HT4628 My MacBook Pro does not automatically reconnect to Wi-Fi after sleep

I have to manually Open Network Preferences and choose my home airport (or office network) every time that I wake up from sleep. I would like to have it automatically choose the network. Is there any way to fix this?

Not I solution, but I am hoping a similar issue to provide more insight. I am seeing your auto-connect issue, but I only seeing the issue on the first network listed in the preferred networks. I recently switched the order of of my preferred networks, and the auto-connect failure was immediately switched to the "new" first network.
To elaborate, I have never had issues with my home network. However, a few days ago I switched my home network to the top of my preferred networks list. Now I must always select my home network to connect. Also, I was always having problems with my parent's network, which was first in the preferred networks list. Now that it is second, I have no problems connecting to their network automatically, when waking from sleep or from a clean boot.
I am still searching for other similar reports of this issue.

Similar Messages

HT4628 My macbook pro will not automatically reconnect to the wifi after a sleep. This has started after having upgraded to mountain Lion (10.8).

Hi
After I have installed Mountain Lion (10.8) - my macbook pro will not connect automatically to my preferred wifi network. It used to do that on the previous versions. It seems that the mac does not recognize the preferred network, as it asks me to choose a network after evey sleep/restart. I have modified the network preference to have my preferred netwrok at the top of the list. I have tried with/without checking the "ask me before joining a new network". It still behaved the same.
Thanks
Eitan

Try making a new network connection and renewing the DCHP lease as detailed here:
fix-os-x-mountain-lion-wireless-connection-problems

System does not automatically reconnect to wifi network after sleep/restart

My iMac G4 (2GB RAM, 10.5.1, AirPort Extreme) does not automatically reconnect to my wife network after waking from sleep or restart. I just recently switched the iMac from a wired to wireless set-up though the machine has always had the AirPort card. In wired mode, it always automatically found the network.
Network preferences have the "Ask to join new networks" checkbox selected. Below the checkbox it reads "Known networks will be joined automatically."
My wireless router is Linksys WRT150N, security type is PSK and encryption method is AES key.
Anyone have any suggestions?
Thanks!
bk

I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

MacBook Pro does not start up. Shuts down after apple logo screen with a loading bar.

I booted my macbook pro up today and i noticed it took a while to do so. i also noticed that the fans were going fast and the macbook was getting hot during the start up process. When i went to the screen i also noticed a loading bar which i havent noticed before when starting up the mac. Once the loading bar has reached the end, the macbook just turns off and the same thing happens over and over. I am on mountain lion

I went to apple today and they told me that the hard drive has unmounted itself. They have my macbook right now and they said they're going to replace the wire that connects the hard drive to the logic board and see if this solves the issue. If it doesn't work they will replace the existing 250GB hard drive in my macbook with a 500GB as they no longer make that size hard drives (cost of £130 for the replacement). The problem is that i dont have my macbook backed up so will there be anyway to get data off the od hard drive?

My MacBook Pro does not appear to have power.

I have a 13" MacBook Pro, Mac OS X (10.6.3) that will not turn on regardless of what I do. With the MagSafe Power Adapter connected, its indicator light is green. When I press the battery indicator button, it indicates the battery is fully charged. The sleep light does not blink. After disconnecting the MagSafe Power Adapter, when I press the battery indicator button, it indicates the battery has no life (the first light doesn't even blink).
The electrical power outlet has power. When I use a new second MagSafe Adapter, my MacBook has the same symptoms and won't turn on.
My MacBook Pro does not have a user removal battery. I've tried all the recommended resets.
Any thoughts would be greatly appreciated.

10.6.3 is pretty old for this machine but shouldn't create this problem.
So you did this:
Reset SMC
http://support.apple.com/en-us/HT201295
If no joy then:
Try a hard reset. Disconnect the battery (take the bottom off and unplug, use your fingernail.) and power adapter. Press the power button for 1 minute. Let the computer sit for 5 minutes, Reconnect and try to start up.
No? - Go through the same procedure and try to start without the battery connected.
The addendum to this would be to try a known good battery.

HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

My MacBook Pro does not recognize my Android Incredible 2 cell phone and I can not transfer my photos from my cell phoen to my Mac. I was able to do this in the past, but can no longer do so. i havenot upgraded to any new software.

My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?

I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not. It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue. I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that. I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software. On a side note this is why I will always be an apple user, Iphones and the like never have this problem

MacBook pro does not recognize my WD external hard drive anymore

I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

Does the WD drive show in Disk Utility?
Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

Go to Finder > Preferences then select the General tab
Make sure External disks is selected.

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numb

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numbers from the set I received?

yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Adobe Lightroom on MacBook Pro does not see my iphoto library

Adobe Lightroom on MacBook Pro does not see my "iphoto library"

Hello.
The problem is that the iPhoto library is inside of iPhoto. Lightroom won't let you select it because it's basically a shortcut to iPhoto. Try exporting the images you need or all of them, depending on what you need.

HT1338 Why macbook pro does not read SanDisk SD ram?

Why macbook pro does not read SanDisk SD ram?
I really have problem with that.

http://support.apple.com/kb/HT3553

How do I transfer an iMovie to a dvd if my macbook pro does not have idvd?

How do I transfer an IMovie to a DVD if my macbook pro does not have IDVD?

Purchase an external DVD drive or buy the Apple USB SuperDrive.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy

HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

HT4628 My MacBook Pro does not automatically reconnect to Wi-Fi after sleep

Similar Messages

Maybe you are looking for