HT4682 I have a samsung full hd 1920x1080 camcorder that doesnt seem to be compatible with final cut pro because when I try to load the videos onto it, the stills are just black and all I get is sound. Can someone help me?
Yeah any help would be appreciated.
I can't find any information about what format and specs this camera shoots. The only think I can find online is the manual as a PDF, which I'm not about to read. Maybe you could look through it and see if you can find out the specifications that this camera shoots. In all likelihood you'll have to convert the media using MPEG Streamclip or Compressor.
Similar Messages
-
I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?
at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi. -
I purchased a movie from iTunes and when i try to play it on my mac or iphone its just black and has no sound...
help please!Are you going to Movies - Purchased or Computers - Movies ?
If you go to iTunes Store on your computer - Quicklinks - Purchased. Is it showing up there?
Is this a purchase or a rental? -
I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
Geoff2T wrote:
I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
It is just as the message says. Your video card is not compatible.
You can add a compatible graphics card and use FCP X with your mac. I can't suggest which one, but maybe other people on this forum can guide.
And you may also get good suggestions in the Mac Pro forum. -
I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!
RESET YOUR ROUTER
No. Reset your router. -
I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?
I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?
Hi Nick, thanks for your help, Im rather new at editing and FCP. I did everything as it said to do in the MPEG Streamclip download tutorial, but when it finished, I tried to open the .mov files and it was just sound but no picture, just black.
Now, another thing, the .mov converted files where saved into mi SD card after the program was done (is that ok, or should they have been saved somewhere else too?) then i tried to put them into my FCP by using the Log and Transfer and when I selected that it gave me this message: "100MEDIA" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
Help please!! I know that these problems are probably from my lack of knowledge on the program and the whole thing.. but im working on it!!
Thanks!! -
Is Mavericks compatible with Final Cut Pro 7 and the rest of Studio 3?
I still use FCP 7 and limp along, but recent updates of FCP X are encouraging. Until I'm ready to take the plunge, would someone tell me if there's been any feedback re Mavericks' compatibility with Final Cut Pro 7 and the other software in the Studio 3 Suite - especially Compressor and DVD Studio Pro? I'd love to dl Mavericks but not if there are compatibility issues.
Thanks ~Going from SL to Lion is not advised. Start clean.
Install Lion. Run updates. Install FCS. Run updates.
x -
Is OS X Lion compatible with Final Cut Pro 6.0.6 and Digital Performer 6.02
I'm currently running OS X 10.6.8 and my Final Cut Pro 6.0.6 and Digiital Performer 6.02 work fine.
I want to upgrade to OS X Lion to take advantage of iCloud but I do not want to have to upgrade the FCP or DP programs.
Are my current versions compatible with OS X Lion?
Thanks,
BrettSee my tip:
https://discussions.apple.com/docs/DOC-2465 -
This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.
Download again using another browser and this method:
Direct Download Links for Adobe Software
Mylenium -
I am using Vista (64) and Photo Elemnts 7 to access. When I try to load the “Editor” regarding any photos from “Organizer” I get the message “Runtime Error!
Program:,,,,Adobe\Photoshop Elements 7.0\PhotoshopElementsEditor.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.”You have the latest release version of Firefox, ignore those prompts from Yahoo about updating. They're trying to entice you to install their special "Yahoo enhanced" build of Firefox, that has extras which many people consider as being Malware.
-
I purchased an album from iTunes using my desktop computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to these devices. Any ideas?
Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though
-
I have been using my DEBIT card for over a year but recently I had to update my billing information, since then it will not accept my card. All the information is correct, it's just telling me to visit iTunes support. Can someone help me? Much appreciated
Debit card? Are you sure?
USA iTunes Store does not appear to accept debit cards - http://www.apple.com/legal/itunes/us/terms.html "The iTunes Store, Mac App Store, App Store, and iBookstore services (“Services”) accept these forms of payment: credit cards issued by U.S. banks, payments through your PayPal account, iTunes Cards, iTunes Store Gift Certificates, Content Codes, and Allowance Account balances." -
When I try to install the update"MAC OS X Update Combined, I get a message that says it cannot be saved & connection reset by peer. What do I need to do to get this update installed. I just purchased my first iMAC and don't know anything about it.
Try here:
http://support.apple.com/kb/DL1524 -
Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help
Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M. -
I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?
Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.
Maybe you are looking for
-
I need help on how to look up a multi column MULTI ROW table given two variables which exist row one and column one cells. Something like .... Lookup Column One to find X then lookup Row One to find Y then pull the content of cell XY and insert ... J
-
Wen I gonna pre-order the apple watch only let me put free shiping an i want to pick up at the stores wen they have available so can i put free shiping but then pick up when they have at stores ???
-
What antivirus protection should I purchase for my MacBook Pro? MacSecurity.app appeared on my desktop, and I downloaded that. Since then, it has said my computer is infected and pop-ups have been appearing.
-
CTP5 Setup Crash on install Win2012 svr. R2
Hi, i try to setup an new VM with windows 2012 r2 server and install the VS2015_ctp5 on it, Setup stopped every time with error. Visual Studio Services Hub Incorrect function. here's the log 0D9C:0D64][2015-01-27T21:03:07]e000: Error 0x80070001: Fai
-
CREATE OR REPLACE PROCEDURE return data like SELECT statement
"SELECT * FROM SEARCH_KEYWORD" is successfully done and return the data of the tables. Now, I want to run that on server side using PROCEDURE. I successfully executed the below scripts. Please teach me how to call the sp_test procedure. OR if you hav