HT4623 why is my iphone now wanting to be restored once I uploaded this?
Why i my iphone now wanting to be restored to original factory settings after uploading the most recent IOS I-phone fix?
I'm having exactly the same issue. I'm in the process of restoring to factory settings now as I use my iPhone as an alarm and need it to work to wake me up!!!
Similar Messages
-
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.How can i do it?Now I live in Myanmar(Burma).Please can you help me?........
<Personal Information Edited by Host>RichardRicardo wrote:
I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.
Sorry... But... The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.
There is No Workaroud for Activation Lock. -
Why are my iPhone 4S photos 2592x1936 instead of 3264x2448? How do I change the settings?
No worries, have now found what I needed in notifications.
-
Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario -
HT4623 Why does my iphone say "Activation Error" during the updating process?
after updating my iphone, the process is like asking the language, then the country, and then the wifi right? after i connected to the wifi, i pressed "next" then it says "Activating your Iphone" then suddenly it says "Activation Error". what does this mean? can i just restore the previous version of this iphone again?
You cannot install the previous version. "Activaton error" usually means that the phone was hacked or jailbroken to unlock it from the carrier it was locked to. It is now locked again to that carrier.
-
Why will my iphone 4 not connect to the internet on wifi nor data with the ios 6.1 operating system?
Settings > General > Reset > Reset Network Settings
-
HT4623 Why is my iphone 4 SO slow updating!!!???
Why is my iphone 4 SO slow updating!!!???
How much free space do you have? When was the last time you restarted the phone (Home & Sleep buttons held together)? Have you cleaned out unused apps?
All of these will diminish performance of your phone. -
Why does my iphone 4 want stay charge?
Why does my Iphone 4 wont stay charge?
Fayeee wrote:
My Iphone 4 only stays on for 10 to 15 min then switches off but I am able to switch it back on. But why does it keep doing this in the first place?
When you say "off" do you mean it sleeps and comes back on instantly when you press the HOME or SLEEP buttons, or really turns off, so when you turn it back on you have to wait a couple of minutes for it to boot? -
HT4623 i have 3g iphone i want to upgrade to 4.3.3 because facebook is not supported
i have 3g iphone i want to upgrade to 4.3.3 because facebook is not supported
You can not do so. 4.2.1 is the end of the line for the 3G. You will have to access it using Safari or get a new phone.
-
why is my iphone loged into someone else account and how do i change it back to mine
Settings > Store > Sign Out.
Sign in with your Apple ID. -
HT4623 Why does my iPhone 4 not have the Software update option when I go into the settings?
Why does my iphone 4 not have the Software update option when I go into my settings to get updates?
That was made available in iOS 5. To update, you may need to connect to iTunes
-
upgraded to ios7 iphone now displays itunes logo and usb cable will not restore, will not restart
Hi there emynona,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
My iPhone5 went into restore mode. I restored it and now it goes into restore mode at least once a day.
Restore as new. If the issue persists, take the device to Apple for evaluation.
-
Why is Adobe Flash now asking me to quit 'QuicklookUIHelper' during install? I never had this issue before I upgraded to 10.8.5! Is there an alternative to Flash if I want to watch Youtibe or play material that uses Flash? Thanks in advance!
http://hoyois.github.io/safariextensions/clicktoplugin/ and other extensions work if the website has alternatives to the Flash content (much of youtube does) but otherwise, no.
You may need to restart before installing Flash.
Maybe you are looking for
-
During 98% of the installation, it prompted the following message "the procedure entry point GetProcessImageFileNameW could not be located in the dynamic link linrary PSAPI.dll" I am on window XP and Explorer 7. Does it matter to ignore the message a
-
Network Printer connection between W2000 and Win 7 machine?
I have a HP 990CXI on a Win 2000 machine and I am trying to network connect to this printer from a win 7 machine but it cannot find a driver. The HP site says that Win 7 should have an in-OS driver. It seems that one is pointing the finger to the o
-
Urgent issue (Vendor down payment level) SAP-Fi/Co
Hi all..! Can anyone tell me this case at vendor downpayment..! I made the 10000/- down payment to vendor..! But i received invoice only 9000/-..! I want to stop the interaction with the vendor. then what about remaining 1000/-, and how can i clear t
-
My BH-504 won't boot ...
Hi, I've bought the new BG-504 bluetooth headset and I recieved it today. I tried it and it was fully working. But 1 or 2 hours later,it's impossible to start it again ... the battery is full (green light when plugged), but pressing the multifonction
-
Burned CDs only play on computer
I imported a cd,k and burned it to a blank cd, but that one won't play on any cd player, only on the computer! Is this because I foolishly upgraded to itunes 9?