HT4757 Can the digital camera RAW compatibility update 3.13 work for iPad?

Trying to transfer photos from my Nikon 3200 to iPad using the camera kit.  Can the digital camera RAW compatibility 3.13 update work for iPad?  Attempts to download it directly to iPad sends it to Evernote and then message comes up that synchronization failed.  Not a tech geek by any means so if you can help, please explain as simply as possible.  Thanks much.

45 views and no replies? Isn't there anyone that can answer if I need this update or not or is my question not clear? Does anyone else have a similar question relating to  the Digital Camera Raw compatibility update 3.11?

Similar Messages

  • HT4757 I have a Nikon CoolPix P80.  Am I correct that this is simply not a sophisticated enough model to be covered by the Digital Camera Raw Compatibility Updates?  It is never listed.  Thank you.

    I have a Nikon CoolPix P80.  Am I correct that this is simply not a sophisticated enough model to require the Digital Camera Raw Compatibility Updates?  It is never listed.  Thank you.

    Raw is the raw data from the camera sensor, before it is turned into a jpg.  From what I can tell looking at the specs for the P80, it does not have Raw mode. Therefore it will not show up in the compatibility table.
    http://www.nikonusa.com/Nikon-Products/Product-Archive/Compact-Digital-Cameras/2 6114/COOLPIX-P80.html#tab-ProductDetail-ProductTabs-TechSpecs
    Storage System
    JPEG: JPEG-baseline-compliant; can be selected from Size priority and Optimal quality
    AVI
    WAV

  • HT201071 I just downloaded the Digital Camera RAW Compatibility Update 5.01 to a brand new Aperture program and it WON'T install because it's not recognizing my NEW aperture program.

    I have the latest software and operating systems (Aperture, and OSX 10.9.1), and just downloaded the RAW update that Apple said to download, only to have my installation quit because it's saying I do NOT have the right Aperture program (I have the latest....just bought it yesterday).  Does anyone have a clue how to fix this, or did Apple put out that Nikon D610 is compatible when it really isn't? 

    All fixed!!!  My Aperture wasn't being recognized because it was in a folder.  OK, now I can use my camera with Aperture. 

  • Why can't I hide Digital Camera RAW Compatibility Update 6.01

    I don't have an SLR camera. I have an iPhone. Usually when I see RAW updates I right click them to hide the update because I don't need them.
    However when I right click and hide the Digital Camera RAW Compatibility Update 6.01 it doesn't go away.
    I finally just bit the bullet and updated my system but what a waste of space, time, bandwidth, etc.

    If nothing else from Mac App Store Support helps you, contact Apple Application Support.

  • Why i cannot update the digital camera RAW COMPATIBILITY UPDTE 5.0.4 AND ALWAYS ASK TO UPDATE IT WITHOUT UPDATING

    why i cannot update the digital camera RAW COMPATIBILITY UPDATE IN MY macbook pro with retina display and always ask me to update it without success

    toniak61 wrote:
    why i cannot update the digital camera RAW COMPATIBILITY UPDATE IN MY macbook pro with retina display and always ask me to update it without success
    Because something is wrong.  Most likely, either:
    (1) your Mac OS X Startup disk is damaged and you need to repair or reinstall OS X,
         - or -
    (2) you are not following the correct update workflow and should use the help from this Apple article. 
    For instance, if you are trying to update via  > Software Update..., restart Mac and download and install the Download Center version: Digital Camera RAW Compatibility Update 5.04.

  • Camera not in list for Digital Camera RAW Compatibility Update 3.11

    Do I need this update if my camera isn't in the list of supported cameras?

    45 views and no replies? Isn't there anyone that can answer if I need this update or not or is my question not clear? Does anyone else have a similar question relating to  the Digital Camera Raw compatibility update 3.11?

  • Digital Camera RAW Compatibility Update 2.2 - White Balance Temperature

    Prior to downloading the Digital Camera RAW Compatibility Update 2.2 I was importing RAW photos without a problem. Now all my photos are imported with a temperature of 2500K. I have a second computer on which this update hasn't been loaded and photos load with the proper temperature setting. When I load photos in Photoshop the temperature is indicated correctly. My DSLR is a fairly old Canon D60. Any suggestions?

    Mark:
    Welcome to the Apple Discussions. You can downgrade to 2.1 as described in this post:
    Source:http://discussions.apple.com/message.jspa?messageID=8142169#8142169
    Page Title: Apple - Support - Discussions - Can't import Canon RAW's (400D) to ...
    Date: Wednesday, September 24, 2008 7:26:47 PM
    This might work (from Clem who figured it out):
    Delete the file: System/Library/CoreServices/RawCamera.bundle then (re)install the previous version.
    Get the previous version here:
    http://www.apple.com/support/downloads/digitalcamerarawcompatibilityupdate21.htm l
    Restart your computer.
    Althought the fix was for correcting the problem of not being able to import at all it does give a means of downgrading to 2.1.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Problems since installing Digital Camera RAW Compatibility Update version 6.01

    I recently installed the Digital Camera RAW Compatibility Update version 6.01, however since updating my MacBook Pro (Retina, 15", Late 2013) isn't working right. My background is black (and I can't change it), I don't see the dock and I can't minimize any of my windows. HELP!!

    Reinstall OS X.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • Problem with Aperture 2 and Digital Camera Raw Compatability update 3.1

    Has anyone using Aperture 2 experienced problems with the Digital Camera Raw Compatability update 3.1. It may be purely coincidence but, since downloading this on March 3, I get the dreaded red screen and unsupported image format on my previously downloaded and edited RAW photos. I use a Pentax k-7 with which, once set up, I have had no problems until now!
    Please - any help would be very gratefully received

    That probably explains why any checks that your computer did to see if the Camera Raw update was okay to apply didn't stop it. You should probably contact Apple and explain that they broke something that was working fine previously.
    A few people have reported backing off Camera Raw 3.1 and going back to Camera Raw 3.0 for now. This note is one of the ones I've found describing how to do that, if you wish to try that. Or, you could head down the path Apple means to lead you on and upgrade to Aperture 3.
    Message was edited by: Ailish Eklof

  • Digital Camera Raw Compatibility update installation issues.

    I have attempted to install the Digital Camera Raw Compatibility update 6.01 but I am being asked over and over to restart my Mac Pro. The app store shows that I still need to install the update. 

    I was surprised to see it listed.
    I don't have a shiny new Leica  .  Will have to make do with my shiny new RX1R  .
    (Added:)
    I don't follow Medium-Format equipment, but a quick check tells me the Pentax 645D came out in 2010.
    Message was edited by: Kirby Krieger

  • Digital Camera RAW Compatibility Update 3.13

    Digital Camera Raw 3.13 just released
    Supported by Digital Camera RAW Compatibility Update 3.13
    Canon EOS-1D X
    Nikon D800E
    Nikon D3200
    Olympus OM-D E-M5
    Panasonic LUMIX DMC-GF5
    Sony Alpha SLT-A57

    Well done code cutters at Aperture.  At first glance the Digital Camera RAW Compatibility Update 3.13 seems to have fixed the problem.  The quickness of your action is appreciated!

  • "The update "Digital Camera Raw Compatibility Update" can't be saved."

    Hi I was going through software update and this message popped up "The update “Digital Camera Raw Compatibility Update” can’t be saved." How do I fix this? Thanks!

    ow88 wrote:
    I was going through software update and this message popped up "The update “Digital Camera Raw Compatibility Update” can’t be saved." How do I fix this?
    I don't have a direct answer for you, but if Software Update shows that update as "Digital Camera RAW Compatibility Update 2.6", you can download and install it yourself here:
    http://support.apple.com/kb/DL845

  • Digital Camera RAW Compatibility Update 3.12 and later can not be installed on OSX 10.6.8.

    Hi
    I bought a new Canon EOS 5D mark 3 and noticed that my MacBook Pro with OSX 10.6.8 can not handle the new raw files.
    Searching google shown that I need Digital Camera RAW Compatibility Update 3.12 or later.
    So I tried with 3.12, 3.13 and 3.14, but all failed during installation with error: "Dieses Update unterstützt nur Aperture 3 und iPhoto 9."
    Hmmm
    Checking iPhoto ...
    About IPHOT shows "Iphoto '09 version 8.1.2 (424)"
    So I've updated Iphoto with version 9.2.1 (which I found matching my OSX after stepping down from highest version down ..... Apple is here not really supporting users here .......)
    Unfortunately this is only an update.
    So I need to install first a newer Iphoto version.
    Iphoto 11 I can buy in the app store, but I can not install it on OS/X 10.6.8 .....
    Lost!
    How do I get my raw files of 5Dm3 visible in OSX 10.6.8 ???????
    Any help welcome
    Thx
    Wolfgang

    I maintain up to date my system, yet I have from time to time when I take RAW picture issues in iPhoto not reading them.  Today, looking for another issue I came across this update and I was hopping it would resolve my issues with the RAW photos from my Pentax K-30.
    The error:
    Installer quit unexpectedly.
    Click Reopen to open the app again. Click Report to see more detail information and send to Apple.
    Backtrace not available
    Unknown thread crashed with X86 Thread State (32-bit):
      eax: 0x00000055  ebx: 0x00000000  ecx: 0x00000000  edx: 0x00000000
      edi: 0x00000000  esi: 0x00000000  ebp: 0x00000000  esp: 0x00000000
       ss: 0x0000001f  efl: 0x00010203  eip: 0x8fe01030   cs: 0x00000017
       ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000000
      cr2: 0xfffffffc
    Binary images description not available...
    This laptop cannot be upgraded further without hindering its performance.  Hence, I need to keep the version of iPhoto that I currently have.
    Thank you for your response.

  • Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

    Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available.  I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual.  Sadly I just get a message saying it's not compatible with the operating system.  I've tried inserting the memory card into the mac to and it doesn't seem to see it.  Can anyone help please?

    Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
    What happens when you try to import photos using Image Capture or iPhoto?
    Can you take a screenshot of the error message?
    I always prefer and recommend using memory card import over using the camera.

  • Can't install Digital Camera Raw Compatibility Update 2.2

    Software Update wants to install Digital Camera Raw Compatibility Update 2.2, but it always fails, saying: "The update “Digital Camera Raw Compatibility Update” can’t be saved. You do not have appropriate access privileges. The Installer package has been moved to the Trash. To try again, open the package from the Finder."
    I've tried doing Repair Permissions in Disk Utility, but this has not helped. I'm using Mac OS X 10.5.5, all other recent updates have gone in fine.

    I had the same problem. Deleting the contents of the HD/library/Updates worked.
    Never the less I noticed that the permission set was different:
    Original permission set: admin R&W, admin R only, everyone R only.
    I also followed the Alias and found two files with the same permissions.
    Re-downloading (via software update) revealed a new permission set:
    (Me) R&W, Admin R&W, everyone Read only
    In both the alias and the two files downloaded. Note that (Me) denotes your user with administrator access.
    I believe that, since the update was downloaded automatically, the permissions were mismatched and instead of adding a system R&W privileges it added a second Admin Read only permission.
    Adding an administrator user with read and write permissions should solve the problem (as long as you authenticate as that particular administrator when prompted for intall authorization).
    Regards, Jaime.

Maybe you are looking for