HT4628 my itunes update is taking a long time, so far over 10hrs, is this normal?

I have just started to update itunes to the latest software version and it is taking a log time, 10 hrs or more so far. Is this normal.
The blue update bar is compleatly full as if the upload is complete but is still running package scripts. Can any one advise if this is normal and i should leave it, or could there be a problem?
thanks

no, that is not normal, quit and try downloading again, if that does not work, trash the Itunes application, not any of the libraries, just the application and try downloading again. With a dsl or faster it should only take less than hour depending on your type of connection

Similar Messages

  • Restore from backup of my iphone is taking a long time

    Restore from backup of my iphone is taking a long time, so far about 12 hours! Is this normal?
    I updated to ios5 and all seemed fine, later I realised that my music wasnt on the iphone, so pluged back into my computer and it said that the restore of the iphone had not completed successfully (or something along those lines). I went to restore from backup and selected restore from a back up of my iphone. All appeared to be going ok with the time remaining coming down to less that 10 seconds now for the past 11 hours it has been increasing and now the time remaining is about 17 minutes!
    Anyone know whats happening? Or what I should do? If anything, or should I just leave it restoring??
    Thanks for any help.

    A bit late, but I wonder if a Reset would be enough? Or even just turning it off and back on?
    Phil

  • I just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm

    i just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm, i also cant sighn in either it just keeps on saying accessing itunes....

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Update of latest ios taking a long time

    I have the first ipad and am doing the update to the latest ios version through a PC.  I am trying to install the download; however, it is taking a long time (more than an hour) and seems to be stuck on the backing up stage.  I'm afraid to stop it because it took me five times already just to download the update (over an hour long each) before I realized that I needed to turn off my antivirus to have it download successfully.  Now that it's stuck trying to do the actual update, do I try to stop it and start over or should I just let it run?  Is there something else I should be turning off to have this run more quickly or successfully?

    I finally decided to stop the install because it didn't appear to have any activity in the CPU.  After doing this, it had trouble stopping as well and I had to force a shut down of iTunes.  Then I had issues trying to rerun the install because it would tell me that it was having trouble starting a session for the backup.  To resolve this, I deleted all the backups in iTunes and had to restart my iPad.  After restarting, I was able to do a normal, manual backup of the iPad, so I then tried running the installation again and was successful.

  • What's in the apple TV update that came out tonight?  It's taking a long time to load.

    What's in the apple TV update that came out tonight?  It's taking a long time to load.

    Apple TV Software Update 5.2
    Feature
    Summary
    iTunes in the Cloud
    Browse and play your purchased iTunes music directly from iCloud. This feature may not be available in all countries.
    Bluetooth keyboard
    Use your Apple Wireless Keyboard to control your Apple TV. See this articlefor more information.
    AirPlay audio for videos
    Send stereo audio from movies, TV shows, and other videos on Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs).
    Stability and performance
    Includes general performance and stability improvements.
    If it's taking awhile to load it could be due to slow network speed or interference. It's around 600MB. If on ethernet, some have reported issues, try wifi.

  • I recently installed itunes update and can no longer connect to network nor internet

    I recently (sept 2013) installed itunes update and can no longer connect to a network nor internet wired /wireless. I know it is not the gateway as other devices work. Please help. I am not very knowledgable so exact instructions will be most helpful.

    Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
    Good luck!

  • Issue in updating large number of rows which is taking a long time

    Hi all,
    Am new to oracle forums. First I will explain my problems as below:
    1) I have a table of 350 columns for which i have two indexes. One is for primary key's id
    and the other is the composite id (combination of two functional ids)
    2) Through my application, the user can calculate some functional conditions and the result
    is updated in the same table.
    3) The table consists of all input, intermediate and output columns.
    4) The only way of calculation is done through update statements. The problem is, for one
    complete process, the total number of update statement hits the db is around 1000.
    5) From the two index, one indexed column is mandatory in all update where clause. So one
    will come at any case but the other is optional.
    6) Updating the table is taking a long time if the row count exceeds 1lakh.
    7) I will now explain the scenario:
    a. Say there is 5lakh 100 records in the table in which mandatory indexed column id 1 has
    100 records and id 2 has 5 lakhs record.
    b. If I process id 1, it is very fast and executed within 10seconds. But if I process id 2,
    then it is taking more than 4 minutes to update.
    Is there any way to increase the speed of the update statement. Am using oracle 10g.
    Please help me in this, Since I am a developer and dont have much knowledge in oracle.
    Thanks in advance.
    Regards,
    Sethu

    refer the link:
    http://hoopercharles.wordpress.com/2010/03/09/vsession_longops-wheres-my-sql-statement/

  • Why iPad2 is taking too long time for a software update?

    Hi, i have iPad2 with iOS 4.3, now I'd like to update to iOS 6.1.2, but it is taking too long time to update when i connect to iYunes.My internet speed is 15mbps.I am unable to understand the problem.Please help me

    Hi, i have iPad2 with iOS 4.3, now I'd like to update to iOS 6.1.2, but it is taking too long time to update when i connect to iYunes.My internet speed is 15mbps.I am unable to understand the problem.Please help me

  • I am trying to update my ipad mini but taking too long time 5 hours

    i am trying to update my ipad mini to ios 7  but taking too long time 5 hours so what i have to do
    Message was edited by: GOPAL DHRUW

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • Why are my apps taking a long time to update both on my phone and iPad?

    Why are my apps taking a long time to update both on my phone and iPad?

    Hi ariasm21,
    Thanks for visiting Apple Support Communities.
    If the App Store on your iPhone seems unresponsive or app updates are not completing, try the steps below.
    First force close the apps using these steps:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app's preview up to close it.
    These steps come from this article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Next, restart your device:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Try updating an app again. If the issues persist, you may want to troubleshoot your internet connection next:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    All the best,
    Jeremy

  • Attachments taking a long time to download

    Hi, I wonder if anyone is experiencing the same problem. I've just got my iphone 4 and have noticed that when I download an attachment in mail it seems to be taking a long time to download. This is compared to my old 3g which downloaded them ten times faster when connected to my wi-fi. (granted, before i updated it to 4.0)!! Does anyone have a fix for this? Safari is fast compared to my 3g.
    Regards, Andy

    Hey Rebecca 94!
    You may need to check for sources of Wi-Fi interference if you are on a wireless connection:
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    http://support.apple.com/kb/ht1365
    We also have another article that may help you make further sense of the situation:
    iTunes Store: Download times will vary
    http://support.apple.com/kb/ht1577
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Once my iBook updated it take a long time to downloaded it

    From iTunes store
    My free iBook has just 13 mo and it took more than 10 minutes to get it frome iBook store
    Is there a way to get it faster as it used to be before the update?

    There are a couple reasons it may be taking a long time to start:
    * Extensions may be slowing it down. Some, including antivirus toolbars, Browser Highlighter, and Skype extension are known to cause delays. See [[Troubleshooting extensions and themes]].
    * If you are getting delays where the status bar says "Waiting for site" or "Connecting to", make sure Firefox is fully allowed in all firewall software. See [[Firewalls]]

  • Time Machine Taking a Long Time to Index / Back Up

    Hi everyone.
    I noticed this on the latest backup to my Time Capsule device.  I'm backing up over a WiFi connection to a time capsule device.  It is taking a long time to index the backup.  Here's the code from the latest backup.
    10/17/12 9:43:03.799 PM com.apple.backupd: Starting standard backup
    10/17/12 9:43:04.091 PM com.apple.backupd: Attempting to mount network destination URL: afp://Michael%20Payne@Extreme%20Pleasantville._afpovertcp._tcp.local/Time%20Mac hine%20Backups
    10/17/12 9:43:12.657 PM com.apple.backupd: Mounted network destination at mountpoint: /Volumes/Time Machine Backups using URL: afp://Michael%20Payne@Extreme%20Pleasantville._afpovertcp._tcp.local/Time%20Mac hine%20Backups
    10/17/12 9:43:34.015 PM com.apple.backupd: QUICKCHECK ONLY; FILESYSTEM CLEAN
    10/17/12 9:43:37.440 PM com.apple.backupd: Disk image /Volumes/Time Machine Backups/Michael’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups 1
    10/17/12 9:43:37.459 PM com.apple.backupd: Backing up to: /Volumes/Time Machine Backups 1/Backups.backupdb
    10/17/12 9:45:23.296 PM com.apple.backupd: 500.1 MB required (including padding), 3.27 GB available
    10/17/12 9:46:48.844 PM com.apple.backupd: Copied 1436 files (3.4 MB) from volume Macintosh HD.
    10/17/12 9:46:51.897 PM com.apple.backupd: 448.1 MB required (including padding), 3.27 GB available
    10/17/12 9:46:51.898 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:47:53.681 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:48:55.642 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:49:56.511 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:50:56.564 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:51:57.643 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:52:57.903 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:53:59.341 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:55:01.281 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:56:03.171 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:57:03.966 PM com.apple.backupd: Waiting for index to be ready (100)
    10/17/12 9:58:33.083 PM com.apple.backupd: Copied 824 files (1.2 MB) from volume Macintosh HD.
    10/17/12 9:58:40.359 PM com.apple.backupd: Starting post-backup thinning
    10/17/12 9:59:51.851 PM com.apple.backupd: Deleted /Volumes/Time Machine Backups 1/Backups.backupdb/Michael’s MacBook Pro/2012-10-16-213620 (5.6 MB)
    10/17/12 10:00:17.440 PM com.apple.backupd: Deleted /Volumes/Time Machine Backups 1/Backups.backupdb/Michael’s MacBook Pro/2012-10-16-113505 (1.6 MB)
    10/17/12 10:00:30.046 PM com.apple.backupd: Deleted /Volumes/Time Machine Backups 1/Backups.backupdb/Michael’s MacBook Pro/2012-10-16-103509 (1.6 MB)
    10/17/12 10:00:43.781 PM com.apple.backupd: Deleted /Volumes/Time Machine Backups 1/Backups.backupdb/Michael’s MacBook Pro/2012-10-16-093513 (1.3 MB)
    10/17/12 10:00:43.781 PM com.apple.backupd: Post-back up thinning complete: 4 expired backups removed
    10/17/12 10:00:45.207 PM com.apple.backupd: Backup completed successfully.
    10/17/12 10:00:56.988 PM com.apple.backupd: Ejected Time Machine disk image.
    10/17/12 10:00:57.550 PM com.apple.backupd: Ejected Time Machine network volume.
    I am just curious as to why this is, and what I might do to fix it.  I did see one suggestion in another website suggesting diabling spolight indexing of the backup image with sudo mdutil -i off /Volumes/Time Machine Backups, but don't know where to type that in.  It then states to reenable it, but don't know where to type that in, either.  Any advice would be helpful.  I did run a verification not too long ago, and here's that code.
    10/14/12 3:44:14.289 PM com.apple.backupd: Backup verification requested by user.
    10/14/12 3:44:41.503 PM com.apple.backupd: Running backup verification
    10/14/12 4:04:31.602 PM com.apple.backupd: Backup verification passed!
    If any of you have or had a similar problem, I'd appreciate your help.  For the time being, I may just disable time machine during the evening, and only have it run during the day when I'm at work.

    Is your sig still current (10.7.3)? Or did you update to 10.7.5? Because 10.7.5 had a Spotlight/Time Machine bug that slowed down a lot of backups. If that's what it is, there's now a 10.7.5 Supplemental Update that fixes the slow Time Machine problem.
    If it isn't 10.7.5, I don't know what the problem might be.

  • My external library 100 GB on a 2TB drive is taking a long time to open.

    Hey there,
    I recently moved my library to an external drive.  When I tried to load the external drive, it said it needed to repair and I let it happen overnight because it was taking a long time.
    Now it seems to just freeze when I try to load the external library.  Can someone let me know if there is something I can do to make this process speed up?  Should I move some of my projects to another library and keep it off-line?
    Thanks,
    Austin

    Could it possibly be due to videos stored in the aperture library?  I think one of the folders has multiple GB of video...  Just a thought.
    If Aperture is freezing on opening, this can be caused by corrupted or incompatible media, but it would not explain the original error message your reported - "permissions".
    When the repair finishes, try to launch Aperture with the Shift-key held down. This will defer the generation of previews. If media cannot beprocessed, Aperture will hang, when it tries to generate the previews for those images or videos. If you can get Aperture to launch after deferring the preview generation, you could open the Activity window (Window > Show Activity) and then selectively try to generate previews for your last imported images and videos  (Photos > update preview). The Activity window will show, what is currently processed, and perhaps you can spot, which of the files is causing the hang.

  • Computer still taking a long time to boot

    I have a late 2013 21.5” iMac (Model: ME087LL/A) with a 1TB hard drive (5400 rpm).  I just switch from Windows to Mac, so I tried to keep everything as simple as possible on the transfer of files.  I had only added Kaspersky Antivirus and Western Digital Tools. 
    Boot times and operation seemed normal so I transferred my music, pictures, and some files.  My computer started running slow with just one user and started taking a long time to boot.  I found that since I added about 24,000 pictures to iPhoto, the Mac was trying to send all these pictures to iCloud in the background.  I stopped using iCloud for iPhoto and that seemed to speed up the normal operation once the computer is booted. 
    The computer still seemed to take a very long time to boot.  It would now take 3 minutes to get from turning it on to being able to use Safari.  I uninstalled Kaspersky Antivirus and Western Digital Tools using each company’s uninstallers so I know they are completely off the computer. 
    Any ideas on how to get back to the fast boot time?  I am only using about 150 GBs of the 1 T drive so I don’t think that is causing the issue.  What should I expect for a boot time on a brand new Late 2013 iMac?  Or should I try to re-install Maverick and try to get a fresh start?
    Any advice would be appreciated so I don’t feel like I made the wrong choice going to Mac.  I'm kicking myself because the computer was so fast when I just got it.

    Seventy one thanks for trying to help me out.  I really appreciate it.  Log is below.  You are absolutely right. Kaspersky and WD look like they still have something (as well as google??).  Is there anything else that stands out?  How would I go about getting rid of them?  Re-Install?  Clean Re-Install?
    EtreCheck version: 1.9.12 (48)
    Report generated June 16, 2014 at 6:19:51 PM EDT
    Hardware Information:
              iMac (21.5-inch, Late 2013) (Verified)
              iMac - model: iMac14,3
              1 2.9 GHz Intel Core i5 CPU: 4 cores
              8 GB RAM
    Video Information:
              NVIDIA GeForce GT 750M - VRAM: 1024 MB
                        iMac 1920 x 1080
    System Software:
              OS X 10.9.3 (13D65) - Uptime: 0 days 0:8:41
    Disk Information:
              APPLE HDD HTS541010A9E662 disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (847.45 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Gatekeeper:
              Mac App Store and identified developers
    Kernel Extensions:
              [loaded] com.kaspersky.kext.klif (3.0.3a40) Support
              [loaded] com.kaspersky.nke (1.6.3a13) Support
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.microsoft.office.licensing.helper.plist Support
              [loaded] com.westerndigital.ErasePrivilegedHelper.plist Support
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist Support
    User Login Items:
              None
    Internet Plug-ins:
              SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
              FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
              Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  Support
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 930.71 GB Disk used: 141.47 GB
              Destinations:
                        Mac Backup [Local] (Last used)
                        Total size: 2 
                        Total number of backups: 5
                        Oldest backup: 2014-06-08 00:03:53 +0000
                        Last backup: 2014-06-16 03:07:06 +0000
                        Size of backup disk: Adequate
                                  Backup size 2  > (Disk used 141.47 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   2%          WindowServer
                   1%          fontd
                   0%          hidd
                   0%          dpd
    Top Processes by Memory:
              98 MB          Finder
              74 MB          WindowServer
              66 MB          ocspd
              66 MB          mds_stores
              66 MB          Dock
    Virtual Memory Information:
              5.37 GB          Free RAM
              1.69 GB          Active RAM
              233 MB          Inactive RAM
              731 MB          Wired RAM
              233 MB          Page-ins
              0 B          Page-outs

Maybe you are looking for

  • My Iphone 6 getting off after fully charge I am charging all night but morning phone is off anybody can help

    I phone 6 getting switch off after fully charge at night and one more problem in my home wifi is working good but in office wifi connection is keeping disconnect any body please help this is hardware problem or ios problem

  • Third Party Chatting Software

    Does anyone know if third party chatting software like jivetalk count towards the number of texts u have or solely as data b/c my plan only has 200 texts. If it counts only as data that would be great!

  • Reading class component

    Hi, I am trying to interpret Class component and i got a stragne hex value in the file: you can see the complete content as below: 06 01 5A 00 0A 03 44 40 03 33 30 06 68 20 A2 A3 80 00 81 02 81 00 0A 69 6E 74 65 72 66 61 63 65 32 A4 00 0C 80 00 81 02

  • Cannot install Oracle Linux on HP DC 7700 series PCs

    Hi, Im trying to install Oracle Linux on DC 7700 series and installation got hang up at the point where the "PCI Probing starts" Please do provide a remady for this ! Nuwan

  • CRM 5.1

    Hi Does anyone have CRM5.1 docs.. if so please mail me a copy. I heard these are not copyright material so please share it with me. my mail id is [email protected] Thanks, Lobo