HT4718 iMac frozen on white screen

My iMac got stuck in safari last night, did force quit, took a while for it to sort itself out, log in this morning ok, come back later frozen.  Restarted cant get past white screen with logo and white spinning wheel, have tried command + r, holding shift key, holding D. Only have keyboard in USB port. Managed to get to disk utility screen and select restore from TM machine but it was searching for disk to restore to and seemed to be stuck, have also managed to get to screen where you select mac drive but once selected it just goes to the white spinning page.  Have a windows keyboard plugged in so any help need to remind me which key to press.  Thanks

Hi there, sorry to say but my hard drive was fried we think due to a power cut that happened around the same time so I had to get it replaced, thankfully I had the trusty TM backup so didn't lose anything, hope you manage to fix.  I searched and tried out all the tips that I could find beforehand.  I took it to an Apple Technician who ran a test on the machine for me.  Good luck.

Similar Messages

  • 2007 intel based iMac has the white screen of death with the mouse visible?? WHATSUP

    My 2007 Intel based IMAC has the white screen of death with the mouse cursor as the only visible item.  What is up with this?  Is this the equivalent of the windows blue screen of death?
    Doug

    Read the "More Like This" thread links located at the bottom left of this page.

  • Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

    Imac frozen at blue screen after i went into disk utilities and cleaned  free space.
    I tried holding down T key as it reboots
    and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
    to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
    please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
    Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
    Thanks

    i tried all this thanks
    i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
    no matter what you tell me
    Am i right ok in thinking that
    when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
    i came back and there was no progress bar just the box so i quit the program and when i opened  mac mail the system just froze  i forced quit mail rebooted and blue screen death
    Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
    basicly is my hard drive full of 00000  is this why im getting this message  because the process was interupted
    I need to know if i need outside help i bought the computer on line on  amazon uk  what dose one do next

  • Imac has a white screen

    my imac has a white screen when I power it up.  It was working.  The screen froze so I powered it off.  When I turned it back on, i get a white screen.  periodically a folder with a question mark appears and disappears.  Anyone know what the problem is.

    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
    ============
    How To Fix White Screen On Your iMac
    http://www.youtube.com/watch?v=4aZ71BGTkPs

  • Intel Imac stuck at white screen and 3 beeps sound continously....

    Intel Imac stuck at white screen and 3 beeps sound continously when power on. Pls help......

    Well Barry, as for the Ram, all this while are install by apple technician since very day i bought iMac on july 2008. Just wondering What's actually went wrong..
    Very first day I bought iMac, few days later, system cant even on. AppleCare Centre exchanged a new set of iMac.
    two weeks later, i notice several dead pixels appearing on screen, call to log a case with them, later on, they changed a new panel.
    After several months pass, been using happily with iMac... but since now, this problem occurs. So fastrating... My third time encounters problem with iMac. sign
    Any suggestion? If not, I guess i have to bring this bulky iMac to applecare centre again. sign

  • HT201263 APP store indicates 1 update.  Press "store", "loading" briefly on screen then white screen with updates bar on top.  Press updates button in lower right; nothing happens frozen with white screen and still indication 1 update.  Other store featur

    APP store indicates 1 update.  Press "store", "loading" briefly on screen then white screen with updates bar on top.  Press updates button in lower right; nothing happens frozen with white screen and still indication 1 update.  Other store features and ipod work ok

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>iTunes and App Stores and sign ut and sign back in
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    Also see:
    https://discussions.apple.com/thread/4751197?tstart=0

  • IMac Freezes at white screen during startup

    Hello,
    I was off of my iMac for an hour or two so my screen saver when on.  I went to wake the computer and it was frozen.  I tried using the keyboard and mouse to wake up the computer from the screen saver, but it would not work, so I powered the iMac down manually from the button on the back.  I let it sit for 15 minutes, then I tried to start the computer up again.  Now at start up, I get to a blank white screen with the spinning moving pin wheel, and that is it.  Any suggestions?

    You could try to use SafeBoot mode on startup, essentially you'd hold the Shift
    key down on startup, perhaps you may need to login after waiting quite awhile,
    then continue holding the shift key down until you see a traditional desktop.
    And then use Disk Utility to verify HDD, & repair disk permissions.+ Restart.
    Or if you have a system install-restore DVD, boot from that and have the
    Installer's version of Disk Utility check verify repair the hard disk drive.
    It can also repair disk permissions, too, from the booted version of D.U.
    Then when it is done, choose the startup disk from installer menu options.
    The DVD should eject, but if not, it should be ignored as a boot volume
    after you've chosen the Mac HD as a boot system.
    PS: If your computer is now running a system later than Snow Leopard,
    where no DVD would be needed if it has a Recovery partition in the HDD
    then you could see about booting into Recovery (command + R) to access
    the later system's OS X Utilities, and choose Disk Utility to check/repair, etc.
    These may help.
    Good luck!
    edited

  • IMac Stuck on White Screen with Apple Logo

    Currently own: iMac 21.5" 2009 version with Snow Leopard, 4GB Ram, 500 GB Hard drive
    This computer was sitting in storage of my basement for 2 years because I was out of town on business.
    When I came home the computer worked fine. But earlier this evening it was on sleep mode and the dreadful color wheel was on. So I rebooted it, only to see that it was stuck on the white loading screen with the Apple logo. And nothing more. Panic struck me and I tried restarting it again, to no avail. Then I tried rebooting in Safe mode- but it won't respond. THEN I called Apple Care, and they tried to have me go through the process where it checks the Hardware. It took 45 minutes and then the screen said "It was modified", or something to that degree. But when we reboot it, it returned to the white screen.
    I am so upset. I now have an appointment with the Apple store on Monday. I don't have a warranty anymore. How much is it going to cost if they have to replace to hard drive? I thought Apple computers were meant to last! This is beyond ridiculous! I had not downloaded anything wrong, wasn't on crazy websites. It still had over 350 GB of space left. Why didn't the tests we did over the phone work? Is my computer broken? I do have an external hard drive with Time machine, so I am not concerned about losing my data. I am, however, concerned about shelling out another $1500 for a new computer!

    If you are taking it to Apple they will fix it for you, but they will install Snow Leopard. If you want the current Mavericks you can download that yourself from your home and install it. This is dependent somewhat on what model you actually have.
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion or Mavericks
    To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    I can't help you any more if you don't have the installer DVD, so you will have to wait until Monday. I had hoped we might get you working before then, but that isn't going to happen, I"m afraid.

  • My iMac has a white screen with a flashing file folder with a question mark in the middle.  What does that mean?

    My iMac is completely unresponsive.  Whenever I restart it, it's just a white screen with a flashing file folder with a question mark in the middle.  What does this mean?

    this means the mac cannot find the startup disc. which more times than not means you need a hdd replacement.
    try starting holding the option key, then using utilities try to repair the disc.

  • IMac starts shows white screen and shuts off

    my iMac starts fine, I hear chime, white screen with apple shows, but also shows a bar under the apple...
    it stays on a minute then shuts off...

    It's most likely the macbook pro 2011 denied by apple GPU problem many many others suffer from too.
    you can read about it here if you have a few days.
    2011 MacBook Pro and Discrete Graphics Card:
    https://discussions.apple.com/thread/4766577
    728 Pages long allready, still no repsonse from apple.

  • On power startup my Imac shows a white screen then subsequently a flashing question mark-- will not open

    My iMac shows only a white screen and then a flashing question mark on power start up and will no open display

    Help here >  A flashing question mark appears when you start your Mac

  • 80G iPod frozen - constant white screen

    Hello:
    My 80G iPod is frozen. It displays a solid white screen and will not reset. iTunes will not recoginize it. This just happened suddenly today. Any advice?

    Never mind, I finally reset it.

  • IMac crashes into white screen

    iMac (Early 2008), OSX 10.8.2 randomly crashes, displaying only a white screen. Is there any indication what this could be or how to approach the problem? Also, where can we find the Apple Hardware Test (AHT) for the iMac?

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My imac stuck on white screen on startup

    hi i got a late 2009 27" imac with i7, recently i restart the imac, it just keep stuck on the white screen right after i hit the power, no apple logo no chime, just blank white screen. i unplug the power cord for 1 hour and plug back in still the same.

    Start your computer with the original DVD that came with system and repair your disk with disk utility, also repair permissions.  http://support.apple.com/kb/TS1417

  • Imac 21.5 white screen on boot up

    I have the A1311 2009 21.5" iMac. The computer was running fine. I changed startup disks to boot off of a friend's external USB backup to get some files off for them (I needed to export their address book and get other various files)
    When I finished getting what I needed under system preferences I changed the boot up drive back to my imac's internal drive and clicked restart.
    The computer restarted gave the startup chime and stayed at a blank white screen. No spinning sprocket.
    I am using a usb keyboard and usb mouse.
    The only boot keyboard command that works is command+option+p+r and when I do that I get the chime and a reboot.
    I've tried resetting the SMC by unpluggin it.
    I've tried inserting a disk warrior cd to boot off of it, but it doesn't boot. And holding the mouse button on startup does not eject the CD.
    I've tried holding c when booting to boot of the CD drive.
    I've tried holding option when starting. I've connected my own bootable USB backup and held "option" when starting.
    I've tried holding shift when starting. I've tried command+r when starting.
    Nothing happens. I always get the chime and then a white screen.
    Looking online, it looked like several macbook air/pro owners with a similiar problem disconnected their HDD and then were able to boot off an external source. So I took off the glass and LCD and disconnected the 3 hdd connectors, put the screen on and tried booting again using all the steps above and every time always the same, a chime and then white screen.
    I took all the ram out and when it was turned on got a low intermitent beep and black screen. Put the ram back in and get the startup chime and white screen.
    I'm at a loss as to what else to try. I can't see how booting off my friend's external usb hdd would lead to this.
    Any suggestions.

    I reopened the imac, removed the optical drive (hdd was already out). Restarted with my USB external HDD connected, nothing happened, white screen still. I then reconnected the friend's USB HDD also and restarted and got the screen to choose a startup disk.
    Computer then boots fine from my external hdd. Turn it off, reinstall my HDD and optical drive.
    Turn it on again and am greeting with the same blank white screen again.
    I then remove the optical drive again and am able to boot from the internal drive. BUT when I go to system preferences to change startup disk, if I check the internal drive or the external USB drive and click reset I got the error "building boot caches on boot helper partition failed". I have no idea what is going on. I repair permissions several times.
    I then restart the computer several times and it seems to restart consistently from the internal drive. I then put the optical drive back in and it now appears to be working.
    The original external drive I booted from was a 10.5 macbook pro cloned drive. So I don't know if that somehow corrupted my 10.8 imac drive or some firmware that made it such that it wouldn't boot.
    What a hassle.
    And for anyone who cares and has read this far, I am living in a remote town in Mongolia at the time and didn't have any suction cups to remove the front glass from the imac. I do have an iSesamo tool to open up ipod touches and such, and was able to use that to get the front glass off.
    If anyone has an idea of what happened I'd be interested in hearing.

Maybe you are looking for

  • Custom Logic addition to display Sales order Report

    Hi Gurus, I need the list of sales order which are open on the given date. I  have copied the Standard Transaction VA05 to ZVA05N and added a custom field 'Open at key date' to enter the date. Now my requirement is : I need the list of sales order wh

  • Usage of  XSLT_TOOL  Transaction

    Hi All I have gone thru previous blogs related to XSLT mappings.In a few of them I could see that there is a mention of XSLT_tool transaction for XSLT-ABAP mapping.. Can anyone please provide me some details as to when this will be used.I mean is it

  • FaceTime isnt working from imac to iphone 4???

    im trying to facetime my mum through facetime from my imac to her iphone 4 its ringing however when it comes to connect it just say call failed. iv tryed making a new apple id, looked through my router settings, just dont know were to turn please can

  • On field Cost Center in VA01

    Hi Experts, Please help me! I am integrating SD with FI-CA. I would like to add the field cost center in the tab account assignment. How can I do? Thanks

  • Allow embedded flash video to be maximised to fill the screen

    I want the user to be able to click a Full Screen button like YouTube so that the video fills the whole screen. I think this is done by using the code allowFullScreen but I can't get this to work. Here is my code: <div align="center">   <embed src="F