HT4628 The time machine has stopped working and I get this message about every 20 minutes while I am work. This backup is too large for the backup disk. The backup requires 104.9 MB but only 38.4 MB are available.
Has any found a resolution for this problem?
wittsjk wrote:
Can I use this external drive with another one? Or do I get rid of this one and just purchase one that is twice as big as the internal drive?
I would reccommend buying another one. You need your Time Machine backups in one folder. You can always use the older one for backing up media etc,
Cheers
Pete
Similar Messages
-
I have made numerous attempt to download the ios6 on my iPad 3 and it starts but then stops and gives me an error message. Someone suggested that it could be done on my main computer in iTunes but that has to be updated and I don't know how to tell if mine has been updated or not. How do I get this installed? Anyone please help?
sunshinecowgill wrote:
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not.
You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized. -
My Time Machine has stopped working and now errors out everytime I try to re-connect ?
What is the error.. ??
We cannot help much without details.
Look at the pondini troubleshooting.
http://pondini.org/TM/Troubleshooting.html
The vast majority of issues are C12 or C17.. especially with ML.. which rather than fixing issues left over from Lion exacerbated them. -
My Time machine has stopped backing up saying there are some read only files.
My Time machine has stopped backing up and says that ther are some read only files preventing this. What steps do I need to take to fix it?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context. -
My Mac has not been backing up for some time. Tried Apple Support, but couldn't figure out problem.
Receive the following error...
Time Machine Error
This backup is too large for the backup disk. The backup requires 289.28 GB but only 177.03 GB are available.See #C4 in Time Machine - Troubleshooting.
If that doesn't clarify the situation, post back with:
How much data is on your internal HD (and any others being backed-up)?
How large is your Time Capsule?
Is there anything else on the TC besides these backups? If so, what and how large? -
For over two weeks now I have been frustated and not having my TIme Machine back up to my 1tb external drive. I dont understand why now its a problem. It keeps saying
"This backup is too large for the backup disk. The backup requires 345.74GB but only 289.80GB are avialable. Time Machine needs work space on the bakup disk, in addition to the space required to store backups. Open Time Machine preferences to select a large backup disk or make the bakup smaller by excluding files." So I have already excluded almost all of my files, and even deleted the backup disk yet, that quote still keeps popping up. I am truly at a wall with this. I have a Mac OS X version 10.7.5. CAN SOMEONE HELP ME PLEASE????If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
I have a problem with my Time Capsule. The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available. As a result, my backups are no longer running. My umderstanding was that the Time Capsule would automatically delete old backups to make space. Can anyone help me figure out how to get my backups to run again?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
Since having my MacBook Pro repaired (for a video problem) Time Capsule returns the following message: "This backup is too large for the backup disk. The backup requires 428.08 GB but only 192.14 GB are available."
I notice that there is also a new sparse bundle.
Since TC has my ONLY backup (going back about 4 years) I am reluctant to wipe it and start over fresh as I am afraid of losing files.
Is there a way of dealing with this?
I am using Snow Leopard 10.6.8The repair shop likely replaced a major circuit board on your MacBook Pro, so Time Machine thinks that you have a "new" computer and it wants to make a new complete backup of your Mac.
You are going to have to make a decision to either add another new Time Capsule....or USB drive to your existing Time Capsule....and in effect start over with a new backup of your Mac and then move forward again.
For "most" users, I think this is probably the best plan because you preserve all your old backups in case you need them at some point, and you start over again with a new Time Capsule so you have plenty of room for years of new backups.
Or, as you have mentioned, you have the option of erasing the Time Capsule drive and starting all over again. The upside is that you start over and have plenty of room for new backups. The downside is that you lose years of backups.
Another option....trying to manually delete old backups individually....is tricky business....and very time consuming. To get an idea of what is involved here, study this FAQ by Pondini, our resident Time Capsule and Time Machine expert on the Community Support area. In particular, study the pink box.
http://web.me.com/pondini/Time_Machine/12.html
Once you look through this, I think you may agree that this type of surgery is not for the faint of heart. I would suggest that you consider this only if one of the other options just cannot work for you. -
Time Machine has stopped making backups
Time Machine has worked fine for me fore many months, the backup disk being a 1 TB external firewire drive.
But now Time Machine will not make a backup. I keep getting the same error message: "Time Machine Error. This backup is too large for the backup volume. The backup requires 88.7 GB but only 58.5 are available."
I thought Time Machine just deleted the oldest files on the drive to make the room it needs for continued backups. So why isn't it doing that now? How do I get it to go back to doing that?
Thanks for any help!
TomTom Baker1 wrote:
My Time Machine backup disk is an external 1 TB firewire drive with only one partition, dedicated entirely to TM, and it backs up the two internal drives in my G5. One of these two internal drives has about 600 GB of data on it and the other about 400, so together they would be enough to fill the external Time Machine backup drive.
Yes, that's too small. Our "rule of thumb" is, TM needs 2-3 times the space of the data it's backing up. See #1 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
Now I have discovered that there is something wrong with the Time Machine backups as well. I decided to go into TM to see just how far back in time the backups go, but it will only allow me to go back as far as yesterday. It acts as though there are no backups older than yesterday afternoon.
That's probably correct; your TM disk is too small, and there's just not room for more. Here's the situation: A full backup has nearly filled the disk; something fairly large has been added or changed, and there just isn't room for it, in addition to the full backup.
The 88.7 GB it's requesting means it's trying to back up about 74 GB (it adds 20% for workspace, etc., on the TM disk).
This is getting stranger all the time. At this point should I just give up trying to fix the situation, erase the backup drive, and start all over again?
That probably won't help much, if at all. To confirm what's going on, Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the last backup attempt, then copy and post all the messages for that run here.
You need to do one of the following:
Get a larger drive, at least 2 TB.
Get an additional drive; use one for TM backups of one of your internal HDs, the other for a different app to back-up the other internal HD.
Exclude a lot of stuff from Time Machine (at least 300 GB).
Use a different app, such as CarbonCopyCloner or SuperDuper, to back up your internals to separate partitions on the 1 TB drive. These will be exact copies only; no previous copies of things you've changed or deleted. -
I am getting the error ¨This backup is too large for the backup disk. The backup requires 1.42 TB but only 998.49 GB are available¨ when I try to do a time machine backup. I have a Retina Macbook Pro and am only using 250 GB on the internal drive. My 1TB external drive that I am trying to use has been complete reformated (case sensitive journaled) and therefore completely empty. Any ideas why time machine is saying my drive has 1.14 TB when its capacity is no where near that?
Well, at this point I might recommend that you reboot your MacBook Pro while simultaneously holding down the Command - R keys and booting into the Lion Recovery Partition. There I would enter the "Disk Uility", highlight your Mac HD in the left hand column to select it and run "Repair Disk", and then run "Repair Permissions" twice. They may resolve the hard drive's confusion in Time Machine.
Hope this helps -
Please let me know what I can do to get my Numbers (iWork 09) working properly again.
Here is what is going on:
Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers. I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
The document "Blank.nmbtemplate" is invalid. The index.xml file is missing.
I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists. Since then Numbers is not working right.
I'm sure it's something simple to fix, but I've tried re installing it and that didn't work. Appreciate any help.
Thanks
AppMareThere is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?
-
CAn anyone make some suggestions regarding this message. 'This backup is too large for the backup disk. The backup requires 1.38 TB but only 327.08 GB are available.'
See #C4 in this terrific document provided by expert Pondini.
http://web.me.com/pondini/Time_Machine/Troubleshooting.html -
Time Machine Error - The backup is too large for the backup disk
I have been using Lion (currently 10.7.1) on my MacBook Pro (13" - early 2011) since it was released. I haven't had any serious problems with it.
All of a sudden, I am getting an error in Time Machine. When it tries to run a backup, the error "This backup is too large for the backup disk. The backup requires 7.51 GB but only 630.1 GB are available." What gives? That's plenty of room. I have installed Logic Studio and a few plug-ins, so the 7.51 GB is probably right. The free space is correct as well. I can't understand what the problem is.
The backup disk is an external USB 2.0 drive with no other Time Machine backups on it or any other files. The folder "Backups.backupdb" is the only thing on the root of the disk.
I am reluctant to reset the Time Machine and lose all of the backups, but I will if anyone recommends it.Hi Linc,
It is not working at the moment, as I have restored the original Lion image again; it has all my work and apps on it.
Many thanks for the info on the log, though. It tells a strange story. Here's the log from the last backup that worked to the first one that failed: --
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: Starting standard backup
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: Backing up to: /Volumes/Backup/Backups.backupdb
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: 100.0 MB required (including padding), 633.72 GB available
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: Waiting for index to be ready (100)
Sep 12 17:16:00 Johns-MacBook-Pro com.apple.backupd[674]: Copied 793 files (601 KB) from volume System.
Sep 12 17:16:00 Johns-MacBook-Pro com.apple.backupd[674]: 100.0 MB required (including padding), 633.72 GB available
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Copied 89 files (93 bytes) from volume System.
Sep 12 17:16:01 Johns-MacBook-Pro mds[34]: (Error) Volume: Could not find requested backup type:2 for volume
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Starting post-backup thinning
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Deleted /Volumes/Backup/Backups.backupdb/John’s MacBook Pro/2011-09-11-154229 (1.1 MB)
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Post-back up thinning complete: 1 expired backups removed
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Backup completed successfully.
Sep 13 10:34:12 Johns-MacBook-Pro com.apple.backupd[287]: Starting standard backup
Sep 13 10:34:12 Johns-MacBook-Pro com.apple.backupd[287]: Backing up to: /Volumes/Backup/Backups.backupdb
Sep 13 10:34:52 Johns-MacBook-Pro com.apple.backupd[287]: 7.51 GB required (including padding), 630.11 GB available
Sep 13 10:34:52 Johns-MacBook-Pro com.apple.backupd[287]: No expired backups exist - deleting oldest backups to make room
Sep 13 10:34:52 Johns-MacBook-Pro mds[32]: (Error) Volume: Could not find requested backup type:2 for volume
Sep 13 10:35:03 Johns-MacBook-Pro com.apple.backupd[287]: Backup failed with error: Not enough available disk space on the target volume.
I don't understand. For starters, I think it's a little wasteful that 3.5 GB has been used to back up 601 KB. That's the difference in free space on the backup volume between the two backups. That can't be normal, surely.
The only error is that mds[32] error, and from what I've read on forums, that seems to appear on backups that work perfectly.
Too weird. It looks like I'll have to reinstall Lion and all my applications again to get Time Machine working, or find another backup solution. -
Time Machine backs up one MacBook, but "backup is too large" for second
We have two MacBooks running OS 10.5.8 and both are connected wirelessly to Time Capsule. My daughter's laptop backs up fine. But my wife's laptop fails. It backed up one time when I first installed it, but never since. The error message I get is that the backup is too large for the backup volume -- 71.8 GB required but only 7.4 GB available.
My daughter's machine has a lot of photos and iTunes files on it, so it shows 141 out of 150 GBs are used up. The Time Capsule, which I understood to have 1 TB actually shows only 7.4 GB out of 463 GB are available.
And actually, when I try to manually run Time Machine on my wife's machine I get the really long Preparing message, and then the Time Machine Error message about not enough volume.
Should a machine with 150 GB capacity really be taking so much space on Time Capsule, and why the difference between the 1 TB advertised capacity and the <500GB of memory that actually appears to be there?
Does any of this suggest I need to restore the external or internal drives?Steve Hasler wrote:
We have two MacBooks running OS 10.5.8 and both are connected wirelessly to Time Capsule. My daughter's laptop backs up fine. But my wife's laptop fails. It backed up one time when I first installed it, but never since. The error message I get is that the backup is too large for the backup volume -- 71.8 GB required but only 7.4 GB available.
Does it make sense that it's trying to back up about 60 GB (Time Machine adds 20% for temporary workspace) from that Mac?
If so, see if it has the +Warn when old backups are deleted+ box checked in Time Machine Preferences > Options.
Click the Time Capsule in a Finder sidebar. If the Finder is in +Column View,+ you should see something like this:
|
except there should be two +sparse bundles+ listed in the third column. Right-click each one in turn, select +Get Info,+ and see what's shown for Size. Report back with the numbers. Also tell us if you have any other data on your TC, besides the 2 Mac's backups.
My daughter's machine has a lot of photos and iTunes files on it, so it shows 141 out of 150 GBs are used up. The Time Capsule, which I understood to have 1 TB actually shows only 7.4 GB out of 463 GB are available.
And actually, when I try to manually run Time Machine on my wife's machine I get the really long Preparing message, and then the Time Machine Error message about not enough volume.
That sounds like it's doing a "deep traversal," perhaps after a long time since the last backup, where it has to compare everything on the Mac to the backups, to figure out what needs to be backed-up.
Should a machine with 150 GB capacity really be taking so much space on Time Capsule
Sure. Time Machine will use up all the space available to it, then begin deleting the oldest backup(s) when it needs room for new ones.
and why the difference between the 1 TB advertised capacity and the <500GB of memory that actually appears to be there?</div>
It does sound like you have a 500 GB Time Capsule. The original ones were 500 GB; I'm not sure when the 1 TB version came out, and now you can get them with 2 TB. How old is it, and why do you think it's a 1 TB model? -
Time Machine Error This backup is too large for the backup disk
Hi, I have a 1TB Time Capsule which backs up my Mac. I was having some issues with my mac so I decided to perform an erase and install and then use Migration Assistant to transfer everything back to my Mac.
After I reinstalled Snow Leopard and restored my Mac using Migration Assistant, Time Machine says that the backup has failed. It says " Time Machine Error This backup is too large for the backup disk. The Backup requires 663 GB but only 255 GB are available.
What do I do? Is my only option to erase my Time Capsule and have it back everything up from scratch?Hi, thanks for the help. I erased everything off of the Time Capsule and it's backing up my Mac from scratch. It's almost finished backing up my whole mac. It's now at 641.86gb of 646.54gb but it's now backing up very slowly. It's backing up .1 every few minutes. Is this normal?
Here's the log from Time Machine Buddy:
Starting standard backup
Attempting to mount network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Mounted network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Creating disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
Detected system migration from: /Volumes/My Book
Backup content size: 850.0 GB excluded items size: 606.5 GB for volume Stuart's Drive
Backup content size: 425.9 GB excluded items size: 67.3 GB for volume Macintosh HD
No pre-backup thinning needed: 722.56 GB requested (including padding), 928.68 GB available
Waiting for index to be ready (101)
Copied 28.3 GB of 602.1 GB, 29340 of 1478089 items
Copied 55.0 GB of 602.1 GB, 41596 of 1478089 items
Copied 82.9 GB of 602.1 GB, 55899 of 1478089 items
Copied 110.7 GB of 602.1 GB, 63347 of 1478089 items
Copied 138.8 GB of 602.1 GB, 83831 of 1478089 items
Copied 166.8 GB of 602.1 GB, 94574 of 1478089 items
Copied 194.7 GB of 602.1 GB, 102854 of 1478089 items
Copied 222.8 GB of 602.1 GB, 114388 of 1478089 items
Copied 129159 files (242.5 GB) from volume Stuart's Drive.
Copied 248.4 GB of 602.1 GB, 130414 of 1478089 items
Copied 265.5 GB of 602.1 GB, 355699 of 1478089 items
Copied 293.6 GB of 602.1 GB, 382912 of 1478089 items
Copied 322.1 GB of 602.1 GB, 387974 of 1478089 items
Copied 349.8 GB of 602.1 GB, 399204 of 1478089 items
Copied 378.3 GB of 602.1 GB, 399358 of 1478089 items
Copied 406.9 GB of 602.1 GB, 399441 of 1478089 items
Copied 434.5 GB of 602.1 GB, 415817 of 1478089 items
Copied 461.5 GB of 602.1 GB, 471528 of 1478089 items
Copied 488.2 GB of 602.1 GB, 537277 of 1478089 items
Copied 515.1 GB of 602.1 GB, 580446 of 1478089 items
Copied 541.3 GB of 602.1 GB, 590386 of 1478089 items
Copied 566.8 GB of 602.1 GB, 602496 of 1478089 items
Copied 593.3 GB of 602.1 GB, 649575 of 1
Message was edited by: Stuart Lawrence
Message was edited by: Stuart Lawrence
Maybe you are looking for
-
I followed the steps to restore to factory settings now I can't get back my info from a prior backup. My pads screen was frozen on the connect to iTunes I needed to restore. I had to setup my pad as if it was new. How do I acess my prior backup
-
TS4532 Bluetooth problem with iOS 6.1 - Help!
Since I updated to iOS 6.1 I can't Sync any of my bluetooth earpieces, Jawbone and Ant. Both worked fine until upgrade. Any suggestions? Thanks
-
I uploaded a AI CS5 file into a Cloud Folder with Plug-ins. But its empty in Adobe Ideas.
I uploaded an AI CS5 file into a Cloud Folder with Plug-ins. But its empty in Adobe Ideas. I'd like to work on it with the touch version. Any ideas?
-
Can you create an iWeb domain from an iWeb sight?
What happens if the computer you are using to create the iWeb crashes? Your iWeb page is still out there but the domain in Application Support/iWeb is now gone. Can I recreate that from the original site? I feel kind of dumb creating a whole new site
-
Domain Join between Client Network and RODC Netzwork
Hi there i have the following Network Setup (all Servers are 2008 R2 with SP) If i try to Join the DB Server to our Domain via offline Join(DJOIN) everything is working fine. But if i try to join the Clients to our Domain, the login fails with the me