HT4759 I cant access my iDisk because of MobileMe
I cant access my iDisk because of MobileMe. I need to clean it out so that I can have more space for Adobe.
Welcome to the Apple Community.
iDisk was withdrawn many months back, anything you might have had in it has gone.
Similar Messages
-
i brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him....but i called to tmobile, they said this phone is not a stolen one,,thet told me to contrac apple.....is apple can unlock the icloud?
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
HT4759 i cant access my icloud account on my laptop
i cant access my icloud account on my laptop
Welcome to the Apple Support Communities
Have you tried to open System Preferences > iCloud, and login with your Apple ID? -
I cant access my ipod because of icloud.
Everytime i try to use my ipod it asks me for my icloud password. I cant remember what my password is and when i go to reset my password it resets my Apple ID. I cant do anything on my ipod because of this notice.
nicole kippers wrote:
when i go to reset my password it resets my Apple ID
Please clarify. That statement makes no logical sense.
If you don't remember your password, you can reset it at https://iforgot.apple.com -
I'm not able to use my mac book because i didnt set up a keychain before the new IOS was installed, I've created a keychain on my phone but as of yet have recieved no info as to how to get onto my macbook because irts continueously asking for a "keychain passcode" which apparently I dont have.... I've tried literally every passcode ive ever had for anything and nothing works... please help me :-*(
I responded to your first post and assumed that you didn't have a computer. If I was wrong, I apologize for misreading your question.
Did you totally erase the device and not restore from a backup? If you totally erased the device and set up as new, the passcode should not be on the device. -
i've got an iphone 5 and i have an old apple id which i was using on this phone i tried to put in my password but it kept telling me it was incorrect even though it was correct, the problem is i cannot remember my password for the email to try and change it through apple. Can you help?
Hello, benkitch.
Thank you for visiting Apple Support Communities.
You can reset your Apple ID password via the steps in the first article below. I would select the option to answer your security questions. If you do not have access to the email account or are not receiving the password reset link, see the second article.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
After upgrade asking meto connect to itunes, but it wont recognise the phone and telling me that I need to reset the phone to factory settings, but cannot get passed the upgrade telling me to connect to itunes to be able to reset the phone to factory settings, can anyone help
Is the phone not working?
Update Itunes to latest version,
Put phone in DFU mode and let it restore.
http://www.iclarified.com/entry/index.php?enid=1034 -
I cant access google marketplace because of previous owner gmail account password
I recently acquired this droid A956. It has a gmail account and password already associated with phone, of course I dont know the password, What can I do?
Sounds like the previous owner didn't factory reset the device:
Perform a Factory Data Reset (Device Powered On) - DROID 2 Global by Motorola -
I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT
If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699 -
i have tried to buy something from app store but it says that i cant buy the song because it says i have to activate the email but im at my home page for my email and i havent recived it. i have an @line email. how do i access this email.
Have you checked your email's spam folder to make sure an email from Apple has not been put in there?
-
Somebody can help me please. I can't access my count in gmail. I restart because the told me that my name or password is wrong. I can't set up my gmail count again. So is it necessary configure the smtp? If yes, I cant access this option. The message that I have is: the user name or password for imap.gmail.com is incorrect.
Ok, I've had thie issue with various email address on and off for aout a year now. I finally found a soulution:
Login to the Google account giving you problems;
Go to: https://accounts.google.com/DisplayUnlockCaptcha
Hit "Continue".
Go to Apple Mail and hit "Get Mail" for that account.
Repeat for each account continually asking for password. -
I am trying to move a file from a folder to another folder.
here is my code:
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Test Pictures");
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Test Test";
File.Move(folderContentNames[1], destinationFile);
updateListBoxFileName();
updateImageBox();
each time I hit the bolded underlined part I get that error message.
if you need anything else just ask.
Thanks in advance,
Thor OrbHi Thor,
If you want to move a file from a folder to another folder, I think you could get the sourcePath and TargetPath. The code below shows a simple demo:
string[] folders = Directory.GetFiles(@"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test");
string desFile =Path.Combine( @"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test - Copy\"+Path.GetFileName(folders[1]));
File.Move(folders[1], desFile);
In addition, the link below might be useful to you:
# How to: Copy, Delete, and Move Files and Folders (C# Programming Guide)
>> The process cannot access the file because it is being used by another process
The message seemed that the file was opened in other process. Did you operate the file with other code?
I think you could check if the files and the folders were opened, and review your codes if they were used in other places.
If you have any further questions, please feel free to post in this forum.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.
Ya, Thanks I figured about the path and destation. yes I am using the file in another area, the file is an image jpg and I am displaying it in a picture box. Now I have been doing a little research I see a command called Dispose() and this is suppose to
release the handle on the image, but I can seem to figure out have to use it correctly.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Collections;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.IO;
namespace Scanned_Picture_Ogranizer
public partial class Form1 : Form
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Scan Project Testing\Test Pictures", "*.jpg");
//List<string> folderContentList = folderContentNames.ToList();
private List<string> folderContentList = new List<string>();
Bitmap currentImage;
Bitmap placeHolder;
public Form1()
InitializeComponent();
convertingArrayToList();
startUpData();
string sourceFile = @"C:\Users\Jonah\OneDrive\My Programming Projects\Scanned Picture Organizer Project\Test Pictures";
string destinationFile = "";
private void moveButton_Click(object sender, EventArgs e)
private void startUpData()
//placeHolder = new Bitmap(folderContentList[0]);
//currentImage = (Bitmap)placeHolder.Clone();
// Image loadImage = new Bitmap(pictureClones[0]);
// currentFilePictureBox.Image = loadImage;
int numberOfFilesLeft = folderContentNames.Length;
foreach (string name in folderContentNames)
fileNamesListBox.Items.Add(name);
fileNameTextBox.Text = folderContentNames[0];
numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
///loadImage.Dispose();
//FileStream currentImage = new FileStream(folderContentList[0], FileMode.Open, FileAccess.Read, FileShare.ReadWrite);
private void convertingArrayToList()
foreach (string listName in folderContentNames)
folderContentList.Add(listName);
private void selectingImageFromListBox()
private void updateImageBox()
Bitmap currentImage = new Bitmap(folderContentList[0]);
currentFilePictureBox.Image = currentImage;
currentImage.Dispose();
private void updateListBoxFileName()
fileNamesListBox.Items.RemoveAt(0);
fileNameTextBox.Text = folderContentList[0];
// numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Scan Project Testing\Test Test\";
File.Move(folderContentList[0], destinationFile + System.IO.Path.GetFileName(folderContentList[0]));
folderContentList.RemoveAt(0);
updateImageBox();
updateListBoxFileName();
when I first start the program the first picture displays, but when I trigger historyPictureBox_Click(), it does that error again. Another things is that I already looked at that link and it didn't help.
I just super confused, I would like your help on this.
Thanks,
Thor Orb -
Why i cant access asa 8.4 thruogh asdm from outside interface ???
hi all ,
plz help e why i cant access asa asdm from outside interface
my puclic ip on outisde is :
x.x.55.34
i changed portf of asdm to 65000 because i have portforward ,
i tried to connect to my ip thriuogh asdm bu :
x.x.55.34
x.x.55.34:65000
but no luck ,
it succed if i try to connect locally
here is my sh run command :
====================================================
ASA5505#
ASA5505# sh run
: Saved
ASA Version 8.4(2)
hostname ASA5505
enable password qsddsEGCCSH encrypted
passwd 2KFsdsdbNIdI.2KYOU encrypted
names
interface Ethernet0/0
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 2
interface Vlan1
nameif ins
security-level 100
ip address 10.66.12.1 255.255.255.0
interface Vlan2
nameif outside
security-level 50
ip address x.x.55.34 255.255.255.248
boot system disk0:/asa842-k8.bin
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network localsubnet
subnet 10.66.12.0 255.255.255.0
description localsubnet
object network HTTP-Host
host 10.66.12.249
description web server
object network HTTPS-HOST
host 10.66.12.249
description Https
object network RDP-Host
host 10.66.12.122
description RDP host
object network citrix-host
host 10.66.12.249
description citrix
object service rdp
service tcp destination eq 3389
object service https
service tcp destination eq https
object service citrix
service tcp destination eq 2598
object service http
service tcp destination eq www
object network RDP1
host 10.66.12.249
object network HTTPS-Host
host 10.66.12.249
object network CITRIX-Host
host 10.66.12.249
object-group network RDP-REDIRECT
object-group network HTTP-REDIRECT
object-group network HTTPS-REDIRECT
object-group network CITRIX-ICA-HDX-REDIRECTION
object-group network CITRIX-ICA-SESSION-RELIABILITY-REDIRECTION
object-group service CITRIX-ICA-HDX
object-group service CITRIX-SR
object-group service RDP
object-group network MY-insideNET
network-object 10.66.12.0 255.255.255.0
access-list outside_in extended permit tcp any host 10.66.12.249 eq www
access-list outside_in extended permit tcp any host 10.66.12.249 eq https
access-list outside_in extended permit tcp any host 10.66.12.249 eq 2598
access-list outside_in extended permit tcp any host 10.66.12.122 eq 3389
access-list outside_in extended permit tcp any host 10.66.12.249 eq citrix-ica
access-list outside_in extended permit tcp any host x.x.55.34 eq 65000
access-list outside_in extended permit tcp any host x.x.55.34 eq https
access-list outside_in extended permit ip any any
pager lines 24
mtu ins 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
object network localsubnet
nat (ins,outside) dynamic interface
object network HTTP-Host
nat (ins,outside) static interface service tcp www www
object network RDP-Host
nat (ins,outside) static interface service tcp 3389 3389
object network HTTPS-Host
nat (ins,outside) static interface service tcp https https
object network CITRIX-Host
nat (ins,outside) static interface service tcp citrix-ica citrix-ica
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 62.109.55.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable 65000
http 10.66.12.0 255.255.255.0 ins
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet 0.0.0.0 0.0.0.0 outside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access outside
dhcpd address 10.66.12.160-10.66.12.180 ins
dhcpd dns 212.112.166.22 212.112.166.18 interface ins
dhcpd enable ins
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username test password P4ttSdddd3SV8TYp encrypted privilege 15
username ADMIN password 5dddd3ThngqY encrypted privilege 15
username drvirus password p03BtCddddryePSDf encrypted privilege 15
username cisco password edssdsdOAQcNEL encrypted privilege 15
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: endFor access over VPN you need:
management-access inside
and don't forget:
ssh inside
http inside
I'm guessing you forgot to grant ASDM (http/https) access to the IP addresses used by the VPN? Can you SSH? If not, that is your problem to solve first. -
i cant access firefox, everytime i try i get that windows can't find the file, i tried downloading it again but it still gave me the same message. the problem has nothign to do with my internet because it wonks on internet explorer and everythign is fine, my computer just can't access firefox for some reason. i tried uninstallign ti adn then installing it again, but that didnt work, i tried installing a different version and it still didnt work.
okay the exact message is" Windows cannot find 'C:\Program Files\Mozilla Forefox 4.0 Beta 1\firefox.exe'. make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
Nothing happens after i install is the "Launch Firefox now" checkbox set, the same message comes up.
i usually start firefox from the shortcut i have on my desktop but when this happened i thought that the shortcut is the problem, but i went to the Mozilla firefox folder and tried it from there, but it didnt work. i also tried downloading different versions of firefox but that didnt work either.can you tell me the solution to "windows cant find firefox" error. thanks.
-
i cant access my iphone 4s because i wiped the icloud account so now it wont reconize my apple id can anyone help me access my iphone
Hi chelcon2013,
You will need to change the Apple ID on your iPhone using the steps in this previous thread -
How do I update the Apple ID used on my iPhone?
https://discussions.apple.com/thread/5231672
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
How to start an 8.2 app in LabVIEW 2011
This has been a problem that I've been trying to deal with for the past week to no avail. In short: The 8.2s which worked on an XP machine were openned on a Windows 8 with LabVIEW 2011, made into an executable, put back on to the Windows XP to see i
-
9i to 10g Migration, RBO to CBO conversion
Hi All, We used to have 9.2.0.4.0 DB and our applications are tuned to RBO using 'rule' hints. Recently we migrated to 10gR2 (setting optimizer_hint = 'FIRST_ROWS_1') and we expected that the applications that are using 'rule' hint will be ignored or
-
HT4943 How to remove magazine from newstand? Please help
Please help in removing the magazines from newstand.
-
Am I supposed to have a VOL number or an email wit...
I ordered BT Infinity on Monday 31st March on the telephone. I have an activation date of 11th April. Although I have received a couple of emails from BT I seem to recall being told that one of the emails would confirm details/prices etc. This is not
-
Line upgrade resulted in no change at all to downl...
Hi first post and by no means Tech savvy so please bear with me. I recently received email from retail.migration stating that my line was being upgraded 20mbps and then that upgrade was complete. But from all I can gather there has been no change at