HT4759 my ipad is locked up with a picture of a usb cable plugging into an Itunes cabl
my ipad locked up with an image of a usb cable plug pointing towards the iTunes logo
You need to place the iPad in recovery mode > iTunes: Restoring iOS software
Similar Messages
-
My ipad is locked up with the screen showing a picture of the usb port with an arrow to itunes.
Then connect your iPad to your computer and use iTunes to restore.
-
I Checked my network, it is working properly. I tried unplugging the Apple TV. It's still showing the USB.
That image means you need to do a restore. See Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support for more details.
You will need a USB cable with a micro-USB connector on one end. -
My grandsons new Apple refurbed 35g ipad keeps locking up with a black screen amd nothing else. I have reset it many times pressing the home and off buttons together but it keeps locking up. Help,please!
Thank you for trying to help. I followed your instructions, it took 6 hours to download, and then said it could not solve the problem (something to do with error 9?). It will have to go back to Apple - its only 3 days since it came out of the package and its very disappointing for him. Looks like I have to hang around in the Apple store in Plymouth all tomorrow until they can fix it, or will change it. Thanks for your help.
-
iPad is locked up with iCloud backup window. The ignore and settings buttons do nothing. It is like the iPad is locked up
If you are unable to cancel or power down, try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. -
my mother got an iPad air after she thought her old iPad was locked up with voice over anyway it says to hook to itunes i told it to fetch from the iCloud and it wont hook up to iTunes can someone help?
Punctuation would make your post a little easier to read and understand.
What do you mean it won't hook up to iTunes? you mean iTunes does not recognize the device? If that's what you mean, one of these might be helpful.
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X -
with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.
Having same issue here:
https://discussions.apple.com/message/19043181#19043181 -
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
i
SCREEN IS LOCKED WITH A PICTURE OF THE USB CABLE POINTING TO THE ITUNES SYMBOL
You need to put the device in recovery mode...
iPhone and iPod touch: Unable to update or restore -
I am locked out of my Iphone. It says to log into my itunes to unlock. I log into my itunes and it says to put my password into my phone but I can't it just goes to the emergency call, How do I unlock my phone?
Place the iPhone into Recovery mode. If successful, this will require restoring the iPhone with iTunes which is required anyway in this situation.
http://support.apple.com/kb/HT1808 -
HT1414 I Pad is frozen with a picture of a USB cable with an arrow pointing to an icon of itunes
IPAD is frozen with a picture of a USB cable with an arrow pointing to an icon of itunes? Can anyone suggest a fix
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
My iPad went black and shows a picture of the power source pointing to a iTunes emblem
When I went to install an update, my iPad went black and shows a picture of a power source next to an iTune emblem. I powered it off but when I power it back on, it shows the same thing.
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
When I try to turn on my ipad, all I get is a picture of an USB cord with anrrow pointing to an itunes icon. How can I fix this? pls help
Getting started
http://support.apple.com/kb/HT4053 -
I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Can anyone help me solve the problem. thanks
Its trying to tell you to connect it by usb to a computer to reflash a failed firmware flash
You should comply -
I updated to the latest version of Itunes and my Ipod touch froze up with a picture of a usb cable and the i tunes logo
Well the answer I gave you didn't solve the problem. Is the USB cable and the iTunes logo still on the iPod screen? You could start the "fixing process" by rebooting your computer, connect the iPod again, launch iTunes and see if anything happens.
This article may prove to be helpful. there are many steps that you can try to get the iPod running again.
http://support.apple.com/kb/ts1275
Message was edited by: Demo
Maybe you are looking for
-
Entourage, gmail, calander and syncing with a blackberry
HI all, i have a few questions here, that maybe someone could answer most of them, the blackberry one maybe not. I use entourage on my imac to get my email from my pop server. i have recently migrated from a regular pop server to gmail, which has ima
-
Logoff button is not working for end user application
Hi Team , Enterprise Portal : SAP Netweaver 7.0 We have updated Support pack from SP11 to SP21. and in End user application log-off tab is not working. ALthough when we login through Administrator user it is working fine Regards, Kamal
-
Hi, I'm trying to create my first simple webflow whcih will take the user to yahoo.html /hotmail.html depending on the link the user clicks.This is what i had done : 1. Create a new webApplication . i can access the default page by giving http://port
-
I have imported a DTS file in the .cpt file format but I'm unable to drag it over onto the main feature's timeline. The status is showing as green, but I'm unable to drop it onto the soundtrack timeline. Any suggestions?
-
I am not running nodes yet I am simply wondering if I should get another Mac and use nodes. I need some help I can't seem to get the big picture of nodes. 1. Does Logic have to be running on the node Mac? 2. If I enable node processing on a Logic aud