.  Is it because of the age of my iMac?  if so will there be a work around for this?

    In addition, if you use older iDevices, like iPad 2 or 3 or an iPhone 4 model, these DO NOT support iOS 8 Handoff or Continuity features, either.

  • I cannot use the scrolling feature on my touchpad with Firefox

    Computer is Gateway NV52 Series with a multi-gesture touch pad running Windows 7 64 bit. Trying to use Mozilla Firefox 26

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • Cannot use the Tether Feature w/ Nikon D700 in Windows 7 Pro 64?

    Just upgraded Lightroom from 2.7 to 3.0, then to 3.3. Am using a Nikon D700 with Windows 7 Pro 64bit.
    Windows does see the camera, Lightroom does not see the camera. This same camera and USB cable do work fine on my MacbookPro snow leopard. i have searched the net but have not discovered a fix for this problem.
    HELP!!!
    greyscale

    Found the answer to this problem. The CF card in the D700 must have no images on it. I had three images on the card, and, after I deleted these, Lightroom sees and fires the D700.
    DUH!!!!!!!!
    greyscale

  • I cannot use the call feature with my contacts i always have to input each number manually anyone have a resolution

    hi there guys i have an iphone and have an issue i hope someone can help me with.
    If someone calls me and i store their number in contacts,when i go into the contact and press dial it comes back the number cannot be recognised,but if i dial the exact same number then i have no problems.
    I have switched off my siri incase this is an issue but it still causes me problems.
    Bit of a downer having to manually dial each number.
    Cheers for any info supplied

    * If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
    * Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
    * If items are missing then see if you can find them in the View > Toolbars > Customize window.
    * If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
    * If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
    See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
    See http://kb.mozillazine.org/Toolbar_customization

  • Why I cannot use the message

    Why can't I use message to sent or receive message or picture on my iPad 2?

    iOS: Troubleshooting Messages

  • TS1702 i cannot open the app store and itunes after i update my ios to ios6 on my ipad. what should i do

    can someone help me on how to open my app store? i cannot open it after i update my ipad 3 to io6.

    It won't pass 10.3.
    What does this mean?
    I figured it out. Thanks!!!
    What did you figure out? How about posting how you resolved it?

  • Why I cannot check the "find my mac" features on the iCloud? It says that "recovery system update required".. I'm using 10.7.2 now..

    Why I cannot use the "find my mac" features on the iCloud? It says that "recovery system update required".. I'm using 10.7.2 now..

    Run Disk Utility, and Verify Disk.
    You will likely notice errors that require you to reboot to the Recovery Partition, and run Disk Utility from there, to "Repair Disk".
    After running Repair Disk, reboot to the main partition, and run Repair Permissions from Disk Utility.
    Then install the Recovery System Update again.
    I bet your problem will be solved.

Maybe you are looking for

  • Background job not yet been Finished

    Hi, I have set a Background job today at 10:15 to start run at today 11:30 AM. it is a periodic daily process at 11:30 am. But when i checked the status of this job, its still in the status Released. i know that, this job will not take more then 20 m

  • Satellite A135 laptop reboots on it's own following normal shutdown

    My Satellite A-135 has begin rebooting on it's own after a normal shutdown. Running Vista with 1 GB ram, use Firefox 3.6 browser and all programs, Windows updates, anti virus, anti malware, etc. are kept up to date. I routinely run anti malware and A

  • Vendor Master Data F4 Search Restriction

    Hello SAP users In FK01. FK02 or FK03, when we press F4 to search vendor, I found there is no criteria for vendor group. Also, is there any suggestion to improve the performance of the F4 result searching process. Any suggestions? Thanks! Best Regard

  • Auto align & distribute objects in a grid?

    i love the align & distribute 'tools' i use them all the time. but it has always appeared thay they are only good for a single row of objects. is this correct or is it possible to select a 'grid' of objects and have them evenly aligned & distributed?

  • UndoTBS Management

    Hello Everybody, I have a script to import some data in my database (this script is based on imports with .dump files (two files which are approximatly 449 Mb and 40 Mb) and it is not working because of my undo tablespace's size. I can see it's full