HT4641 Trying to use the Pages WebDVA just. Put in info and try to connect and get "error message and try again". Is there a fix?

Trying to get a file from Dropbox for Pages on my iPad. Used the Pages webDVA but it gives a error and to please try again. Can i use this feature or is it another useless feature of Pages?

Dropbox doesn't support webdav. Do a google search on "dropbox webdav" to find out what you have to do.

Similar Messages

I am running a laptop with windows 7 on it and trying to use the save as feature in Photoshop CS6 and won't let me save as anything. Please help?

I am running a laptop with windows 7 and am trying to use the save as feature in Photoshop CS6 and it wont let me save as anything. Can someone please help me with this?

A screenshot of your Photoshop work area showing the open file you want to save as, the Layers panel open, and the Save as... dialog open might give us a clue as to what is going on.
To take a screenshot and save it as a file
For Windows 7, Printscreen, open a New File in Photoshop, Ctrl v to paste, then save as jpeg (the other trick was for windows 8)
Use the Camera icon on your reply to upload it.
Also File > Save for Web is a good workaround if you just need a jpeg, png, or gif.
Gene

I am trying to install the Captivate 8 trial but when I go to save it I get a message saying "Insufficient disk space...

I am trying to install the Captivate 8 trial but when I go to save it I get a message saying "Insufficient disk space, please check the minimum requirements and free up disk space to try again." But I have more than enough disk space! How do I fix this?

Hello,
Welcome to Adobe Forums.
Please share your contact information on [email protected]
Thanks,
Vikram Gaur
Adobe Support

I am trying to use the "This solved my question - 10 points" and the "This helped me - 5 points" but they are NOT doing anything. How do I award the points ?

I am trying to use the "This solved my question - 10 points" an the "This helped me - 5 points" but they are NOT doing anything. How do I award the points ?

Are you talking about the "Legend" panel at the right of the window?
Those text are just help texts explaining the reputation points. You can only award points, if you are the original poster of a question. Then you will see active buttons to award points below the answers you receive. See here for more information: https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards
Léonie

Trying to use the plug in to switch from iPhoto to lightroom but all I get is a window that says "checking iPhoto library" Whats happening?

rying to use the plug in to switch from iPhoto to lightroom

1. Back up your Library now. You don't use iPhoto to back it up, you can do it simply by dragging the iPhoto Library from the Pictures Folder to the External Disk
2.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Error message when loading "The connection to the server was reset while the page was loading" I have to hit "try again and then it connects.

I get the following message when trying to connect to firefox:
"The connection to the server was reset while the page was loading." I have to click on "try again" and then it connects.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Trying to down load but get error message.... "there is a problem with the Windows Installer Package" Does anyone know how I fix this??

"there is a problem with the Windows Installer Package" Does anyone know how I fix this??
My itunes ends up being so out of date becuase I can never upgrade it.
I have a sports kit and want to make sure I am using the most uptodate version
I managed to delete the old version, just in case it was the fact it was about 10 versions out of date that was the problem but now I can't reinstall it at all......
Please help

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

Mac os x 10.7.5 - pixma mg3220 - connected usb gets error message " the printer is not connected"

hi, I'm a newbie wrt to mac printer operation.
1.I installed a mg3220 using the wps button on my smc barricade router and can print wireless with a windows 7 printer.
2. my wife has a mac. The printer is on and connected direcly with the usb cable.
she gets the error message " the printer is not connected".
how can we override this error message and print via USB?
thanks and regards.
jmpaq

Hi, I have 10.6.8 and an HP printer so it may be slightly different but I'll give it my best shot:
Go to System Preferences.
Click on "Print & Fax"
Near the top of that page you should see "Print" and "Scan" options. Click "Scan"
A button appears that says "open scanner"
The settings are different between the different scanner models so I'm not sure what the next window will look like, but it should be pretty straightforward from there. It will scan to a JPEG image which you can attach to an email. I hope that helps! Let me know if there's anything ense I can help with.

HT201328 After restore the phone, I can't active it anymore. When connect to iTune error message "There is no SIM card installed in the iPhone you are attempting to activate."

I've a request to unlock my phone to Telstra and recive info for unlocked.
After that I restore the phone following the instruction: http://support.apple.com/kb/HT5014.
I can't active my iPhone anymore. When connect to iTune, I got error message "There is no SIM card installed in the iPhone you are attempting to activate." even my SIM is working well

Read here:
http://support.apple.com/kb/ts4148

I'm trying to use import com.adobe.crypto.* on Windows version of my App but get error 1172:Definition com.adobe.crypto could not be found

The Mac version of my Air app works fine, so does the iPad version, but the PC version has been a bit of a nightmare.
I keep getting the error "1172:Definition com.adobe.crypto could not be found", when I publish it.
Basically the 'com' folder is in the same directory as the app I am publishing and within that is 'adobe' and within that is 'crypto' within that is a series of .as files.
I've added C:\Users\Gary\Documents\My_Applications\My_App_folder\com\adobe\crypto to source path list (I have no idea if that's right).
But that just gives me a different error 5001: The name of package com.adobe.crypto does not reflect the location of this file. Please change the package definitions name inside the file.......
I didn't have to include this source in the Mac version... but someone seemed to suggest it on a forum.
I'm basically stabbing in the dark at the mount, something I seem to be doing a lot of these days. :-(
Any help would be greatly appreciated.
Many Thanks
Gary

I've figured it out
Turns out I needed to add a source path (in the Actionscript 3 settings click on the Source File Tab) that exactly matches the directory the app and com folder is inside of. I wrongly assumed that Adobe Air could figure out where it was for itself, but no.... it needs to be told where to look for the com folder even though it's staring it right in its face. (Don't set the path to the 'com' folder itself, but to the enclosing folder that the .fla and the com is in).
The Mac version doesn't seem to need that, it just finds the com folder if it's inside the same folder.
Now I've got another massive error:-
When I test the app, it works fine sending to Air for Desktop, however when I publish with embedded runtime for Windows.... It comes up with this error.
Any ideas ?

HT4644 I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes I've tried installing the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my

I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes. I've tried installing all the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my system. Can anyone tell me why I can't install the updates?

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device

I downloaded pages from the app store and I can use it on my Mac login but it doesn't show up when my wife logs in to her account? Were using the same computer, just different logins.

I downloaded pages from the app store and I can use it on my Mac login but it doesn't show up when my wife logs in to her account? Were using the same computer, just different logins.

No. You need to buy it for your Apple ID and for the other. You will have problems with updates

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

HT4796 I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

Send it as a PDF.

HT4641 Trying to use the Pages WebDVA just. Put in info and try to connect and get "error message and try again". Is there a fix?

Similar Messages

Maybe you are looking for