HT4757 Does anyone have any idea of when they might support Sigma raw?

Does anyone have any idea of when they might support Sigma raw?

Hello:
No one here has any clue if or when. Apple is very "close-hold" about upcoming changes or enhancements.
I am not being critical, but the TOU prohibit any of us from speculating about future Apple hardware/software plans.
Barry

Similar Messages

TS3694 My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many than

My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.

Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy

My iPhone 3G will not turn on, but iTunes recognizes it to sync. Does anyone have any idea what might be going on? This was a sudden occurance-phone worked without issue before.

This afternoon I was used my iPhone 3G. I then put it aside (it was left on) for about an hour. When I went to use it again, nothing happens. The home button will not call up the lock screen. The lock button will not turn the phone on, off, or lock it. When I plug it into iTunes, it recognizes it to sync. Also if someone tries to call me it will ring on their end, but nothing on my end.
The iPhone is over two years old (purchased in April 2009), so it is out of warranty. Also, everything is up to date on the iPhone.
Does anyone have any idea what the issue might be?
Thank you in advance.
Shannon

What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?

? I get an Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?

You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800

I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

I already have, I contacted Orange yesterday and they said I will receive a text to confirm the registrastion for my new SIM Card, they said the text would arrive between 2 and 24 hours and its been over 24 hours with no text recieved

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

HT4859 does anyone have any idea how one can keep their data on iPad after leaving icloud as it appears that you loose all data when doing this...its killing me!!!

does anyone have any idea how one can keep their data on iPad after leaving icloud as it appears that you loose all data when doing this...its killing me!!!

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

My MacBook Pro is running very slow. I've run repair permissions without positive result. Does anyone have any ideas?

My MacBook Pro (2010) is runnign very slow. This came on all of a sudden. It opens, closes, reboots, etc., all much slower than ever before. I have used the repair disk permissions without any positive result. Does anyone have any ideas?

First, back up all data immediately, as your boot drive might be failing.
Take these steps when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

I am having trouble using reverb of any kind; it does not sound natural, but rather "pixilated." Does anyone have any ideas for a solution? I have used Silververb and Space Designer and am having the same problem...

I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!

This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way.

I cannot install iTunes updates as of today. Does anyone have any idea what changed with iTunes?

The question apparently needs to be typed in twice... good work. Here it is again:
I cannot install iTunes updates as of today. Does anyone have any idea what changed with iTunes?

Is this a distinct issue from the 42404?
If so, are you getting an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)

My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. Does anyone have any idea what could be wrong and how I could fix it? Thank you.

My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. I insert the DVD and wait for the player to start automatically but after 10 minutes, nothing is happening and it sounds like the disk has stopped spinning. I've now tried with four different DVDs (all store bought and so perfectly normal disks). The Mac doesn't eject the disk or anything it just doesn't seem to respond to it being there at all.
My main confusion is why this suddenly happened today when it was perfectly fine last week.
Does anyone have any idea what could be wrong and how I could fix it? Thank you.
Jinxe

Welcome to the Apple Support Communities
See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801

My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??

My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Whenever I am listening to itunes on my iphone and plug it in to my USB in my car radio, the song stops and instead the first alphabetical song is played. Does anyone have any ideas?!

Whenever I am listening to itunes on my iphone and plug it in to my USB in my car radio, the song stops and instead the first alphabetical song is played. It also does this when it's been plugged in the car, and then I remove it, and it reverts back to the first alphabetical song. This has only happened after I updated my phone. Does anyone have any ideas?!

I appreciate the commentary response but I'm not sure how this resolved my problem. The car was made before the iPhone coming out. By this fact, it would seem as if Apple has not made the product to compliment cars made before it.
Can anyone provide me steps to resolve this issue please?
Thanks,

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

I have installed a trial of Adobe illustrator on my macbook pro. I want to trace an image using the custom trace button but can't. Does anyone have any ideas how I could custom trace?

I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?

It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?

HT4757 Does anyone have any idea of when they might support Sigma raw?

Similar Messages

Maybe you are looking for