HT4759 My Ipad is disabled, what i need to do, pls help
My Ipad is disabled, pls help what to do
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.
Similar Messages
-
My ipad mini got disabled, what do i do? pls help!!!,
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My ipad is disabled what do i need to do
my ipad is disabled what do i need to do
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
I forgot my ipad password. My Ipad is disabled what can i do
I forgot my ipad password so my ipad is disabled what can I do to get it activated.
Entering your Wifi password will not - unless I'm missing something completely - disable your iPad. The only thing which will disable your iPad that I'm aware of is entering your passcode for iPad incorrectly multiple times.
If this is the case then please see: http://support.apple.com/kb/HT1212
If you have forgotten your password for your router the WPA or WPA2 key as it's also known as they you will need to log in to your Router and setup a new WPA(2) key.
Regards,
Steve -
i created a password to my iPad as a parental restriction, but my daughter played with it and pushed the wrong password 10 times my ipad was disabled, what should i do, since it wont sync with itunes becoz it will just say, cannot sync files becoz the device is password enabled, Please somebody helpme
If you are talking about the passcode that gains access to the iPad - you will have to restore your iPad in order to unlock it. You will want to use the last computer that you synced with so that you can recover all of your app data, settings, etc. this explains how to restore the iPad. At the end of the process restore from your backup as described.
http://support.apple.com/kb/HT1414
If iTunes will not let you restore that way, you may need to use recovery mode to restore, and you can read about that process here.
http://support.apple.com/kb/ht4097
IF - you are talking about a restrictions pass code that you put on the device to restrict content or downloading apps or something like that - you do not want to restore from the backup - because that backup will contain the passcode that you cannot remember and you will end up where you started. -
My ipad is disabled and I updated it, then the apple id and password were required I entered it but the itunes says this email cannot be used to unlock this ipad. So what can I do? anybody help me please.
is it the ipad that is disable or your Apple ID?
This article contains instructions on what to do if have forgotten your passcode or your device is disabled:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Contacting apple id support
http://www.apple.com/support/appleid/contact/ -
My ipad says "ipad is disabled" what should I do?
my ipad says "ipad is disabled" what should I do?
are the original owner? where did you purchase it?
-
Hi..my ipad tab is showing a message "ipad is disabled" what shall i do?
Hi..my ipad tab is showing a message "ipad is disabled" , what can be done to rectify this.
Connect the iPad to your computer's iTunes and you should be able to use that to reset the iPad back to factory defaults, after which you can restore or resync you content to it : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled.
-
HT4623 my ipad is disabled what will I do
my ipad is disabled what will I do?
Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
my iPad is disabled - connect to itunes... HELP please
You will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode for your computer's iTunes to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?
If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll. -
I got a problem in my ipad2 due to "icloud backup message". I can't open my unit and am worried that I can not use my ipad anymore. What can I do. Please help me. Thank you & GOD BLESS!
Try to reset it. just press hold the on/off botton (ignore the red slider) just hold it then the ipad is automatically reset. dont worry about your file, there nothing happen to it. Godbless.
-
When I tried to access into safari the ipod kicked me out back to the main screen, what is the problem? what i need to do? Help me please...!!!
Try:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Going to Settings>Safari and deleting cache, history and cookies. -
I cant make purchases on itunes store. Because i forgot my credit card info. I cant conplete billing and payment information. i totally forgot My card number and security code Because my card is on my mother and i cant contact her ryt now just to ask about that. I need to purchase products on my games now. What will i do?pls help me.i will thanks a lot. Pls reaponse guys. Tnx.
If you want to download a non-free item then you will either need a payment method - so you will either need to enter the credit card's details, or buy iTunes gift cards (if they are available in your country), either way you will need a method of payment.
-
How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can doHow to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do
Maybe you are looking for
-
Save and close excel file using C#.
I am not sure why I get the following error for the below code. Everything seems to work otherwise. Error found: System.Runtime.InteropServices.COMException (0x8002000B): Invalid index. (Exception from HRESULT: 0x8002000 B (DISP_E_BADINDEX)) Applica
-
I just rented a film using my apple TV and was then asked to enter a code - which I haven't been asked for in long time. I have forgotten the code. Any quick solutions to the problem?
-
dear all, I want to make package docbook-utils but have erroe . someone know why? Making all in HTML make[2]: Entering directory `/var/abs/local/docbook-utils/src/docbook-utils-0.6.14/doc/HTML' SGML_CATALOG_FILES=/etc/sgml/catalog SGML_SEARCH_PATH
-
1.4.2.04 Binary Compatible with 1.3.1.07?
OS is Solaris 7 on SPARC. Have an app built with 1.3.1.07. Building againt 1.4.2.04 is futile because of the import statement (package-less classes) issue. Attempted to run the app against JVM 1.4.2.04, and get JVM core dumps... log file (created by
-
Add new columns to flatfile connection
Hi, I have created a package and completed the development. Now, client is requesting to add few more columns to the target flatfile. I don't want to delete the connection and flat file destination components and re-create the both to reflect the new