HT4759 What ((null)) mean on the top of my Apple Mail?

Does anybody know what ((null)) mean on the top of my Apple Mail? Has something to do with the outgoing smtp server...but what does it mean? Thanks in advance. Joeri

1. Try doing a reset(no data will be lost):
Disconnect the iPhone from any computer. Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears. Given your information, I suspect this won't work but try it anyway.
2. If that doesn't solve the issue, backup the device and restore it as new to isolate the issue to hardware failure.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

Similar Messages

  • What does the lock with a circle around it mean in the top right corner of my iPhone 5c

    What does the lock with a circle around it mean in the top right corner of my iPhone 5c

    It means that your screen rotation is locked. Open up the control center by sliding your finger up from the very bottom of the screen, and click on the screen rotation lock symbol, which is the same symbol you see on the status bar.

  • TS1503 Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

    Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

    Hi there AnthPy,
    You may find the troubleshooting steps in the article below helpful.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    -Griff W. 

  • I received a second iPad Air as a gift and sold on Ebay.  The person who bought it asked if is a Oem pad.  Not sure what that means.  The model part number is PF004LL/A

    I received a second iPad Air as a gift and sold on Ebay.  The person who bought it asked if is a Oem pad.  Not sure what that means.  The model part number is PF004LL/A.

    You can see the model number in Settings>General>About>Model. The model number has a two-letter code, a number and some more letters. The last part stands for the country/region. The first letter can be "F" (refurbished), "M" (normal retail), or "P" (personalized / engraved). For example MC605B is the model MC605 and B is for the region.
    What country does my device belong to?
    http://www.jbfaq.com/article.asp?id=63
     Cheers, Tom

  • After installing the Maverick upgrade my Apple Mail search and flags no longer work correctly?

    after installing the Maverick upgrade my Apple Mail search and flags no longer work correctly? I've already rebuilt the mailboxes with no change in the problem. What else can I do???

    Hi as2020,
    If you are having issues with Mail in Mavericks, you may want to make sure you have updated to the most recent release. You may find the following article helpful:
    OS X: About Mail Update for Mavericks
    http://support.apple.com/kb/HT6030
    Regards,
    - Brenden

  • How to avoid messages going automatically to the archive folder in Apple Mail?

    Dear list members, I've been using Apple Mail (version 7.3 (1878.6)) on my MacBook Pro 13" (9,2) (MacOS 10.9.4) for years to integrate my GMail, university, and other e-mail accounts in the imap mode. Since some weeks, Mail is behaving odd: some messages are sent automatically to the archive folder. That's quite annoying, as I have to move them manually back to the inbox folder, and sometimes I mess some messages. I did not change any config in Apple Mail or my e-mails servers. Could you please help me solve this problem? Thanks.

    The Archive folder in Apple Mail is linked to the All Mail "label" in Gmail. A label is treated like an IMAP folder, but it really isn't the same thing.
    In case you weren't aware, Gmail saves every email you send or receive inside the All Mail label. In Gmail, you can tag a file with multiple labels. So, a file that comes into Gmail appears in two places at once, the Inbox and All Mail. When you trash a file, the Inbox label is removed, but it still remains in All Mail.
    Previously, the All Mail label was hidden from you in Mail. Apple has been trying to make Mail work with Gmail, but that hasn't been going well.
    I have never had a problem, but I have both Gmail and Apple Mail set up such that any email I trash actually gets deleted and not stored on the Gmail server. I also have it set to no display the All Mail folder at all.  This may not be a fix as others have similar setups, but have problems with Gmail.
    This is how I set it up. I followed the original article, not the Part Deux article. However, you don't need to change the IMAP path prefixes or the label names in Gmail settings. I just have the part where I configured it to delete the emails when I trash them, and hid all the Labels I didn't care to see in IMAP.
    Remember, this may not resolve your problems. I don't know of another "fix."

  • I just reset my apple ID password and now all the imap folders in Apple Mail are greyed out. I can see the contents, but I don't get whay the folders are all greyed out. Can anyone help?

    I just reset my apple ID password and now all the imap folders in Apple Mail are greyed out. I can see the contents, but I don't get whay the folders are all greyed out. Can anyone help? Sorry for the long title on this message...

    Assuming this is an iCloud mail account, sign out of iCloud in its preference pane, then sign back in with the new password.

  • Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?

    Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • What does Checkmark at the top of the image mean?

    I have not figured out what a checkmark means when it shows up superimposed over an image, just under the top edge of the image and centered.
    Seems not related to image rating.
    Anybody can help?
    Peter

    This means that the checked image is the "pick" in a stack or within a group of versions. I find that Aperture puts that check mark there when you add adjustments to a version. To me, this means that Aperture assumes that because you are adding adjustments, it is probably better than the the non-adjusted version. You can of course change the "pick" by selecting another image and choosing the appropriate menu item (sorry I don't have Aperture on this computer right now, so I can't tell you which one) or you can click on that green box with a check mark in it if you have put in your toolbar.
    Hope this helps.
    Jeff
    Powerbook G4 12 inch 1.33, PowerMac G5 dual 2.7   Mac OS X (10.4.3)  

  • What do the two LEDs mean on the top of the NI 9881 CANopen module?

    I have looked through the documentation for the NI 9881, but have not found any mention of the meaning of the two LEDs. Does anyone know what they mean?
    Solved!
    Go to Solution.

    I don't think XNET and CANopen use the same LED definitions.
    The CANopen LED usage is documented in the CANopen spec, part 3 "Indicator specification".This should be available on the web.
    Key experpts:
    One LED shall be red and shall be labeled as ERR LED. This LED shall be called theerror LED
    The other LED shall be green and shall be called and labeled as RUN LED.
    Mandatory ERR LED table:
    ERR LED                   State                                   Description
    Off                             No error                               The device is in working condition
    Single flash                Warning limit reached            At least one of the error counters of the CAN controller has reached or exceeded the warning level
    Double flash                Error control event                A guard event (NMT-slave or NMTmaster) or a heartbeat event (heartbeat consumer) has occurred
    On                             Bus off                                The CAN controller is bus off
    Mandatory Run LED table:
    CAN Run LED                   State                                   Description
    Blinking                            PREOPERATIONAL              The device is in state PREOPERATIONAL
    Single flash                       STOPPED                            The device is in state STOPPED
    On                                   OPERATIONAL                      The device is in state OPERATIONAL

  • What's mean of the object ,tablename,fieldname in transaction bd52?

    in bd52,under the name of message type,have some item with name object ,tablename,fieldname,what is mean of them?is it as same as fields in idoc segment?why some message type have items and some have no?do they store value in transmission?
    Edited by: p y on May 10, 2008 11:23 AM

    hi,
    in ale's u hav a method called change pointers in which u can send some data which has to be changed in reciever system,so u hav to define the fields u want to send through change pointers method in BD52.
    if already exists no need to give,if not exist just give thm and save.
    ex: u hav sent a material from client 100 to 300.
    now u want to change basic uom(meins) for tht material thn u define [ material mara meins] in BD52 and save.
    thn u follow the remaining steps in change pointer method to send changes in uom from 100 to 300.
    reward if hlpful.

  • Creative bar what drops down from the top of the scr

    ok the bar thing at the top of the screen has vanished on me is there away to rest its possition as i think its gone off screen

    We're sorry to hear that Firefox is crashing when you open it. Please do the following to give us crash IDs that will help us understand more about the crash.
    #'''(OS X 10.6 or previous)''' Click the '''Finder''' icon in the dock. Your home folder will be selected. In the right side of the window, click the Library folder to open it. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.<br>'''(OS X 10.7 or above)''' Click the '''Finder''' icon in the dock. On the menu bar, click the '''Go''' menu, hold down the '''option''' or '''alt''' key and select '''Library'''. A window will open containing your Library folder. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.
    #Open the 5 most recent files with a text editor and copy the IDs.
    #Paste each ID with '''bp-''' into the reply window on the forums.
    Thanks in advance!
    You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

  • What is wrong with the top of my IMac screen?

    Can see something under my 27"IMac screen ,I'm pretty sure it is not a burn because it has depth and perspective to it when i look at my screen from a  different angle , it is almost like the pixels at the top of my screen ( under my status bar ) are transparent. can somebody hel

  • HT1420 How do I authorise my computer for iTunes when there is no "authorize this computer" or Advanced menu ?  When Apple say Store menu do they mean from the top of the store when logged in ?

    Where is the iTunes Store menu that has Authorize this Computer located and/or Advanced menu ? How do I authorise my computer for iTunes if I cannot find Authorize this Computer or Advanced menu ?  Thank you.

    It's done via the Store drop-down menu at the top of iTunes - if you are using iTunes 11 on a PC then pressing Alt-S should get the Store menu to appear e.g. (screenshot is from a Mac, but it should be similar on a PC) :

  • What's Up with the Netflix App on Apple TV?

    Am I the only one who absolutely hates the Netflix app on the Apple TV?
    I mean don't get me wrong, I love Air Play, my iTunes Library and the way the Apple TV just completes my ecosystem... but I HATE the netflix app on the Apple TV.
    My only solution to this problem right now has been to just use my laptop, hook up air play, and use the Netflix.com's system... But that's really not a good fix is it? I mean both the PS3 and XBOX360 have a legit, easy-to-use interface.. but the Apple TV's just feels stale...
    I've repeatedly gotten lost in the navigation of it all. The controls aren't exactly confusing.. but they're surely not "intuitive." I guess I just expected more out of an Apple App.
    Am I the only one who feels this way?

    I much prefer the ATV app. What is it that you have issues with?
    If you have feedback you are welcome to send it
    http://www.apple.com/feedback/

Maybe you are looking for

  • Not able to start Essbase Studion in 11.1.2

    Hi All, I installed 11.1.2 in my laptop and all the components are working fine except Essbase Studio. I am getting the following error when i start Essbase Studio Console Client in a Popup window. An Error occured please see the logfile. C:\Users\sv

  • Does UK hosting with Business Catalyst include VAT? Can it be paid for per year?

    I have been using Adobe Muse for about a year - LOVE IT! I'm starting to get professional business's as clients who obviously want quotes for their websites and hosting. I would like to stick with Business Catalyst for hosting...their online help sup

  • Is it possible to set up a script to auto render as new files appear in queue

    We have a system that creates images automatically and we need to be able to automatically convert and re-size them and move them to a new location. Some are needed as .gif animations but most are stills. I can set up a series of comps with the appro

  • Un able to edit the cash flow transaction in T,code  ftr_edit

    When we edit Treasury Cash flow transactions (FTR_EDIT) it can result in display mode. We have completed the TBB1 up to 28.02.2010. We want to edit the 28.03.2010(Installment repayment transaction). In that 28.03.2010 to 28.07.2010 is showing display

  • BAPI for VAT Calculation

    Hello Everybody, I just have one question and hope that somebody know the answer. Namely, I will need to have a BAPI which will calculate tax amount (VAT amount) based on (Net) Amount in the GL coding line. Are there maybe some BAPIs which can be use