HT4664 Final CUT PRO X

Hello everybody,
I have one question about the Final Cut Pro X.
Could it be possible to run this application without problems by using an iMac which has the following specs:
CPU Intel i7, 2.8 Ghz'
RAM DDR-3 1067 Mhz
Graphics ATI HD 4850
2 HDisks 1Tb each
In ordrer to have better results should it be installed any kind of HW?
Many thanks
Regards
Joseph Acharnes Greece

Welcome to the Apple Support Communities
Your computer supports Final Cut Pro without problems. Open  > About this Mac and see Memory. I recommend 8 GB of RAM if you want to install Final Cut Pro

Similar Messages

HT4664 Can I use final cut pro X on " Mac mini" ?

Can I use final cut pro X on " Mac mini" ?

depending on what model: for sure yes, it does!
I did use FCPX on an old MacMini, c2d, 2.26GHz with 8GB Ram (using proxies made editing easy).
My actual work-horse is a MacMini i5, late 2012, 16GB Ram, plus some ext. usb3 drives = perfect for my needs! (costs vs. power)
I'm using two cheap 2.5" Toshiba 1TB usb3-drives, combined with MacOS' built-in DiskUtility as a Raid0 = 150mbps for under 100€ ... not professional (=raid0 contains a small risk of data loss), but again: best €-vs.-HP ratio

HT4664 i have final cut pro 7.03

Do I need to purchase the full $299 final cut X, or is there an upgrade to X at no cost or cheaper cost. I already use 7.03.
Let me know.
Thanks,
D

No upgrade path from FCP 7.0.3.
FCP-X is a completely new application - it only shares the FCP name.
You can download a 30 day trial to test the waters before you purchase.
https://www.apple.com/final-cut-pro/trial/
MtD

HT4664 I have problem running final cut pro X because NVIDIA GeForce 7300 GT graphics card I live in a remote area what are my options to fix this ?

I have problem running final cut pro X because NVIDIA GeForce 7300 GT graphics card I live in a remote area what are my options to fix this

This is the list of Apple approved graphics, except for the cards for laptops. Replace your card with one of these. Get the best you can afford.
NVIDIA
GeForce GT 120
GeForce GT 130
GeForce GTX 285
GeForce 8800 GT
GeForce 8800 GS
Quadro FX 4800
Quadro FX5600
ATI
Radeon HD 4670
Radeon HD 4850
Radeon HD 4870
Radeon HD 5670
Radeon HD 5750
Radeon HD 5770
Radeon HD 5870

Final cut pro X crash

final cut pro X crash

FCP X runs very well (not perfectly, by any means) on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB
First, check the spec of your iMac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Particularly your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Create optimised media.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project library and put any projects you are not working on currently, in there. (Twirl it closed to hide them).
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

How to download Final Cut Pro X app

Hi, I just bought Final Cut Pro X. It says downloaded already, but I couldnt find it anywhere,no track,no file. They say go to purchase page and download from there, but only INSTALL button, I clicked but nothing happened. I did it over and over after realized nothing happened. my Mac Book Pro system is fit, 10.7.5. I did clean all my Final Cut Pro Trial file already. Please help.
regard,
Pongge

Final Cut Pro X should download into the “Applications” folder...
If you still can’t find it ? / Repair Disk Permission / Restart your computer...
Installation:
http://support.apple.com/kb/HT4722
Graphic Card compatibility:
http://support.apple.com/kb/HT4664
Sign-In into the “App Store” application...
Go to Purchases / Final Cut Pro...
If the “Install / Download” button is still highlighted ? / click on it...

Final cut Pro quit unexpectly

Hi,
My Final Cut Pro X
quit unexpectly why? is doing that
and how i fix this problem...

This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
Make sure you're using the latest version of the application - FCP X 10.0.5 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.5.
First, check that you have at least 20% free space on your system drive.
For smooth playback without dropping frames, make sure 'Better Performance' is selected in the FCP X Preferences - Playback Tab.
If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install of the OS would be recommended.
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
If your playback in FCP X is not good, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
The downside of 'Proxy' is that it looks awful. DON'T use Proxy when you're assessing things like video quality - especially focus.
If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Personally, I work with XDCAM EX and h.264 from a Canon DSLR. Both of these run fine with my system, but I do transcode multicam clips.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
http://assistedediting.intelligentassistance.com/EventManagerX/
Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
If you're getting crashes and none of this helps, you might have incompatible or corrupt media or project files. Move ALL your Events and Projects to temporary folders so that FCP X doesn't find them on launch. If it launches OK, re-introduce the Events and Projects one at a time, re-launching each time, so that you can track down the corrupt or incompatible files.
If FCP X doesn't launch (with no existing Events or Projects) I suggest you drag the application to the trash and reinstall it from the AppStore (using the same login that you used to buy it).
Andy

Mini-Dvi to Video out from Final Cut Pro working

Thanx Everybody for posting reply for my post regarding running video out to external TV from Final Cut Pro in MacBook.
It's working fine.

@ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
@ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

How to use Final Cut Pro with multiple user accounts?

Hi,
I want to use Final Cut Pro on a clean user account. How do I set it up? How can I access my old FCP library and still work on it from multiple users?
Also, I want my DropBox account to back-up my media. Any tips?

I use external drives as backup. But I don't trust them. And in case of fire or what ever...It is of no use...
But I agree on your comment about DropBox. It would have been the perfect solution though.
What else is there?
I have a 2TB HD but these projects are huge and still growing - so I have to move my projects to several external drives. So maybe I should just work directly from external drives and skip the partition of the computers main drive? I am thinking of the disadvantage of reducing the total storage of the disk.

What's wrong with my Final Cut Pro 7.03?

What's wrong with my Final Cut Pro 7.03?
I have just started up a new project.
Every time I try to ad a clip in top of each other a "general error" shows up. The sequence viewer turned red and it displays that I have to close and reopen the window to restore.
The only "new thing" I do - is the use/brand of camera.
Now I use the canon D5 mark 3 for my project (before D5 mark 2)
What's wrong??? Do I need to update my Final Cut Pro 7.0.3 And how do I do this???
Final Cut Pro 7, Mac OS X (10.6.8)

Did you use Log & Import? Or did you at least convert the D5 files before importing? FCP doesn't work with those files natively.
-DH

How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

How do I get a folder to open up in Final Cut Pro version 6. I'm on a MAC OS X Version 10.6.8. The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive. When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found. Unable to import this file." When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file". What should I do or what am I not doing?
Cliff

YYou should ask this question on the Final Cut Studio forum.

How do I capture HDV in Final Cut Pro 6.0.6 from a Sony HDR-CX360?

Hi. I recently upgraded to a Sony HDR-CX360 Camera. I've been importing off of Firewire with my older cameras. Now I face only being able to import with USB. It is not recognizing the camera. How do I import with this kind of camera and Final Cut Pro 6.0.6.? It works fine with iMovie.

Hi,
There are a couple of things I would do in your position .. first off make sure the camera is turned on and connected BEFORE I start FCP. another would be to run up system profiler and have a look in FireWire - and see (obviously with the camera connected) is it listed in there .. If not in effect the MAC is not seeing the camera and Failing that if it is a six pin on the camera connect to a six pin port .. I had issues with a Camera (Canon XHA1s) which the MAC Pro FireWire (8 pin) would not list the camera until I installed an two port 6 pin FireWire card .. It works every time now. Hope you get it sorted ..
Jim

Can not get Final Cut pro to capture HD footage from Canon HV10

Ive had soo much trouble with no success, in trying to get footage from my HD camera into Fina cut Pro HD 4.5. I can get normal dv footage when i cahnge the setting s on the camera, and Final cut pro, but HD is not been possible so far.If any one can inform me of anything, is it possible at all to capture from my camera in HD, do i need Final Cut Pro 5? Do i need pluggins? Anything!! I want to capture HD quality!
Powerbook G4 Mac OS X (10.4.9) 1.5GB MEMORY

You need to list the camera you are using, the settings you shot on and the settings on your sequence (easy set up etc)

Export Final Cut Pro 7 project to open in FCP 6?

Is there any way to open a final cut pro 7 project in final cut 6?
We have a bunch of older Macs that won't run FCP7, but we use for training but our hope was to upgrade the newer machines to the new Final Cut Studio, but it would be great if we could create something on the newer machines, that we could transfer to the older ones.
We tried XML export, but it didn't look like it included filters and such, so we are wondering if there is any other way?
Regards,
Karl M. Moberg

Nope. no other way.
Shane

HT4664 Final CUT PRO X

Similar Messages

Maybe you are looking for