HT4753 The old "save as" is missing.  How do I file one document in multiple files?

With Lion there is no "save as" so how can I file a document in two locations?
Also, how can I label and file a screen shot as a J-peg?
Thanks for the help.

Duplicate and save the duplicate where you want to.
Open screen shot in Preview > name & save as jpg (double click it, should open in preview automatically)

Similar Messages

  • I have two apple id's and one I cannot remember the password so I made a new one but to update my apps it still asks for the old password... How do I update my apps?

    I have two apple id's and one I cannot remember the password so I made a new one but to update my apps it still asks for the old password... How do I update my apps?

    All content and data is forever associated with the Apple ID you used to download it. You should have reset the password for the original I'd.
    I forgot.apple.com

  • I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??

    I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??
    When i try to restore my Back up using Itunes this is the message i get - "Unable to restore backup as the software is old - Please setup as a new device and then try to restore your backup" - Please advise. If i do so are there any chances of loosing my data. At this point in time i would be happy if i could just retreive my contacts list. Any suggestions would be greatly appreciated.

    Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version.  The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

  • I have an iPod nano 2nd generation and I want to download the songs I have on it to my new computer, as my old one crashed with all the songs on it.  I also got a new iPod and would like to transfer the old songs onto it. How do I do this?

    I have an iPod nano 2nd generation and I want to download the songs I have on it to my new computer, as my old one crashed with all the songs on it.  I also got a new iPod and would like to transfer the old songs onto it. How do I do this?

    Ok so sorry for clogging the community!! I figured it out - you have to copy your videos into itunes manually. I did that, synched and all good!

  • When i syncind my ipad 2 to windows 7 the old photos were deleted so how do i recover the pictures??

    when i synced my ipad 2 to windows7 the old pics were deleted,so how do i recover the old pics??

    Select the photos in iTunes and sync again.
    Connect the iPad to your PC.
    Launch iTunes.
    Click on your iPad under the devices heading on the left sidebar of iTunes.
    Click on the Photos Tab in the iTunes window on the right.
    Select the folder from which you want to sync.
    Select any sub folders within the main folder that you want to include in the sync.
    Make sure that the Sync Photos heading is checked.
    Click on Apply in the lower right corner of iTunes.

  • HT4993 I had a email address in my my phone , and want to change but when pull up download app the old email automaticly comes up how do i change?

    I had a email address in my my phone , and want to change but when pull up download app the old email automaticly comes up how do i change?

    All apps that you have purchased or downloaded are tied to the apple id/email that you use to buy it.  That's why it is showing your old email when you are trying to update the app.

  • Tried numerous times to create account, got the email to verify but the link to verify is missing, how do i verify my email address ?

    Tried numerous times to create account, got the email to verify but the link to verify is missing, how do i verify my email address ?

    Hi,
    Might be something in Here to Help:
    Apple ID FAQ
    http://support.apple.com/kb/HE37http://support.apple.com/kb/HE37
    How do I verify my Apple ID by email?
    Simply follow the link in the verification email that says "Verify Now." Sign in with your current Apple ID and password, then click Verify Address.
    You can also verify by signing in at My Apple ID.

  • I wonder if Apple took up the old mac book pro if we bought a new one, and if yes so how much?

    I wonder if Apple took up the old mac book pro if we bought a new one, and if yes so how much? I have a 2009.

    If the old MBP is working, try selling it. However, so that both you and the buyer can avoid sleepless nights, please review this Apple article:
    What to do before selling or giving away your Mac
    It omits one important thing if the computer came with a OS version older than Lion 10.7: be sure to include the original install disks. Otherwise the buyer may not be able to use the computer and come looking for his money.

  • How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file= export it to them from iPhoto?

    How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?

    Have them install Quicktime on their PC's from Apple's website, that's the easiest fix.

  • The old computer is broken so I bought a new one. I have downloaded itunes but will not sync iphone with the new itunes. What should I do to get all the apps, songs and photos on itunes?

    The old computer is broken so I bought a new one. I have downloaded itunes but will not sync iphone with the new itunes. What should I do to get all the apps, songs and photos on itunes?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT5622 I have two ipads using the same ID and password.  How do I give one of them a new ID and password?

    I have two ipads using the same ID and password.  How do I give one of them a different ID and Password?

    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
     Cheers, Tom

  • Startup disk is full and the laptop can't operate.  How I remove files for it to work?

    Startup disk is full and the laptop can't operate.  How I remove files for it to work?

    Can you turn on the Macbook Pro?
    If yes, can you see the hard drive icon?
    Have you emptied the trash?

  • HP Officejet 6500A How do I scan a document with multiple pages into one file?

    HP Officejet 6500A Plus e-All-in-One Printer - E710n
    Windows 7 (64 bit)
    How do I scan a document with multiple pages into one file?  My old printer (psc 2110) asked after each scan if I wanted to scan another page.  At the end I had one pdf file with multiple pages.
    This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
    This question was solved.
    View Solution.

    Hi mpw101,
    If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • How do i take one layer with multiple selections...

    how do i take one layer with multiple selections and make those selections their own layer?

    Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
    Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style.

  • How can I separate one column into multiple column?

    How can I separate one column into multiple column?
    This is what I have:
    BUYER_ID ATTRIBUTE_NAME ATTRIBUTE_VALUE
    0001 PHONE_NUMBER 555-555-0001
    0001 EMAIL [email protected]
    0001 CURRENCY USD
    0002 PHONE_NUMBER 555-555-0002
    0002 EMAIL [email protected]
    0002 CURRENCY USD
    0003 PHONE_NUMBER 555-555-0003
    0003 EMAIL [email protected]
    0003 CURRENCY CAD
    This is what I would like to have:
    BUYER_ID PHONE_NUMBER EMAIL CURRENCY
    0001 555-555-0001 [email protected] USD
    0002 555-555-0002 [email protected] USD
    0003 555-555-0003 [email protected] CAD
    Any help would be greatly appreciated.

    This is another solution. Suppose your actual table's name is test(which has the redundant data). create a table like this:
    CREATE TABLE test2 (BUYER_ID number(10),PHONE_NUMBER varchar2(50),EMAIL varchar2(50),CURRENCY varchar2(50));
    then you will type this procedure:
    declare
    phone_number_v varchar2(50);
    EMAIL_v varchar2(50);
    CURRENCY_v varchar2(50);
    cursor my_test is select * from test;
    begin
    for my_test_curs in my_test loop
    select ATTRIBUTE_VALUE INTO phone_number_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='PHONE_NUMBER';
    select ATTRIBUTE_VALUE INTO EMAIL_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='EMAIL';
    select ATTRIBUTE_VALUE INTO CURRENCY_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='CURRENCY';
    INSERT INTO test2
    VALUES (my_test_curs.person_id,phone_number_v,EMAIL_v,CURRENCY_v);
    END LOOP;
    END;
    Then you will create your final table like this:
    create table final_table as select * from test2 where 1=2;
    After that write this code:
    INSERT ALL
    into final_table
    SELECT DISTINCT(BUYER_ID),PHONE_NUMBER,EMAIL,CURRENCY
    FROM TEST2;
    If you have a huge amount of data in your original table this solution may take a long time to do what you need.

Maybe you are looking for

  • How to install Oracle 11g R2 Express Edition in Arch 64?

    Does anybody know how to do that? The AUR website has a package for the beta version of Oracle 11g R2 Express Edition (https://aur.archlinux.org/packages.php?ID=48366), but somebody commented that it had some problem. After a few months, I think it's

  • Move movies folder in OSX 10.9.3

    Could I move my "movies" folder in OSX 10.9.3 to another internal sata disk? Unfortunately, my SSD disk has been full from the media of FCPX. But please, a reliable solution. Also, I do not want to move my whole "user" folder.

  • UnsatisfiedLinkError when using berkeley db in java

    Hi, I downloaded the Berkeley db version 5.1.19 and wanted to use java to access the db. However, when constructing the Environment object, an exception was thrown: Exception in thread "main" java.lang.UnsatisfiedLinkError: E:\java\Test\libdb_java51.

  • I want to create a bsp page help me

    i want to create a page in which the following should be there, 1.  A selection screen or a listbox for a pernr field from catsdb, 2.  according to that pernr no i want to display all that week transaction done by him in catsdb. help me please, thank

  • Sub-contract without BOM

    Hi How to create sub-contract without BOM..We want to create a subcontract for a customer return finished product .Even this Product have bom.We don’t want to send any components with the FP.We want to send some service materials with this FM.How to