HT4718 am trying to install OS X Lion for the first time. So far it has been downloading for about 2 hours. How long should it take?

Can anyone help please?
Lion download to iMac has been running for about 2 hours and is still not halfway yet. How long should it take? should I cancel and start again?

1500Kbs is 1.5Mbs. That is Kilo bits per second. There are 8 bits to a byte so if you divide 1500 (or 1,500,000) by 8 you get 187500 bytes a second. Divide 3.5GBs (3,500,000,000), that capitol B is for Bytes, by that 187500 you get 18666.666 seconds. Which needs to be divided by 60 to get the minutes and then again by 60 to get the hours.
5.1851xxx hours.
I use to have a 3Mbs DSL connection and it took me over 3 hours to download Lion. Now that I have a 19Mbs Cable connection it take about an hour to download and install.
So wait it will happen eventually. If you cancel and start again your are still going to wait 5+ hours.

Similar Messages

  • Trying to open Premiere elements 12 for the first time even though I had it loaded for a while.  It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct).  Any suggestions?

    Trying to open Premiere elements 12 for the first time even though I had it loaded for a while.  It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct).  Any suggestions?

    First we need to check , whether the LAN settings is set to detect settings Automatically or not.
    Follow below steps .
    1)Open Control Panel and then click on the option "Network and Internet" .
    2)Click on Internet options, click on 'Connections' tab.
    3)In the 'Connections' tab, select 'LAN' settings, you will be able to view the Local area network settings box.
    4)Check the box-"Automatically Detect Settings" and then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' ,then click on ok button .
    5)Click on "LAN settings" button again , make sure "Automatically Detect Settings" is the only option selected, keep the LAN properties window open.
    Then launch Premiere Elements 12 and try to sign in.
    If the settings were already set like that or you face same issue after signing in , let me know

  • How long should it take for my mountain lion to download? its been almost 12 hours, how long should it take for my mountain lion to download? its been almost 12 hours

    how long should it take for my mountain lion to download? its been almost 12 hours, how long should it take for my mountain lion to download? its been almost 12 hours

    Welcome to Apple Communities
    The Internet connection can do it slow or fast. If it's slow, it will take more time

  • I have tried to download update for Firefox 3 separate times ,but each time it runs for more than 30 minutes and is still running, is this normal,? How long should this take?

    I have tried downloading the update for Firefox 3 times, but had to go to bed before it was finiahed....seemed to be more than 45 minutes is this normal? How long should it take?

    Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
    http://support.apple.com/kb/TS1591

  • I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

    I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

    Demons1 in the future please only migrate your documents and settings.
    Please use the uninstallers to remove your current installation.  They are located in the Applications/Utilities/Adobe Installers folder.  Once the uninstall is complete you will also want to run the CC Cleaner Tool.  You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
    If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

  • Trying to install creative cloud for the first time and getting error code:1

    im trying to install creative cloud for the first time but im getting a error code:1
    what can I do?

    Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
    Mylenium

  • TS1398 I am trying to install my ipad for the first time. I can't get it to recognise my password to my o2 server. What do I do?

    I am trying to install my ipad for the first time.  How do I know what password to use for my server?

    Only you or the person responsible for the server knows.
    What do you mean by server?
    BTW, you posted in the iPod touch forum.

  • I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • Installed Firefox 3.6.8 for the first time and it keeps crashing

    I just installed Firefox for the first time and when it is finished installing I tell it to start. It tries and as soon as it does I get a crash report. Every time I click Restrt Firefox it comes up with the same crash error, which is the following:
    Add-ons: {C1CA7765-44E4-452e-9D00-A04F3D434281}:1.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.8
    BuildID: 20100722155716
    CrashTime: 1283492259
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1283492203
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 2
    StartupTime: 1283492258
    Theme: classic/1.0
    Throttleable: 1
    URL: http://my.yahoo.com/
    Vendor: Mozilla
    Version: 3.6.8
    This report also contains technical information about the state of the application when it crashed.
    I am running this on a Duo Core processor, Intel, Laptop, Windows 7 with 4-gigs of ram. I have never had a problem with other programs crashing like this before.
    Any ideas? I have never used Firefox and after 20 years have decided to try something new.
    Thanks for any help.

    You mean out of this whole community no one knows how to fix this ... I wanted to give Firefox a try, but honestly, I am starting to see why I have not switched from IE, it is stable and I get answers when I post to the Microsoft boards as well as the answer to everything I have ever had an issue with is out there ... what is worse is that I am not the only one with this problem and no one can still help because I am sure us five are not the only ones that have run into this.

  • I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

    I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

    For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

    mike frischenmeyer
    What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
    Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
    know the details and troubleshoot to determined what caused the problem.
    1. Can you open a new project?
    2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
    for that project?
    3. Please review the Adobe document on troubleshooting damaged projects.
    Troubleshoot damaged projects | Adobe Premiere Elements
    4. What are the steps that you are using to reopen this saved closed project.
    a. File Menu/Open Project/Name of Project
    b. Other
    Please review and consider and then we can decide what next based on your further details and results..
    Thank you.
    ATR

  • How long should it take to download Mountain Lion?

    How long should it take to download and install Mountain Lion?  I have been downloading it for about 5 hours and it still has 1 gig to go.  My current OS X is 10.7.4

    It depends on what bottlenecks you have interposed.
    If you have a fast Ethernet connection, not cable Internet, that is not throttled by your ISP, and are using fast Ethernet on your local network, you should be able to download in about an hour.
    If you are transmitting it over your wireless connection, it may take substantially longer.

  • I'm trying to use my iPad mini for the first time with a previous apple ID and password but it will not connect to iTunes but I can download apps from my iPhone using the same appleID and password and it works on my iphone...PLEASE HELP NOW

    I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID & password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!

    Previous user installed iOS 7 beta on that iPhone.
    Take it back and get your money returned. You
    are running into a new security feature. Whoever owns
    the ID that it is asking for is the only person who can
    remove the security. That iPhone is worthless to you.

  • When tried to login WebConsole for the first time 404 not found error got

    Hi All,
    We have recently installed MI 7.0(NW2004s) and configured also as per the configuration document. But when we tried to login WebConsole we are getting the error of 404 not found. I donot know what and where I have test to login to WebConsole.
    Is there any way how to test to login to WebConsole for the first time.
    Appreciate your help.
    Regards,
    Ameer Baba.

    Hi Ameer,
    Can you please try with the link "http://servername:portnumber/nwa", this is to open NettWeaver Mobile Administrator, as on the above reply Namitha said there is no Webconsole on MI 7.0(NW2004s) .
    Regards,
    Satyendra

  • How long should it take a well-qualified server admin to migrate from Tiger to Lion...

    How long should it take a well-qualified server admin to migrate from Tiger to Lion...
    For a small company, if the Tiger server is running on a G4 Tower:
    -Roughly 500GB in user files
    -Data resides on old-school ATA drives
    -OD Master - Kerberized
    -AFP
    -Mobile Homes
    -DHCP
    -DNS (for 2 domains)
    -FTP
    -iChat
    -Mail (non SSL)
    -NetBoot
    -Print Server
    -SWUPD
    -VPN
    -Hosting website using MySQL
    -User & Computer Management
    Considerations/Hurdles/Challenges:
    -Tossing old G4 into garbage, upgrading Mini client to Snow Leopard, adding Lion iMac client to the LAN
    -Fresh OS installs on the Mini and iMac
    -Upgrading from CAT5 to CATE on the LAN (not it the walls - just loose cables)
    -All new hardware must be sourced out (take some time to price compare)
    -Must find a way to transfer data from ATA drives to SATA drives or Lion Server
    -Company must not have any email downtime (MX Records to be modified on DNS Providers site)
    -Servers hostname goes from "companyserver.company.com" to "server.company.com"
    -ISP blocks some SMTP ports
    -DNS Provider doesn't support TSL/SSL SMTP
    -Implementing a switch into the network
    -Implementing a new router (for firewall and NAT) from ISP
    Upgrading to Lion Mini Server
    -All the same services
    -Using SSL
    -Implementing Mobile Device Enrolment and Deployment
    That should just about cover it. I'll add any other details/hurdles as they come to mind.
    Can you guys give me your best guesstimate as to how many hours you think this job should take? I'd appreciate any feedback as to how long you guys think it'd take you to make this transition. I'm trying to plan, and we're going to be down-and-out, the boss NEEDS to know for how long.!
    Thanks in advance guys!

    It's about a gigabyte, so if you have a slow connection, it might take some time.
    But - you shouldn't be getting the beach ball - that's a different thing.
    Can you do open Activity Monitor, or is it stuck completely?

Maybe you are looking for

  • How do I re-populate iTunes from my iPhone?

    My Mac hard drive crashed.  The disk was lost completely.  The Apple store staff gave me a new hard drive, which is a basic OS load.  I need to get the contents of my iPhone (music, contacts, the few photos I have left) transferred to the iTunes libr

  • How to read files from MIT-BIH arrhythmia database using labview

    hello friends, How can i read the files from MIT-BIH arrhythmia database using labview 8.6. These file extensions are in different format ie is .atr, .dat and .hea  The link for the following database is below, any example vi for reading this data in

  • Update Statement in ODI Procedure

    Hi All, I want to update a value in a table through ODI procedure I Created a procedure,added new step,given details like Technology,Context,Schema in Command on target on the command: i was trying with:- update table_name set column_name1='value1' w

  • Problems implementi​ng the elapsed time express vi into my vi

    I am trying to implement the Elapsed Time Express VI into my VI so that my VI runs for a specified amount of time. I currently have the express VI working, but now that I have implemented it into my VI, my graphing functions do not work. If anyone ha

  • Help: Why cann't I install WebLogic Integration?

    Hi, I have installed WebLogic Server 6.0 on e:\bea (Windows 2000). When I install WebLogic Integration 2.0 sp2, I get the message "WebLogic Server 6.0 is a prerequisite for this installion, you do not seem to have it installed to e:\bea". How can I d