HT4759 getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook.  In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple.  My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud.  I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately.  Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

Similar Messages

  • HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

    I keep getting an windows installation error when installing icloud for windows 7.  I have tried installing manually without success.

    There is a very long way which is removing anything related to Apple including stuff in the registry.
    The short way is as follows. It worked for me.
    I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
    1. Remove the Apple account from Outlook.  In my case a me.com account.
    2. Disconnect the connection to ICloud in the control panel of version 3.1.
    REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
    3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
    4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
    and C\Program Files\Common Files \Apple.  My computer is 64 bits.
    5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud.  I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
    6. then I was able to install ICloud 4 immediately.  Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

  • Fatal error when installing icloud on windows 7 PC

    Get fatal error when trying to install icloud on Windows7 PC.

    Does this happen in a new user profile.. and what version of windows 64 or 32 bit ?

  • Can't get past OCX error when installing ODAC 11g on Windows Server 2003

    I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
    If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
    Thanks!
    Michael Young
    Latitude Geographics
    Victoria, BC

    Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
    So you say you checked instant client and you still got the error? That doesn't add up...
    Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
    Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
    You can do this as follows:
    1) Under the download links on OTN, go to the database download page.
    2) Download the Oracle Database client 11g for Microsoft Windows
    3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
    4) Close the installer
    5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
    6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
    This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
    Christian

  • I keep getting the 1935 error when installing lightroom

    Hello Adobe Community,
    From a few months I have been trying to install Adobe Lightroom but it just won't . Every time i get the 1935 error - [img]http://i.gyazo.com/35bc318f8b362b84784f40895527327a.png[/img]
    I have tried using a cmd command , disabling my anti-virus but still no luck . I hope someone can help me out!
    Best Regards
    Criss

    https://forums.adobe.com/search.jspa?q=error+1935+lightroom

  • I get a timeout error when installing flashplayer

    I use:
    HP Pavillion ze4500
    2Ghz Athlon Processor
    1GB Ram
    Windows XP service pack 3
    IE8
    Opera 12.15
    This morning, 2 things happened when I went to Youtube using IE8: I got a message saying IE8 was no longer supported on Youtube & that I needed the latest version of flashplayer installed (I've got a screenshot of that!). When I tried to get the lastest version, it wouldn't complete installation, the installer indicated "download timeout" (I've got screenshot!). I tried using one of the other download options offered on this site's help section and verified that I got the latest version installed (I have screenshot!). However, Youtube still gives the same message about needing flashplayer.
    Next, I tried using Opera. I got no message saying Opera wasn't supported and no message saying I needed flash player, but video was choppy when played. I tried downloading flashplayer using Opera, but still got a "download timeout".

    Download and run the offline installer(s) from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header

  • Getting the follwing error when installing CVP 7.01

    Trying to install CVP 7.01 the following error.....received [COULD_NOT_CREATE CERTIFICATE] while trying to setup keystore

    https://forums.adobe.com/search.jspa?q=error+1935+lightroom

  • Runtime error when installing reader on vista

    I had Reader 7.0.9 on my Vista computer and started getting errors. The box said I needed an update and when I tried to download I got a runtime error no error number. I decided to uninstall 7.0.9 and install the Reader for Vista. When I tried to do so the download would start where the previous download had errors and I would now receive an error. I can't download anything because of this and I know I uninstalled the previous version. Anyone have any ideas?

    Hi
    Hmmm without the exactly error message its not possible to say what could be wrong.
    I assume you have a clean Vista installation on your notebook and also the BIOS was updated.
    If not, do it!

  • Error when installing itunes to vista

    near the end of the installation i get an error message saying:
    "An error occured during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type=" 32" ,publiceKeyToken+"1fc8b3b9a1e18e3b"'process or Architecture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712."
    what do i do?

    HRESULT: 0x80073712
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up +en passant.+
    Go into your Windows update and try to check for new updates. Do they fail to install? If so, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712s, or a different error code? If they're different, what codes are you getting in Windows Update?

  • Red errors when installing 0ABC_CLASS

    Get many red errors when installing 0ABC_CLASS, one red error is "Table /BI0/OTABC_CLASS could not be activated"
    Note: 0ABC_CLASS does not contain any attribute, that means we don't have to find other InfoObjects which are attributes of 0ABC_CLASS to install to get rid of these red errors when installing 0ABC_CLASS.
    It's activated in a just installed BW 3.5, could it be any patch reason or some other reasons?
    Everyone's input is welcome!

    hey Eugene,
    Under SM21, these are system logs for today:
    Failed to write to file, error 0028
    > File: /usr/sap/QDW/DVEBMGS00/data/stat
    Perform rollback
    Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011 row=1
    > Include RSCOLL00 line 0534.
    Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
    > Short dump "051107 070016 qd1sbwdb DDIC " generated
    Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20051107070016qd1sbwdb DDIC 0001 )
    Perform rollback
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011
    Database error -289 at EXE
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011
    Database error -289 at EXE
    Failed to write to file, error 0028
    > File: /usr/sap/QDW/DVEBMGS00/data/stat
    Perform rollback
    Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011 row=1
    > Include RSCOLL00 line 0534.
    Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
    > Short dump "051107 080013 qd1sbwdb DDIC " generated
    Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20051107080013qd1sbwdb DDIC 0001 )
    Perform rollback

  • Errors When Installing 0PUR_C01

    Hi Friends,
                I get the follwoing error when Installing this cube.
    (1)Error when reading the update rules fr InfoCube 0DBDUNS_NUM, ISource 0DBDUNS_IMPORT_ATTR in vers.M
    (2)Transfer rules 0RF_ARTHIER_ACT BWDCLNT100
    (3) DataSource 0RF_ARTHIER_ACT for source system   BWDCLNT100 is not available.
    (4) Data source 0DBDUNS_IMPORT_ATTR not maintained
    I tried to Install them from RSA5 , but they are not availble either, PLease advice,
    Thanks in advance,

    HEy Smily,
    Try installing them from Business Content in RSA1.
    These update rules etc need to be installed in BW from business content.
    Also, data sources need to be installed from RSA5.
    hope it helps...
    Gaurav
    Assign points if it helps**

  • Hardlock error when installing in upgraded PC

    We have version 7.2 of DIAdem and get a hardlock error when installing on an upgrade laptop running Windows 2000.

    Hello
    I am having a Hardlock E-Y-E AHIZC TE9000 External Service, 2117.0102 Ver No 1 but when i install the driver and Program of Hardlock it says that CVIRTE.dll not found, in past it is working fine but when i upgrade my windows it is giving an error
    please help
    thanks

  • I am getting an unexpected error when trying to install iCloud on my PC

    I am trying to install iCloud on my PC and new iPhone 4S, but when my PC says there is an "unexpected error" when installing.

    Hi UniversityDesigner,
    Welcome to the Community!
    Please go through this thread: http://forums.adobe.com/message/5581753#5581753
    Thanks!
    Ankit

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

Maybe you are looking for

  • How do I reformat my external hard drive from operating on a mac to a PC?

    I have a Lacie 1TB hard drive that was initially formatted for a mac, but now I need to reformat it for a PC. I've read some reformatting forums, and I've gone on discmgmt.msc to assign a letter to the partition but I can't. It doesn't show up on my

  • How do I get Windows XP to forget wireless settings

    I've had a perfectly good wireless network for several years using a WRT54GS router wired to my dektop machine. My laptop has connected wirelessly with no problems. I was using WEP security. Recently I added a Logitech Squeezebox Duet to the network

  • Problem in saving the workbook as favourite

    Hi, I have a issue around saving the BEx reports as favourites. One of our user is not able to save his report in his favourites folder. He was able to do the same before,but now he can't do it anymore.He gets a pop up error message'WDTTREE - type mi

  • Sales order profit booking in another country

    Hi All I have a requirement for which, even after informing the customer that it is not possible to address in SAP, the customer wants us to give them solution. In spite of we giving them several suggestions to re-engineer the process, they want it t

  • I message does not working

    i have tried all the things they said andstill can not getit t wrk