HT4769 10.6.8 and FCP7 will FCP7 work with the Mavericks OS?

thanks in advance

Purchase Snow Leopard install disk.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Info regarding Windows
http://support.apple.com/kb/TS3648

Similar Messages

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

PSE13 trial version and it will not work with Windows 7

I have downloaded PSE13 trial version and it will not work with Windows 7

I have been using PSE 13 for 3 months with no problems. When I launch the Editor in PSE 13 this is what I get -
"Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
RAM 12.0GB
64 bit operating system
Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
Windows 7 SP1
Hope this helps.
Lynne

If i buy a Unlocked iphone 4s and use it in another country will it work with the countrys data Services that are local

If i buy a Unlocked iphone 4s and use it in another country, will it work with the countrys Local data Services

hi guys,
i recently bought a new iphone 4s factory unlocked. in order to avoid sim failures and invalid sim errors or No service errors, Each phone has to be unlocked by connecting it to the Itunes.
Kindly follow the below steps to avoid any SIM card conflicts
iPhone FULL Unlock - How it Works:
-Connect your iphone to itunes without any network sim inside and when connected click on the iphones name.
- Click Restore install latest version of iTunes on your Pc or Mac or click check for updates
- Let itunes Backup your phone and then Flash to the Latest Version.
- Now disconnect phone and reconnect after 10 seconds.
- Now Enter another network simcard that's not the same network its locked on to
- Connect phone to iTunes with not accepted (not valid) simcard
- Wait until iTunes detects the phone
- iTunes will display (Congratulations, Your iPhone is now unlocked)
- Phone Unlocked
- just follow the instructions about activating the Iphone.
and iphone is unlocked
NOTE : This is the only FULL LIFE TIME UNLOCK solution for Apple iPhone as the IMEI is registered as UNLOCKED in Apple database.
This solution should be used ONLY THOSE WHO BOUGHT FACTORY UNLOCKED iPHONE 4S.
Your phone will always be unlocked even after each new update of your phone firmware !
All reasons given like bad IMEI series, manufacturing defects etc blah blah are not logical as everything was tested before every sale.

My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync. But then the new info on my iPhone does not backup to iCloud. Is there a solution?

I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?

I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

HT4623 I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

Also i forgot to add after a night of searching how to turn the Epson Workforce 435 printer into Airprint friendly and not iPrint (which are 2 completely different things) i donwloaded a program called (AirPrint Activator) from HandyPrint. The link is below to download the software. Once i installed the application i set my printer to be shared over my Home Network (Wi-Fi Network). Once you have done that, open the AirPrint Activator application you have just downloaded, swtich it ON from OFF mode, and then you should easily see your printer name in my case EPSON Workforce 435 and then just close the application. Then go to your IOS Device like your iphone/ipad/ipod touch select a picture that you want to test print or even an attached PDF from your email, and select Print in the share button. You will then be prompted to select your printer. Your printer you automatically be recongised then just select print. And now you have a complete AirPrint ready printer with a Printer that doesnt even support the function. Im sure you can do this to all Wireless Printers, even if they came out before Apple AirPrint service launch.
And also if you still need guidance and a video to follow from just click the Youtube link below
http://www.youtube.com/watch?v=9r75m_VUr0E
Download AirPrint Activator Link
http://netputing.com/handyprint/
I hope that this helps your question and enjoy your day
Kind Regards
Ahmed

Will InDesign4 work with the newest MAC operating system -- OS10.9 I think.

Will InDesign4 work with the newest MAC operating system -- OS10.9 I think. My OS crashed and they have to wipe the computer to put on a new system. I don't want the latest system if it won't run CS4. I bought Creative Suite Cloud version and had nothing but problems with it and the system I was running. In fact all the problems with my computer started just after I put CS Cloud version on it.

Thanks for answering. I'll try to be more specific in my question.
Steve Werner <[email protected]> wrote:
Steve Werner created the discussion
"Will InDesign4 work with the newest MAC operating system -- OS10.9 I think."
To view the discussion, visit: https://forums.adobe.com/message/6587879#6587879
>

Labview 2010 Student Edition, will it work with the Labview FPGA module and Xilinx Spartan 3E??

Just as the title states.
I did a search here on compatibility, but I am coming up short with not much to show for it.
I have Labview 2010 student edition, 32bit and 64 bit. I am trying to do a Senior Design project for my undergrad, and I am having some issues.
I was able to download the Support for the Xilinx Spartan 3E and Labview FPGA.
I install it, it runs through the unzipping process, installs, and then mysteriously I cannot find it. I have looked through my programs list and it is not listed. I open both editions of LabView and I find ABSOLUTELY NOTHING indicating that either one has ANYTHING to do with FPGA.
Did I install it wrong? Or is it just not supported in the studend version of Labview???
Can someone help me, please?

M Boat wrote:
What about the trial version? Any chance of it being on there?
I think everything is available for download, and without activation it will be in trial mode and you have about a month (?) before the trial expires.
A trial version of the FPGA module is available for download here. I have no idea if it would work with the student version.
I would recommend to talk to your local NI sales representative for advice. Good luck.
LabVIEW Champion . Do more with less code and in less time .

If I buy an iPhone 5s in America will it work in Ireland , and will it work with the irish 4g

Hi I am going to America next week and want to buy an iPhone and I am wondering if an iPhone 5s bought in America will work with the irish 4g network when I come home? Please help

In general LTE will only work in the world region the device was designed for. And for it to work correctly all of the bands for your region must be supported by the device.
So assume that a North American iPhone will not work on LTE in Ireland, and decide if it is worth the difference in cost. Remembering that the prices you see advertised in the US are subsidized prices, and an unlocked phone costs much more than that. For example, a 5S 16 GB is $649, a 32 GB is $749, and a 64 GB is $849. To this you must add sales tax, typically 8% to 10% depending on where you buy in (NYC is 8.75%).
Then once you get it back to Ireland you must pay import duty and VAT, unless you smuggle it in. If you get caught smuggling it there will be a penalty on top of the duty and VAT, and they may even seize the phone. I have no idea what the chance of getting caught is, but if I were a customs inspector I would watch for things like that.
And finally, once you have it safely in Ireland if it ever needs service you will have to bring it back to the US.

Will it work with the 2010 MacBook Pro?

Can anyone tell me if the Apple DVI to ADC Adaptor will work with the 2010 MacBook Pro with DisplayPort using Apple's "Mini DisplayPort to DVI Adapter"?
Cheers,
Mitch

I'd suggest checking out the drives at OWC:
http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
They speak Mac and have excellent customer service.

Will Bootcamp work with the 3T fusion drive with the Mountain Lion update?

The notes on the update say it will work with the 3T drive but in typical minimalist fashion, Apple doesn't mention whether that includes the 3T fusion drive. Why can't they just explain things fully?
anyway, does anyone have an answer?

I installed 10.8.2 update today with my 2012 MBA. The details of the update include: Resolves a video issue with some VGA projectors when connected to certain Mac notebooks.
I tried using the MBA with a video projector and it found the correct resolution and connected with the projector automatically. Using detect displays in the disoplay preference pane wasn't even necessary.
I hope this is the fix I have been waiting for with the 2012 MBA.
Thank you Apple.
RC
(http://support.apple.com/kb/HT5460)

Will this work with the titanium ? (pic)

Hey guys planning to buy a new pioneer 89. I want to connect it to my titanium card. so i plan to connect it using analog RCA to mini jack.
What I want to know is will the BD/DVD multi in work with the titaniums analog ports?

im not experince with digital receivers.
Old games such as counter strike don't use digital 5.1 hence why im using analog inputs. i think analog will work well unless you or anyone can tell me another way i can emulate 5.1.

Will iCloud work with the original iPad?

Will iCloud work on the original 1st generation iPad?

Partially. Click here for more information; it's limited to the features compatible with iOS 5.1.1.
(107884)

Timing of text box will not appear. My text boxes stop working on slide 5 and they will not work for the remainder of the slide show.

Timing of text box not working. I get the first few slides to work and then on slide 5 my text boxes will not appear. And they do not appear for the rest of the slide show. Help anyone.

Text caption is timed to appear at 2 seconds, but you have a click box at 0sec. Its duration is very short, which means that I cannot see if there is a pause. I suspect this click box is pausing at the end of its timeline, which is at 0.3secs and the Text caption at 2 seconds will not appear before the user has clicked on that click box. The timeline is the core of Captivate, learn at least how to read it.
Tiny Timeline Tidbits - Captivate blog
If you want the green text caption 'Click on...' to appear right at the beginning of the slide, you have to check its Timing accordion: set it to start at 0 secs instead of 2 secs and extend its duration to the 'rest of the slide'.
I don't know what is in the Group. That group and the HIghlight box will disappear at 3 seconds. Or maybe the action that is triggered by the Clickbox is different from 'Continue'?
Lilybiri

I have a Cinema Display M8149. Will this work with the Mac mini?

I have the first generation of Cinema Display M8149 and it is still working beautifully! I need to upgrade now my first gen G4 and I am wondering if I buy a mini will the display work with it? If yes, do I need to buy the newest mini or could I buy a used or refurbished older mini and have the monitor still work. What adapter would I need? Thank you!

This
http://en.wikipedia.org/wiki/Apple_Cinema_Display
says the M8149 has the ACD connector (Apple Display Connector)
The ACD looks like:
http://en.wikipedia.org/wiki/Apple_Display_Connector

HT4769 10.6.8 and FCP7 will FCP7 work with the Mavericks OS?

Similar Messages

Maybe you are looking for