HT4743 time and date wont set

time not setting

I have gone through the Manuel and I have been through this whole website. Nothing regarding time not working and how to fix it. I have attempted to I set the time several times and it doesn't work I have been in Preferences and tried to check the time zone/daylight savings time and several other things that may affect it to no avail. I have like I said tried a hard reset deleting everything and then hotsyncing again. I am at a loss. Is there something I should download? Maybe try a hard reset again? I am not a computer wiz this is my first palm pilot so I am lost.
Post relates to: Palm Z22

Similar Messages

  • Can't get past the time and date intial set up screen can anyone please help?

    We purchased Apple TV last night, hooked everything up according to the directions, until we get to the Setting Time and Date Screen, which Apple TV- for more than 12 hours now, has been trying to establish.  We've set the time zone both manually and automatically, I have emailed and tweeted Apple Support but no help so far, this is my last plea before I return it.
    Any help would be appreciated.
    Thanks

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Time and Date Wont change

    Help!!! I have a Palm z22 and everything works great except the time and date will not budge...I called customer service and they had me do a hard reset but it didnt fix the problem. I am at a loss somethiing so little but so annoying...If anyone can help please do..My next step is to send it back to be repaired, unless someone knows a quick fix or mqaqybe something I havnt done..The Z22 is brand new out of the oackage only 1 week ago.
    Post relates to: Palm Z22

    I have gone through the Manuel and I have been through this whole website. Nothing regarding time not working and how to fix it. I have attempted to I set the time several times and it doesn't work I have been in Preferences and tried to check the time zone/daylight savings time and several other things that may affect it to no avail. I have like I said tried a hard reset deleting everything and then hotsyncing again. I am at a loss. Is there something I should download? Maybe try a hard reset again? I am not a computer wiz this is my first palm pilot so I am lost.
    Post relates to: Palm Z22

  • Can not set time and date fax setting on officejet 4620

    Can not set the time and date on Officejet 4620 when faxing.  There are no setup options available.  The log always shows "Jan 00  00:00 AM".

    The time and date setting should be under the setup tools or fax setting in the printer control panel.1. Click the wrench icon on the control panel of the printer.
    2. Scroll to Tools.
    3. Scroll to Time and date.

  • Time and date are set incorrectly on the routers and switches

    I've just noticed that the date and time on all my Cat4006's, Cat3548's and Cat6000 were grossly incorrect. I was wondering if this would contribute to problems I am having on the network. Does the switches/routers check the timestamp on the packets it's passing and/or append or add thereto?

    Date and time set on routers and swithces will not affect your user data traffic.
    Keeping Date and time synchronized across network devies will help if you are troubleshooting your network.
    If you need to keep date and time synchronized across all the network devices, use NTP (Network Time Protocol)

  • Loosing Time and Date Setting

    Well hello altogether. I couldn't find an anwser to my question. Every time I'm cleaning my powerbook I take out the AC and the Battery avoiding to start the PB (maybe 2 minutes). When I start the PB again after putting the Battery and the AC back in, the time and date settings set back to 1970...
    As far as I know, it was not like that from the very beginning.
    The PB and the Battery are about one year old.
    Any ideas?
    Thanks in advance
    Peter

    Welcome to the Discussions!
    That would be normal since what you are really doing is resetting the PMU.
    http://docs.info.apple.com/article.html?artnum=14449
    Joe

  • Unable to set time and date

    im trying to set up my apple tv just after ive updated to the latest version, but it wont pass the setting time and date screen
    what can i do?
    HELP!

    Hello john.george,
    You may need to verify that TCP port 123 is open and available for use on your router.
    TCP port 123 is used to communicate with a network time server.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • Iphone 5 wont keep correct time and date

    Any one else have the 5 through Verizon? It wont keep time and date correctly. Verizon keeps telling me it's Apple's problem, Apple tells me it's Verizons! Getting the Royal runaround! About to throw it in the lake!

    Hi J.Walsh1,
    Welcome to the Apple Support Communities!
    I understand that you would like help setting the correct date and time on your iPhone 3 running iOS 4. Please refer to the Date and Time section of the attached iOS 4 User Guide (page 198) for assistance. 
    manuals.info.apple.com/MANUALS/1000/MA1539/en_US/iPhone_iOS4_User_Guide.pdf
    Best regards,
    Joe

  • Setting time and date on Apple tv

    After I restored my Apple TV I can't access it, because it stuck on " setting date and time". I tried to set the time and date
    manually but it wont work. When I type my Apple ID to test the network or for home sharing it says wrong I'd or password. I have restarted my Apple TV but
    no luck

    Setting date and time

  • I want to take my apple tv from my home in Canada and us it at the Cabin in the States, but can't seem to get it to set up in the states?  It just keeps asking for time and date over and over.

    We just bought apple tv for our home in Canada, we also want to use it at our Cabin in Montana.  We have internet and can get netflix etc on the Macbook, but don't seem to be able to hook up the Apple TV, it just keeps asking for the Time and Date over and over.  Anyone know what we are doing wrong?

    Hi There,
    Find this here:
    https://discussions.apple.com/message/20125520#20125520
    Problem lies with IOS 6.0
    Restore back to IOS 5.1.1 and set the Location to US you will be ok.

  • TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

    When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

    I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work.  i can't find an automatic update of time zones on my itouch to turn this off.

  • My iphone 3gs has started showing the wrong time  and date. All was fine until this afternoon when it changed.  My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

    My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed...  to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time.  The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time.  The phone can not find my time zone any more.   The only fix I found was to turn off the automatic setting for time.  What is  happening? Ideas?

    just sorted mine went to
    settings-mail,contacts,calender-timezone support
    then turned it off then on tapped time zone and typed london
    this did sort mine

  • Set time and date not working

    Set up time and date is not working, since I changed settings from Saudi Arabia to USA...want time and date from USA?!

    You need to set your location to where you are, not where you might like to be.

  • How do you set the time and date for the fax on the HP Office Jet 4622 All-in-one Printer?

    I installed the HP Office Jet 4622 All-in-one Printer and everything works wonderfu.  However on the test page for the fax the time and date are showing Jan-00-00 00:00AM.  I do not know how to change the date and time.  Please help.  Thanks.
    This question was solved.
    View Solution.

    Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • KDE: Setting time and date automatically

    I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?

    matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
    Have you set ntp correctly?
    Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
    in short try this:
    ntpq -p
    If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array.

Maybe you are looking for

  • L_TO_CREATE_DN function module for creating TO for a delivery

    Hi, I am using L_TO_CREATE_DN function module to create a TO for a delivery and it is working fine as long as the HU, I am picking has quantity less than the delivery quantity or equal to delivery qty. But whenever I try to pick a HU whose qty is lit

  • Missing products at "Apple Support Profile"

    I just logged into the new "Apple Support Profile" site and only my two most recent Apple product purchases are listed. My three macs, and various other products (totaling 9, iPhones, iPods, airport, etc.) are not listed. Why? I've used the same appl

  • Integration points QM-PP-SD

    Please tell meaning of Integration Points. And in QM-PP-SD what are the Integration points?

  • HT204032 Power NAP and Time Machine Backup

    One of the features of Power Nap is to allow backup even when the notebook is in a sleep . i notcied that even when Power Nap is enabled , i loose the backup process immediatly if PC goes to sleep. the condition happens when the backup is already wor

  • Disclosure triangle

    I have a new iPad2 which automatically loaded all my iTunes contents.  I have been unable to delete these contents from iPad2,after following instructions. there was no disclosure triangle lrft of my device.