HT4759 However, having a windows XP is not supported... how am I supposed to get the photo stream working on iCloud? I guess that is not a priority for Apple?

I have an iPod touch 4th generation, which is exactly what I wanted for a wifi supported multimedia device. I am trying to get the iCloud to work properly and despite of everything else working smoothly, I cannot seem to be able to get the Photo Stream working, in order to get the backup on iCloud. I tried to download the control panel and realised that it only supports the Vista SP2 and higher on Windows. Is there another way to get the settings on iCloud to include the photo stream?
Thank you.

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".  You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information.  This should be checked on a frequent basis  as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Similar Messages

  • HT201317 I am trying to upload photos from my Windows 7 machine, and I was told to drag them into the photo stream in the iCloud control panel. I have downloaded the control panel several times, but cannot find the place to upload the photos from my Windo

    I am trying to upload photos from my Windows 7 desktop, and was told to go to the iCloud control panel and drag the photos into the
    upload to photo stream icon. I have downloaded the contol panel several times and cannot find the icon to get this done.  HELP 

    If you're trying to add photos to photo stream on your PC, you drag them to your photo stream uploads folder (normally My Pictures\Photo Stream\Uploads).

  • HT5824 i have posted my pictures on I cloud, I am not getting the photo icon on my Icloud desk top computer, how can see my picture on I cloud on my desk top computer?

    I have posted picutre I took from my I phone, and have posted them on I cloud, I am unablet to view those picture on my
    I Cloud desk to computer,  the photos Icone is not present.

    If you delete photo stream photos from your phone they will be deleted from the my photo stream album on your PC.  Before doing that, be sure to copy or move them to a different folder on your computer.
    Deleting camera roll photos won't delete anything from your computer.  If you import them to your computer using your usb cable as explained here: http://support.apple.com/kb/HT4083, you will get an option to delete them from your phone after they are imported.

  • I'm looking at older photos but the sliders are from Lightroom 4 and not my current Lightroom 5 sliders.  How do I get the photos to work on Lightroom 5 editing?

    I was looking at some old photos from 2012 but when I clicked the files (.dng) instead of opening with the sliders for LR5, it opened sliders for I believe LR4.  How do I get those older photos to open under LR5 sliders and not older versions of LR?

    tma654 wrote:
    Sorry, not so good great at LR.  Do you have pics or something visual to show how this is done?...Do i have to switch each photo's process version or is there a way to do a whole batch of them?
    The quickest way to update just one photo is to click the lightning bolt icon under the histogram in the Develop module. This can be more convenient than scrolling all the way down to the Calibration tab.
    A quick way to update a whole batch of them is to select any number of them in Grid view, and then choose Photo > Develop Settings > Convert to Current Process. The AutoSync way works too, as long as you remember to turn it off immediately after you're done.
    Like JimHess suggests, I don't automatically convert them all at once, but on a case by case basis because they don't always look better after conversion. The benefits of the new process version can potentially make them look better, but you usually have to do a few more adjustments to get them there. If you don't have time to do that yet but you need to use the existing images soon, leave them in the old process version for now.

  • Where can I get Window's software for my Macbook Pro? I'm trying to run ARCview. However, it requires Windows. I'm trying Bootcamp. but, it isn't recognising the disk that I currently have.

    Where can I get Window's software for my Macbook Pro? I'm trying to run ARCview. However, it requires Windows. I'm trying Bootcamp. but, it isn't recognising the disk that I currently have.

    Maybe because it's not a 'genuine' retail version? Many OEM versions just don't work - and I've no idea which flavor of Win7 your friend downloaded. Obviously one that Boot Camp doesn't recognize. Best to just pony up the cash for a full retail version, of some flavor - and use it. You COULD, of course, download the 14-day trial version of Parallels Desktop and see if you can install Win7 as a virtual machine... it might or might not work. Boot Camp just isn't finding the resources it needs on the copy you have - try Parallels and if that doesn't work just purchase a retail (or student discounted) version.
    Clinton

  • My iPhone 5 is not catching up my website, although having a big screen... What does it need to get the pages in auto mobile queries converting?

    my iPhone 5 is not catching up my website, although having a big screen... What does it need to get the pages in auto mobile queries converting?

    You need to code your web site to recognize the mobile browser and send a page that's actually usable when it does.

  • I'm restoring a new iPad 2 (shattered the original).  Backed it up on the iCloud and have restored all apps, music, photo albums, etc.  However, the photo stream has not activated, so no photos have downloaded.  Photo Stream is fine on my Iphone and Mac.

    I'm restoring a new iPad 2 (shattered the original).  Backed it up on the iCloud and have restored all apps, music, photo albums, etc.  However, the photo stream has not activated, so no photos have downloaded.  Photo Stream is fine on my Iphone and Mac.

    Hello there, Tamghosh.
    The following Knowledge Base article provides some good steps to use for troubleshooting the issue you're describing:
    iCloud: Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    Particularly:
    I don't see photos in Photo Stream on my iOS device.
    Check the following:
    From your Home screen, tap Settings > iCloud > Photo Stream, and make sure the slider is set to the ON position.
    From the Home screen, tap Settings > Wi-Fi, make sure the slider is set to ON, and that your device is connected to a wireless network.
    Ensure that Camera app is closed on the device where you took the photo. Photo Stream will not upload photos from an iOS device until the Camera app is closed.
    Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • Compaq Presario R3000 how to get the sound to work with Windows 7 RC

    1) Download     SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe
    2) Run it, Create a directory  c:\ swsetup 
    3) Once all the Files are extracted DO NOT INSTALL
    4) Now Goto the Start Menu  Click on Devices and Printers, the Click on the Name you have called your  machine this will be marked will a yellow triangle as the sound driver windows 7 has install already is a realtek ac 97 which is not working, 
    5) Once your Machinename  you will see a general tab and and hardware tab select the hardware tab.
    6) Look for the Realtek ac 97  under the Device functions, select that and click properties,
    7) Now tab to the Driver, now click update driver,
    8) Select the option let me pick from a list of devices drivers, now click have disk
    9) Click on Browse  select the following location Swsetup\SP29586\SMAXWDM\W2K_XP and click on  smwdmCH6.inf 
    10)Now the Soundmax Driver should come up select ok and  next. Now your Sound will work
    This question was solved.
    View Solution.

    I am basicaly having the same problem with my labtop. I tried the following above and yet I still have not been able to get my sound to work. I have had some problems with my power and sound cards before but after I reinstalled windows my graphics card and sound card have not been working to their full potential. I thaught that it was a 64 bit graphics card, but now I am not so sure. I had to jostle the power cord in the back till I mannaged to find a perfect spot to keep the computer running. Before the reinstallation I had to put pressure on the left side of the computer to get the sound to work.. but even then it still came in and out.. "The sound that is." I can see the same driver in the codex menue and it is yellow but, what you stated above did not work.
    It says (Cannot continue the hardware update) The wizard cannot find a better match for your hardware than the software that you curently have installed. and then tells me to keep the current software. My sound Icon does not show up when I go to the settings.... I can't play diablo 2 on this no idea why... But my screen is choppy when I scroll through internet sites and it did not do that before. I have a 400mbs connection .... here is my computer information. :Compaq Presario R3000 Intel pent4  2.80ghz    2.80ghz       1.12GB ram and im running on windows xp2 professional.

  • Can iCloud photo stream to two iCloud ID's from a Windows PC

    My wife and I both have iPhones and she has an iPad2. We both want to set up photo streaming on our main windows PC. However I cannot see a way to enable iCloud streaming for both of us in the configuration of iCloud on the PC. It looks like the iCloud app on the PC will only stream from one apple id user at a time. Am I missing something or is this the way it is supposed to work?

    i have the same type of issue.  I have an iphone and my wife an ipod touch.  we use seperate accounts however we would both like to stream to the same pc.
    The only way i've found to do it so far is to log out of your cloud in the control panel and log in to hers.  This will disable your photo streaming until you log back out of hers and into yours.  you have to remember to check the photo streaming box.
    I wish someone would tell us how to leave 2 clouds open at the same time.  that would save a lt of time logging in and out.
    Hope this helps somewhat.  it's not convenient but at least you'll be able to get your pictures onto your pc.  you will not however be able to stream from one device to the next.  you will have to transfer the photos into the upload file to get them from say your iphone onto her ipad

  • I need to get the photo's synced via ITunes from my IPhone to my Windows PC

    Due to a hard drive failure I have lost all my data on my Windows Desktop.  I have synced most of the photo's on my IPhone 5S on iOS 8.1.2 via ITunes however it seems I cannot do the reversal to get the photo's from the IPhone to my Windows Laptop.  Has anyone got any suggestions to help??

    The only photos that you can put onto the drive of the computer from the phone are the ones in the Camera Roll. Those are done via the Import utility in Windows. Photos that have been synced to the iPhone via iTunes would have to be taken from the iPhone via a 3rd party utility. You cannot sync photos that have been synced to the phone back to a computer via iTunes. It does not work that way.
    There are a number of 3rd party utilities that you can use, but TouchCopy by Wide Angle Software is a good choice. I have used it before, and there is a free trail or a purchased alternative, depending on how much you need to do. That also will allow you to archive voicemail, SMS, and other data from the phone, if you did not have a backup of your iTunes library on the desktop. Remember the photos that were synced to the iPhone were done so in a reduced resolution, so you would not be getting them back in the same size and resolution as you synced them. Also understand, that if you did not have a backup, you will need to move music as well, or it will delete all of the music on the iPhone.

  • My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

    My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to  Icloud, Can any body guide, Why, I can not.

    Hi dip_kinu,
    I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
    Apple - My Apple ID: Find your Apple ID
    https://iforgot.apple.com/appleid
    Regards,
    - Brenden

  • In my itunes tab is images / photo disappeared. . can not get it back, so now I can not get pictures on my iphone??? I do not want to use the photo stream. there are others who have experienced this tab disappears

    in my itunes tab is images / photo disappeared. . can not get it back, so now I can not get pictures on my iphone??? I do not want to use the photo stream. there are others who have experienced this tab disappears

    Make the iTunes window wider.
    It is on the far right.

  • TS3989 My Photo Stream works and I have iCloud control panel installed. The photo stream sync is selected, but when I go to the my photo stream folder on my windows PC there are no photos in the file.

    My Photo Stream works and I have iCloud control panel installed. The photo stream sync is selected, but when I go to the my photo stream folder on my windows PC there are no photos in the file.

    mlvov,
    I did as you said and went to the icloud control panel on my Windows 8 Laptop to be sure I was looking at the correct folder for my photo stream.  All my "shared" albulms pushed to my Laptop and are up-to-date with the exception of the "photostream" album. If I create a "shared stream album" and place photo's in it on the phone; I can see the photos on my laptop. I dont get it. I had a iphone 4s and had zero isues and now with my new nifty iPhone 5s it doesent work.
    What am I not doing correctly.
    Thanks,
    iPhone, 5s, iOS 7.0.2

  • The Windows Ribbon Breaks After Selecting The Photo Stream Library

    Using the latest iCloud (2.1.2.8). The Windows File Explorer's Ribbon's buttons stop working after clicking on the Photo Stream library on the left.
    Specifically what breaks is ribbon's buttons.
    It is as easy as clolsing the file explorer window then opening a new one and the ribbon buttons like new folder, or rename start to work again until the minute I click on the Photo Stream library.

    Camera Roll is temporary storage for pics taken with the iphone.  You should be importing these pics to your computer regularly as you would with any digital camera.
    Photo Stream:
    iCloud: Photo Stream
    iCloud: Photo Stream FAQ
    Photo Library is where all pics synced from the computer to the iphone are accessed.
    You do not need internet access for Photo Library or Camera Roll

Maybe you are looking for

  • Error in L_TO_CREATE_MOVE_SU

    I am using a standard SAP function module to create a transfer Order for a storage unit. The function module is "L_TO_CREATE_MOVE_SU". The issue with this function module is that, if the user enters the wrong Storage bin for a fixed storage type, the

  • Video quality of Screen Captures

    I was wondering if anyone else was experiencing poor video quality when using the Screen Capture feature? My image quality is so poor that you can't read any of the text that appears on the screen. Is there anyway to tweak with the settings to improv

  • STMS related Query

    Can any one tell that from which table IMPORT History is displayed in option STMS->GOTO-IMPORT HiSTORY. I have one problem that in STMS  in Import history - > When log is displayed the date for a particular request is not same as DATE in table E070 f

  • Target Ledger Group / ASKBN

    Hi Gurus, I have several areas and among them a few one goes to a different ledger. Question: How can I set the system to avoid postings from leading area (01) to the different ledger? Is it possible at all? In the transaction "Define how depreciatio

  • Upgraded to OSX Mountain Lion. "Contacts" groups are a mess.

    I upgraded from OSX 10.6.8 to OSX 10.8.4. I did not think to back Contacts up and and my group email lists in Contacts are, for all intents and purposes, lost. I now have all kinds of information from other card files in the email lists and no way to