HT4628 How-to Fix OS X 10.9 Mavericks – Wi-Fi Issue

Hello,
my MacBook doesn't login to my wlan-network automatically anymore.
It takes minutes until the list of nearby networks and the message "No known network available" appears, despite the fact that my network is listed. When i click on it, I am connected. How can I reset wlan settings, so that I am connected automatically as it should be?
Regards
Arwed

Howdy evenwerk,
It sounds like you are losing internet connection intermitently, and the only way to get connected again is to turn your Wi-Fi off then back on. The next time that it happens, I would use the Wireless Diagnostics to help diagnose the issue.
About Wireless Diagnostics
I would also recommend taking a look at this article to help set up your router with the recommended Wi-Fi settings for Apple devices:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

How to fix NTFS-3G on OSX Mavericks?

After upgrade to OSX Mavericks, I get error when I start up:
NTFS-3G could not mount /dev/disk0s4 at /Volumes/BOOTCAMP because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8). the MacFUSE file system is not available (71)
I need some help in fixing this error.

Allan Eckert wrote:
You need to discuss that with Microsoft because they are the ones who are forever changing the way NTFS works.
Which could be one of the primary reasons Aple will have nothing to do with NTFS.
Allan
This just seems like FUD to me - if by "forever changing" you mean "last changed in 2001" (v3.1 was released in 2001). Microsoft (at least to my knowledge) hasn't been changing the standard. The real issue is that the internals to either Apple's HFS+ or Microsoft's NTFS are openly available.
I thought this was solved back in 1999 or so when the iMacs could finally read "Windows formatted 3.5" floppies." It seems to have just gotten worse since then though. Unfortunately, the "standards" ChinaGamerGuy above points to are not openly available and hence there is little software (outside of windows) that reads NTFS. Linux supports it (the NTFS-3G code), but I don't think Apple would supply it because the code is GPL'ed.
And they have no motivation to, either. For both Apple and Microsoft it's just another way to provide vendor "lock-in". I wish we could just chose a standard filesystem for all computers (or at least open the standards up) so that we the consumers don't have to deal with this inanity and can just get on with using these system as tools...

How to fix "unable to purchase app at this time" issue

Since updating to IOS 7, I have been unable to download from the App Store. The message "unable to purchase app at this time, please try again later" appears and app's will not download.

Is your Device Jailbroken? Not that anyone would admit to it publically, but I think that is the root of your problem. Jailbroken apps like AppCake will cause problems. Good luck.

How to fix/backup my iphone 4s (more than one issue)

Basically, the screen smashed, so my partner replaced it for me.
Didnt do a back up beforehand (stupidly) and now ive got a few issues.
1. The touch screen does not respond at all.
2. It will only power on completely when plugged into the wall charger, it will turn off as soon as its unplugged.
3. When connected to the computer, the apple logo appears and then loops.
4. I cant get it into DFU mode to back it up because it loops so frequently.
I can get it into recovery mode on iTunes to restore it.
But i really need a note off there (at the very least) and all the photos
Its all baby photos
Please help.
Even if the phone will remain forever broke, i just want the stuff off it at the very least.

B3X17 wrote:
Basically, the screen smashed, so my partner replaced it for me.
Didnt do a back up beforehand (stupidly) and now ive got a few issues.
1. The touch screen does not respond at all.
2. It will only power on completely when plugged into the wall charger, it will turn off as soon as its unplugged.
3. When connected to the computer, the apple logo appears and then loops.
4. I cant get it into DFU mode to back it up because it loops so frequently.
I can get it into recovery mode on iTunes to restore it.
But i really need a note off there (at the very least) and all the photos
Its all baby photos
Please help.
Even if the phone will remain forever broke, i just want the stuff off it at the very least.
Sorry there is nothing you can do to get data off your phone.
Actually there is no data on the phone if it goes into recovery mode.
Lesson learn to backup on a regular basis or at the very least import pics to your computer.

Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ?? I want to transfer my contacts from 3gs to 5s

Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ??

I have had similar issues backing up to iCloud. Thy only thing I have found to work every time is backing up to iTunes and then doing a restore to my new device. That includes iPhone 6.

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Error 1004 try later. Anyone know how to fix?

Im trying t download a couple of apps from the app store and keep getting erroe 1004 try later. Does anyone know how to fix?

Hi SegersP ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My ringer volume keeps turning itself up to max and then the volume icon stays on the screen, anyone know how to fix this?

My ringer volume keeps turning itself up to max and then the volume icon stays on the screen, anyone know how to fix this?

I Have the exact same issue why is there still no fix?!?

My daughter and I both have an iphone 4, she can no longer send me msgs, it is showing as delivered on her phone, the wee bubble shows on mine to show she is replying to me but i am not getting the msgs, help, anyone know how to fix that? Thanks x

My daughter and I both have an iphone 4, she can no longer send me msgs, it is showing as delivered on her phone, the wee bubble shows on mine to show she is replying to me but i am not getting the msgs, help, anyone know how to fix that? Thanks x

Apple is having server issues, they hope to have it resolved in 24 hours.

How to fix the poor network reception in iphone 4s 5.0.1

How to fix the poor network reception,GPS location services issue & Battery life issue in iphone 4s 5.0.1

So I am guesing probably the iPhone signal reception issue came from the iPhone SIM card reader itself not adjusting to the SIM chip.
OK, here is the trimmed micro SIM card comparison:
Hope this helps!

A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M.

How I fixed my iTunes 7 / Nano 1.2 problem.

Like so many of you, I too lost the ability to connect my 4gb Nano to my iTunes when I upgraded to v7. Of course, Apple hasn't figured this out yet, but several here have.
Here is how I fixed mine. Once you connect the Nano (after the firmware upgrade), iTunes 7 reports it as corrupt and in need of a restore. The problem is that it won't. Try the following to fix the problem:
(note: this will reset your Nano entirely, and you WILL lose any music which is loaded on it. You will not lose whatever you have in iTunes).
1. Unplug the Nano USB cable and perform a reset on the Nano.
2. Restart your computer to ensure all services are running correctly.
3. Once restarted, open My Computer and plug in your Nano. Wait until it show's up as a disk drive (this can take several minutes).
4. Right-click on the drive which represents the Nano and wait again (up to several minutes) for the menu to pop up.
5. Select Format and (you guessed it) wait for the format utility to appear.
6. Make sure the File System is set to FAT32 then click Start. Do not click Quick Format. Wait some more (up to ten minutes. You'll see the progress bar move after a while).
7. Once finished, the Nano should now be recognized by iTunes. If it isn't, unplug it, wait a minute and replug it.
BTW, this retains the 1.2 firmware. I think the 1.2 firmware is incompatible with the data which written by previous versions. The format clears this data out.
As always, YMMV.
Good Luck,
Steve
HP Windows XP Pro P4 H/T

bump
I was having trouble seeing my Nano 2nd in iTunes and was afraid to do this step; but it works. My Nano was updated to version 1.1.1 and now everything seems to work perfectly. Keep in mind you will lose everything that is stored on your Nano when you format it.
Gateway 733mhz Windows XP

How to fix applepushservice.dll issues for downloading iTunes on Windows 7 64 bit

I recently had iTunes crash on my home PC, Windows 7 64-bit. I have tried several attempts to uninstall and reinstall the program and it still does not work and I receive error messages. The latest: The program can't start because ApplePushService.dll is missing from your computer. Try reinstalling the program to fix the problem. Problem is, the articles that I have seen state this is an Unknown source and my firewall will not allow it to be installed. The original error was a Windows Error 7 (registry & .dll issues). Any suggestions on how to fix this problem?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

Everytime this happens Ihave to power down and restart! Any ideas would be appreciated!

I updated Xcode 5 to Xcode 6.0.1. It messed up my previous apps and i don't know how to fix it. Is it possible to uninstall Xcode 6 and go back to Xcode 5?

Hello,
I updated Xcode 5 to Xcode 6.0.1. It messed up my previous apps and i don't know how to fix it. Is it possible to uninstall Xcode 6 and go back to Xcode 5?

I found this solution http://objcsharp.wordpress.com/2014/09/21/how-to-get-back-the-ios-7-sdk-after-up grading-to-xcode-6/

HT4628 How-to Fix OS X 10.9 Mavericks – Wi-Fi Issue

Similar Messages

Maybe you are looking for