HT4718 Tried rebooting Lion numerous times with Command-R but get no recovery HD?

Apparently my disk needs repair, and I am told to reboot, hold Command-R until the Apple logo appears, and then go into Disk Utility. I've tried 5 times (starting holding the keys at various points, like before the reboot, immediately after the reboot, etc). Every time I just get my login screen. Does anyone have a suggestion?
Thanks!

Are you using a bluetooth keyboard? Sometimes they can be a "pain".
The time to press ant of the boot key sequences is just after or during the boot chime.
If you cannot boot into the recovery partition with it's key sequence then I would assume you would also have a problem booting into the boot list using the option key (not the command key).

Similar Messages

HT1695 My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It used to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It use to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT201210 Ipad 4 rebooted automatically numerous times...froze up...hard restarted using home and power...put itself into restore mode "connect to iTunes"...I did this but I get error '1600' and can't perform restore...i've exhausted all fix options for '1

Hi folks as in the title:
My Ipad 4 froze up and rebooted automatically numerous times.
It then immediately froze up completely and didn't try and reboot itself.
I then hard restarted the device using the home and power buttons simultaneously.
I got the Apple logo and saw my desktop for a moment and then it froze up.
Hard rebooted again only this time I saw "connect to iTunes".
I connected the device to my MBP and iTunes where I was told it was in restore mode.
I followed the on-screen instructions in iTunes to restore the device.
I spent 15minutes downloading the necessary files etc only for the restore to fail through error code '1600'.
I explored this error code in Apple support and followed all Apple's suggestions, and subsequently tried the restore each time.
I have now exhausted all fix options for '1600'...and I can't even get 'connect to iTunes message' on my iPad device now.
Any suggestions would be welcome please?
Kind regards.

Thanks for the response Demo.
Unfortunately I don't have another computer with which to try a restore from.
I've tried to reboot the iPad again using the sleep and home buttons (whilst it is unplugged from my MBP) and it remains completely lifeless. I know there is 80% battery life in the device as I had it charging when it malfunctioned.
I've tried recovery mode through iTunes in excess of 15 times now all yielding the same and inevitable result of 'error 1600'.
I think it's time to get to know the team at my local Apple store...

Bridge from CS3 won't open and just sits on the task bar. If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

Check System Preferences > Energy Saver
Select: Put hard disks to sleep when possible
Then click: Restore Defaults

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268

Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

HT1310 when i starst my mac i get a flashing folder with a question mark. i tried rebooting and holding the option button then i get 2 boxes, one with a refresh arrow and one with a forward arrow neither of them seem to do anything. now what

when i starst my mac i get a flashing folder with a question mark. i tried rebooting and holding the option button then i get 2 boxes, one with a refresh arrow and one with a forward arrow neither of them seem to do anything. now what

Here is an article that describes what it is supposed to do:
Startup Manager: How to select a startup volume
If no Volumes are shown, it is telling you there are no potentailly bootable Volumes attached. That means your boot drive has died or the bootable image on it is unrecognizable.
What Mac Pro ? by year, GHz, number of processors, screen size?
What Mac OS X ?

I've purchased numerous books through itunes and now I'm unable to open ibooks; I get a "book format error, delete and redownload" which I've done numerous times with negative results.

I've purchased numerous books through the itunes store in which I was able to read. Now I'm unable to open some of the ibooks that I've purchased, I get an error message...book formate error, delete and redownload, which I've done numerous times with negative results. What are my options?

within the receipt that Apple sent to you via email is a Report a Problem link. use that link to report your issue.
also you could try a basic reset and see if that resolves your issue. hold down the Lock button & Home button at the same time for ~15 seconds, the iPad should then perform a reset.

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command S, I get a looping "cannot mount errno = 19" message.

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.

It's a false report and should be ignored.
I would not rely on TT as I've already said earlier even before Grant posted similar advice.
I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Proceed with reinstalling OS X.
5. Download and install Mac OS X 10.6.8 Update Combo v1.1.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer.

Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?

Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?

Are you sure you have a 3GS and not a 3G? The 3G cannot be updated to iOS5. What version are you on now?... Settings > General > About > Version

My ipod 5th generation is frozen on the lock screen and i tried restarting it 4 times and it continued to get stuck what do i do

My iPod 5th generation is stuck on the lock screen and I tried restarting it 4 times and it continues to get stuck on the lock screen. What do I do.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Bootcamp - I'm trying to install windows 8 on my MBPr but getting an error when partitioning the disk. 'An error occurred while partitioning the disk'

I'm trying to install windows 8 on my MBPr but getting an error when partitioning the disk. 'An error occurred while partitioning the disk'

You posted your Bootcamp question in the Macbook Pro forum. Your question has been asked and answered many times in the Bootcamp forum. https://discussions.apple.com/community/windows_software/boot_camp
When you post in the Bootcamp forum include the complete and exact error message.

HT1414 Im trying to restore my Iphone 4S using Itunes but get "unknown error -1 " Does anyone have a solution?

Im trying to restore my Iphone 4S using Itunes but get "unknown error -1 " Does anyone have a solution?

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

HT4718 Tried rebooting Lion numerous times with Command-R but get no recovery HD?

Similar Messages

Maybe you are looking for