HT4628 I did the security update on 4-2-13 and now my airport card will not turn on. OS 10.6.8 Intel imac 4,1 core duo. My macbook pro did not have this issue and wifi here is working on that. Is there a setting that was changed? Thank you!
Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
OS 10.6.8 imac core duo. The indicator is on the tool bar but is empty.
Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
OS 10.6.8 imac core duo. The indicator is on the tool bar but is empty.
Similar Messages
-
I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
ThanksNoooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!
-
Just got my new iPad Air and noticed that the screen calibration is off. For example if I select the circle to place something there I have to select outside of the circle to make it happen. I did not have this issue on my previous iPad.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If no fix, Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
Ever since I upgraded to IOS 7 on my iPad2, it does not remember my passwords, even though I check "keep me signed on". Is there a setting somewhere that I am missing? I did not have this issue with the previous OS. Thank you.
Thank you, James, but I do have a WiFi connection on the iPad mini. The Numbers files update on my iPad third generation and iPhone just fine when connected to the same network.
Do you have any other suggestions?
Thank you! -
since i have upgraded to mountain lion i get a popup whenever my system wakes up telling me that my external drive was not ejected properly. i did not have this issue with snowleopard. i leave my hard drive on and connected for use with time machine.
Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186 -
I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class. When going to settings under Bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution from Apple yet?
Hi susan from WSL,
Welcome to the Apple Support Communities!
I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article.
If you can’t use a Bluetooth accessory or car kit
Cheers,
Joe -
Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything
Hello eassic,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like Target Display Mode may be what you are looking for:
Target Display Mode lets you use a Mac as the external display for another “primary” Mac. In some cases, you can also play the sound from your primary Mac on the speakers of the external Mac. For example, a MacBook Pro could use a 27-inch iMac as the display and play its audio on the iMac as well.
OS X Mountain Lion: Use another Mac as a display
http://support.apple.com/kb/PH11302
Use an iMac with Thunderbolt as a display
If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
1. Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
2. Make sure both Mac computers are turned on and awake.
3. Press Command (⌘)-F2 on the keyboard of the external display Mac.
4. If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.
Thanks,
Matt M. -
Could this issue with not being able to copy and paste any image within the email body, be virus or malware related?
Though I don't think I have any virus problems. Also I have all the latest updates for Thunderbird.
I read some suggestions posted elsewhere and tried those but none of these worked :
DID NOT WORK #1 :
(If your Thunderbird email message is displaying strange-looking code (tags) after each link, images are missing (it looks like images have been stripped out), and the font appears different, or bold, then you’ve most likely changed the message body view inadvertently. To switch it back, simply:
Browse to View -> Message Body As -> and select Original HTML.)
DID NOT WORK #2 :
Email message looks fine, but doesn’t contain images
If the rest of your Thunderbird email message looks okay, but is missing images, or they appear to have been stripped out, it’s very possible that you’ve changed a setting that won’t let attachments (ie. pictures) appear inline (within the message body). To change this back, simply:
Browse to View -> and select Display Attachments Inline. )
DID NOT WORK #3 :
If you made the above changes to your Thunderbird settings and images still aren’t appearing in some of your messages, it may be that Thunderbird is blocking them because it thinks they are spam. To adjust your privacy settings and prevent the images from being stripped out, or not displaying at all (ie. being blocked), simply:
Click on the button to the above right of the email message asking you whether you would like to load images.
If the email message is from a trusted sender, you can click the link above the message specifying you would always like to load images in messages from this particular sender.
DID NOT WORK #4 :
If you’re still having troubles, or your changes aren’t being saved (ie. next time you open Thunderbird the images won’t display again) you can directly specify the default format Thunderbird should display email messages as in the config editor. To access it, simply:
Browse to Tools -> Options -> Advanced tab -> Config Editor
Search for mail.default_html_action and make sure it is set to 3 (allow original HTML). If you would like messages to open as text only (more secure, but you won’t see images, change the setting to 1).
Could you please suggest what possibly has caused this issue? Thank you for your time.Thank you for your response.
After searching around for any pointers to my problem, the above fixes I listed were the things that came closest to maybe addressing the issue, that I was able to locate. But since none worked, and as you pointed out, it is now clear they will only help towards viewing sent images rather than helping with inserting any images in the body of the email, which is the problem I suddenly started facing today.
Coming to your suggestion, on opening the Write window, the Insert choice on the menu bar is indeed available. And I had already tried using that, by clicking on the '''Insert ----> Image''' option listed. That opens
up the "Image Properties" box but using that has not resolved the matter either. It results in an image box getting inserted within the email but without the actual image itself.
Plus, normally I am able to use the '''Paste''' function in the Edit menu or through right-click, but today the (Cut/Copy/Paste) functions have gone inactive, thereby disallowing me to use that to place an image within the email. -
I have read through some of the message boards and still can't seem to find this issue anywhere. Please help.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
can anyone help me?
Not photos, just data synced with iCloud shown in Settings>iCloud. If you don't have sufficient storage to back up to iCloud, back up to your computer instead using iTunes (connect you phone to your computer, open iTunes, click on the name of your phone in iTunes, go to ths Summary tab of your iTunes sync settings and click Back Up Now). Also transfer your purchases to your iTunes library (connect your phone to your computer, open iTunes and go to File>Devices>Transfer Purchases). If you have photo stream photos older than 30 days tha you wan to save, save these to your camera roll before backing up (tap Select, tap the photos, tap the share icon -- box with upward facing arrow, then tap Save to Camera Roll).
When setting up your new phone, when given the option choose Restore from iTunes Backup and restore the backup you made earlier. -
Having loads of trouble installing itunes on my new samsung laptop keep getting this message when i try to run the download .
This installation package could not be opened verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid windows installer package please help i am close to brakinTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Do new Retina Macbook Pro's still have ghosting issues.
If I buy a 13.3 inch Macbook Pro Retina today will it have a ghosting issue, or has it been resolved?
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding.
The only way we would know if Apple has "fixes" is if they have publicly announced it on their website and Knowledge Base articles. -
I bought an Airport Express to extend my Airport Extreme about a month ago. It worked great until 2 weeks ago it started flashing amber. I reset it and set it up via airport utility and it would work for a little while, with great connection, and then it resumes the flashing amber light. Here is the error message:
"This AirPort base station was unable to extend the wireless network. Make sure the wireless network you're trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network."
The Airport Extreme is in working condition, in range, and entered in correctly. I do not understand how it can work great for a second and then stop.
Thanks!Power off both the AirPort Extreme and AirPort Express
Wait a few minutes
Power up the AirPort Extreme, and let it run a few minutes
Then, power up the AirPort Express
If you continue to have difficulty, ask Apple to replace the AirPort Express. -
Okay, I just downloaded IOS 6 on my iPad 2, and it deleted the youtube app that was already installed when I got the iPad, I downloaded the new app from the apple store and it doesn't fit my screen, this is ******* me off and I would like it back.
Here is the thing the actual license for Apple to have a native YouTube app has expired you must understand this more about Apple removing Google from its ecosystem and less about actual licenses. If Apple was so inclined I am almost certain they could have continued to provide a native YouTube app.
Do you really think that Apple Maps are "better" for iOS users? You know that you can set your default search to another provider such as Bing? Imagine Apple changing its default Safari search to Bing. You must understand that Google makes more from searches on iOS devices than it does on everyting that is Andriod (source:http://www.digitaltrends.com/mobile/google-earns-four-times-more-from-ios-than-a ndroid/). Apple is slowly and meticulously working on freeing iOS of Google products.
Of course it is a free market and Apple will most certainly allow Google's apps on their app store. -
After the latest FF update every page seems to freeze up and I get script error pop ups that cause the FF browser to hang forever. Only happened after updating FF and shockwave, I have had to disable shockwave flash which seems to fix the problem, but I can't watch videos. I had to add the NoScript addon just to see browser pages... not very good as it kills pretty much everything. Also I noticed that the newest version of java deployment kit has been rendered UNSAFE by FF. Why, and what to do about that issue also? Thanks.
The combination of a recent Windows update and the Flash player plugin's protected mode caused pages to hang for me with the eventual script error.
* You can disable protected mode following the steps in this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* My thread: [https://support.mozilla.org/en-US/questions/962798?esab=a&s=&r=0&as=s Flash hangs Firefox (eventually get script continue/stop dialog)]
Maybe you are looking for
-
I keep getting this messae when I try to share itune to my new mac The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
-
Running Logic in 64-bit but what about Snow Loepard?
Hi all, I am wondering what the benefit is of running Logic in 64-bit if you only run Snow Leopard in 32-bit. Is there better performance when you run both Logic and the OS in 64-bit?
-
Re: Using already running Tomcat server for development.
Hi Nick, Yes, you can use existing Tomcat Server for debugging app developed with NitroX. And you can refer to Help > Help Contents > NitroX User Guide > NitroX Tour > Running and debugging the application. We do support Tomcat 4.0.x to Tomcat 5.0.x.
-
Install Photoshop CS3 over CS/ver. 8?
Hi: I'm helping a friend try to install Photoshop CS3 as a stand alone -- not the suite. He's using OS X and has CS (the suite) already installed (Photoshop ver. 8). I'm helping him remotely using Logmein. I dragged the Photoshop folder to the trash
-
Which file decide EM to choose which db(10g) ?
I have 2 instances on same machine to be managed by em db console, which file decide EM to choose which db(10g)? from some document: you can also use DBCA after the installation to configure Database Control for a database. but I did not see this opt