HT4796 link to migration assistant doesn't work. Where can I find it?

link to migration assistant doesn't work. Where can I find it?

Do you mean the link in the article to Apple Support Downloads? It works for me, now, and should take you here:
If not, try this one: http://support.apple.com/kb/DL1557
Sometimes an Apple server won't find the article you want immediately.

Similar Messages

HT4859 I recently had to restore my phone to factory settings - I did a back up first but now my phone doesn't work, where can I find my contacts? Where can I find the back up?

I recently had to restore my phone to factory settings - I did a back up first but now my phone doesn't work, where can I find my contacts? Where can I find the back up?

Did you try restoring your iCloud backup?

HT1420 need to autherize my computer. There is no link to do so on itunes. Where can I find a link?

I can't autherize my computer. There is no link on itunes to do so. Where can I find it?

The command is under the Store menu. If you're running iTunes 11 and don't see the menus, press Control-B or go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
Regards.

Junk mail filter in yosemite doesn't work. i can't find the 'mark as junk' selection or 'remove from previous recipients' which would help to filter out spam.

junk mail filter in yosemite doesn't work. from the flags, i can't find the 'mark as junk' selection. Formerly clicking on the email address in question would allow one to 'remove from previous recipients' which would help to filter out spam. I've adjusted all the settings under mail preferences, but that is not helping.

Hello Diane162,
Welcome to the Apple Support Communities!
I understand that you would like to be able to filter some of the junk mail that you are receiving in Mail. The attached article has a lot of great information on junk mail filtering, including how to mark as junk and adjust the junk filter.
Mail (Yosemite): Reduce junk mail in your inbox
Cheers,
Joe

My Live view doesn't work, it can't 'find my server'. But my server is connected and working. Why?

Hi,
I am confused as to why my live view can't connect to my server. However I have successfully connected to my server outside of the live view and uploaded my website.
I am new to dreamweaver, and I trying to learn to build a wordpress site from sractch. This is the error message I get:
The page "http://ftp.stoneinyrshoe.co.uk/index.php" was not loaded because Dreamweaver could not find the server "ftp.stoneinyrshoe.co.uk". Please make sure you are connected to the internet and the server name is correct.
When I direct Live view (testing) to use the same site details as my main connection, it still doesn;t work.
Any advice would be much appreciated.
Thanks

That's an FTP address you are trying to connect do. That's different from the regular HTTP protocol. From the address you posted I'm wondering if you have installed MAMP/WAMP for a local server on your machine or if this testing server is separate from the actual domain serving the pages. Can you explain your setup a little more?

Migration Assistant on the Source computer can't find the target on my WiFi network

I am trying copy stuff from an old MacBook Air to a new one.
Both computers are running OSX 10.9.4 and Migration Assistant v5 (08/24/2013)
I can ping both computers.
But, when after step 4 of "OS X: How to migrate data from another Mac using Mavericks" the source computer never finds the target. It just sits there "looking for other computers".
For what it's worth the if I hit continue on target computer it does see the source.
Help

Back up the old system with Time Machine or Disk Utility and try migrating from the backup.

Number pad doesn't work, and can't find Num Lock button

My number pad has stopped working. I looked in the User Guide which says I have a Num Lock button, but I don't. Where is it located. Thank you.

Solved - Never mind, I found it. I don't know why I couldn't find it last night. I'd looked for it before without finding it. For some reason, there it was this morning - where it should have been. I guess the computer elf came in an installed it. Thanks to anyone who may have thought of responding.

I have a 64 Bit Linux system and I need to download a 32 bit firefox version to get Flashplayer to work, where can I find the different versions for download?

I've extracted the LibFlashplayer.so file & copied to /usr/lib64/firefox/plugins directory and restarted Firefox.....also copied to /usr/lib/firefox/plugins directory and nothing works..... I even rebooted, no help.

Make sure that the name is correct: libflashplayer.so

I have FF 21 and i want to migrate to FF24 only. Where can I find setup for FF 24?

I want to migrate from FF21 to FF24. But i am unable to find setup for FF24.

If you really want to use Firefox 24 and not the current Firefox 25 release then at least install the Firefox 24.1.0 ESR version to get security updates.
Firefox 24.1.0 ESR:
*http://www.mozilla.org/en-US/firefox/organizations/all.html
*http://www.mozilla.org/en-US/firefox/24.1.0/releasenotes/
*http://www.mozilla.org/en-US/firefox/24.1.0/system-requirements/

HT204350 Migration Assistant is NOT working

Migration Assistant is NOT working - Have tried from from a hard disk and using the Thunderbolt cable. Keeps Looking for Source.
Any ideas? I really want to more on to my new Mac.

That the Migration Assistant doesn't work is a KNOWN ISSUE. Last week I got a new iMac and the old and new couldn't find one another. I called tech support 3 times and spent I don't know how long on the phone. They finally suggested I take them both to an Apple store, which I did today. The Genius knew all about it - said it's a known issue. To "resolve" it he started the old iMac in "disk mode" and then the new one could see it, but that wasn't an adequate fix: After spending over an hour moving the files, they wouldn't have been in their proper folders. I would have had to manually file 6 years worth of pics and files! NFW - I returned the new computer and will make do with my old one until Apple gets this right.

Where can I find the link to download Adobe Photoshop Elements 12?

Good Day,
I bought Adobe Photoshop Elements 12 but am unable to insert the disks into my laptop as I do not have a disk drive. I tried downloading, however I am unable to find Adobe Photoshop Elements 12. I tried downloading elements 13 and inserting my serial number, but it did not work.Where can I find the link to download elements 12?
Kind regards,
Catherine

PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

Migration Assistant doesn't allow me to choose what drive.

Well, I got my new computer. I tried to migrate a drive from my old computer using Migration Assistant. and it doesn't allow me to choose what drive.
In my old computer I have 5 drives. The original HD (was 10GB, was replaced last year by a 40 GB) and on my Hitachi 250 GB drive that I added 2 years ago, there's a partition with 4 drives.
I wanted to migrate one particular drive from there (called Current work).
First I did a mistake. I connected both computer via the firewire in the afternoon when there was enough daylight so I don't have to do it later at night (the computers are under the table.) I thought it's OK since I'm not pushing any button yet ("migrate now", "transfer", and such).
I turned on the new computer and a message appeared: you must restart.
That's strange, I said to myself. it's a brand new computer. Usually It says that when there's a problem, but OK I restart and when it's back on, I see that my external drive (Neptune from OWC which was still hooked up in the old computer) is on the desktop. And it took just a few seconds. I open it and all the files, etc. are there. It did copy the whole external drive !
I'm not an computer expert but I believe the Mac Pro did notice that's there's a firewire hooked up and then, without asking me, migrated the external drive and that's why it asked me to restart. I would have prefer if it tells me "restart so migration can begin".
I don't mind for now that my external drive is on my new computer. I can always erase it if I don't want it. It is still external right ? so it doesn't intrude on the 640 GB of my HD so I just keep it.
But it also copied/migrate Mac HD 40 GB which is full of OS 9 and I almost never use it anymore. I don't want it coz it has applications and they advise not to migrate applications (certainly not applications with issues).
They say migrate folders, settings but re-install applications.
And it migrated also another drive called "Scratch" which has only personal date no system, no software.
Anyway, I erased everything and re-installed using the Install disk that came with the computer.
BTW, what they say in the manual (p. 90: Re-installing the software that came with your Mac Pro) is different than what really happens.
They say insert disk, double- click on Install and then click options in the "Select a destination" pane of the installer. Then click "erase and install" Problem is: there's no "Select a destination" pane. Or any options.
I had to go to Disk utility and erase, then re-install OS X.
Then re-install the applications using "Install applications" (the other disc that came with the computer. )
OK, I did that. Then while everything is empty, new, I used Migration Assistant.
Now here is the reason why I post this.
They say hold T key until you see a firewire icon then select a drive. I can't see when there's an icon coz I have only one monitor, so I just hold and hold the T-key and turn on the old computer. The screen shows "waiting for you other computer to restart" 2 min.... 5 min... 7 min. Nothing happens. I stop holding.
I look at the desktop and I see that the icon of the old 40 GIG Mac HD is there. (and I believe with a firewire logo, but not sure about that.)
I have the impression that if I kept the T-key longer it would have migrate the other drives as well.
They say keep the T-key down until you see the firewire (then let go I suppose. As I said I don't see what's going on on the desktop of my old computer so I kept the T-key for a few minutes. I also tried another time to let go after 1-2 min. No difference.
I shut down the new comp. and the old computer screen appears automatically (both are connected to the monitor; the old with analog port, the new with digital port) and sure enough the firewire icon is moving on the screen.
I go back to the new computer and put the old 40 GIG Mac HD in the trash. Actually, when it touched the trash, I just saw an eject icon and the drive disappear. Did not go in the trash which is empty. So I guess I ejected, not sure what's the difference but I looked for it to see if it's anywhere in the computer. Could not find it. Not in the HD, not in the desktop. Good, I don't want it there. Is it hidden somewhere ?
So I tried again but wondering perhaps the old computer should RESTART not turn on (it was off) so now I wait until it's on, then push restart. I hear the gong when it shuts off but that's it, no other gong when it comes back. I keep the T-key. But nothing happened. Just see the message "waiting for your other computer to restart"
PS: BTW Target mode (which seems to me similar to Migrating with "Migration Assistant") will not work for me because it must be SATA, mine is ATA.
I didn't try but read that it has to be SATA.
Is it the same ? In migrating they say hold down the T-key (T for target)
And how come that my 40GB HD which is ATA did migrate (not that I wanted too but still).
Also, this drive ("Current Work") that I want to migrate to the new computer is in my external drive. Can't I just drag it ? If it has only personal data, files and folders I know I can, but It has system (OS X) and applications. It's the one I use and boot on, in my old G4 but I want to transfer Files and folders and settings, so the new computer will know what are my Safari preferences, Automatic fill-in, and perhaps it will move my iTunes music Library too ?
Basically everything except applications. Although I would like my Nikon scanner to be in the new computer as well as the LaCie DVD recorder but I guess I can do that later, separately ?
What are the settings or info I need ? Because if it's just Safari preferences, automatic fill-in and other such small thing, it might be better to just do it again in the new comp and forget about the hassle of migrating.

Try getting into Windows and then plugging in the Superdrive. The drive will only be attached to one OS or the other, not both.

Stumped! Migration Assistant won't work - need to setup new mac asap!

OK, I've been trying to transfer files from my iMac to my Macbook for three days - no luck.
I did a wipe and install on the macbook first. But then Migration Assistant wouldn't work b/c it said the machine i was transferring do had an older OS than the iMac. SO, I reinstalled Leopard on the iMac - but now All my files are in the "Previous Systems" Folder - so when I try to use Migration Assistant - it calculates my transfer files at 0 KB.
Same thing happens when I try it from my latest Time Machine Back up.
I've tried migration assistant with firewire, ethernet and Time Machine. etc, but no luck.
Now, I'm just copying all my files over - but I NEED to have all my mail msgs and applications transferred!
Any suggestions I feel like I've tried everything - I've read many many articles here but I'm getting frustrated and tired.
thanks in advance!
http://discussions.apple.com/profile.jspa?userID=262360

scarchord wrote:
OK, I've been trying to transfer files from my iMac to my Macbook for three days - no luck.
I did a wipe and install on the macbook first. But then Migration Assistant wouldn't work b/c it said the machine i was transferring do had an older OS than the iMac. SO, I reinstalled Leopard on the iMac - but now All my files are in the "Previous Systems" Folder - so when I try to use Migration Assistant - it calculates my transfer files at 0 KB.
Same thing happens when I try it from my latest Time Machine Back up.
What version of OSX is that backup?
And what version is on your MacBook?
It sounds like the iMac and/or backups are on Snow Leopard, and the MacBook is on Leopard. If so, you can't transfer from a newer "major" version of OSX to an older one (but you can transfer from, say, 10.6.6 to 10.6.4, although some Apple apps may not be happy with older versions of their data files).
If the backups are Snow Leopard, update the MacBook to Snow Leopard and do the transfer from the backups, either via +Setup Assistant+ or +Migration Assistant.+ See [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of the +Snow Leopard > Installation and Setup+ forum).
The other article is for transferring from a PPC Mac to Leopard or early versions of Snow Leopard.

HT4889 Migration assistant doesn't see my 3TB Time machine it just keeps looking for other computers

I just did a clean install of Mountain Lion on my iMac and Migration Assistant doesn't seem to see my 3TB Time Machine. It continuously looks for other computers, and nothing else. I know the files work because I loaded it on my other MBP and it sees them just fine? am I just inpatient or is something wrong?

This happened to me after hard drive replacement under the Seagate Drive Recall at the local Apple Store. Here's what I learned from the process:
I Wagged the Mac home, fired it up (with naked OS installed at the Apple Store), and it wouldn't see my Time Machine drive with Setup Assistant - not on firewire 800 nor USB. Just a grey spinner that lasts forever. When I try just continuing anyway, it offers me something that looks plausible, but then puts up a dialog about duplicate user name, and no matter what I enter, it always says "that user already exists". So I think - maybe Migration Assistant. Complete the setup, create an account, watch the nice welcome movie. BAM - there's my Time Machine drive on the desktop. OK - it has to work . . . but no. Same behavior in Migration Assistant, plus the new OS offers to start making backups on my Time Machine disk - it's not recognizing it at all.
So - back to the Apple Store - let the genius figure it out. It turns out there are multiple problems. First, the "genius" who imaged my new machine picked 10.7.2 but my machine had 10.7.5 - turns out, it's not enough just to have right cat. Even a point release older OS may not recognize a newer Time Machine drive. The guy at the desk said "We have images of everything but the 10.7.2 has free iLife in it, so they like to use that one". What the heck? They don't image what you had originally as a matter of sane process?
Having figured that out, we re-image 10.7.5 at the store thinking we've fixed it. But no - Setup Assistant still won't see the Time Machine drive. Not on USB, not on Firewire. Not in a box, not with a fox.
So here's the second trick - newer machines have a recovery partion. see: http://www.apple.com/osx/recovery/ Boot with the option key held down, pick that partition, then you'll get a "system restore" option, to restore your whole system from a Time Machine backup. My drive was recognized by the recovery partition restore process when neither Setup nor Migration Assistant would. Obviously, there's something broken in Setup/Migration Assistant.
Takeaway:
- if you're getting a drive replaced by Apple, make sure they image *exactly* the same OS
- if Setup Assistant fails, use the recovery partition for system restore
- Use Recovery Disk Assistant http://support.apple.com/kb/DL1433 NOW to make yourself a recovery thumb drive just in case. With Apple's new "no media" approach to the OS, you're hosed without it.

Linked column with # sign doesn't work in report results

I have a 2 page query situation, whereas in the 1st page I have a wildcard query to find a product number.
This product number is set-up as link to run a report which opens in another page.
(Type is a STRING.)
Everything works fine unless the product number starts with the # sign.
I can run a report using this in a non-linked page, but it doesn't work in the linked page...?
Simple queries
Page 1
select
from
Products
WHERE (((upper(TOP_ITEM) like upper(:P1_SEARCH)||'%')))
and :P1_SEARCH is not null
(Link on Top Item - :P2_Search)
Page 2
select
from
Products
where Top_Item = :P2_Search
(This works fine if I enter the #[Product] into the text field)
Link doesn't work...?

You need to escape the "#" character in the product no and generate the link's HTML code in report #1 directly within the SQL query.
select ..
,'<a href="f?p=REPLACE(product_number,'#',''%23)
,'<a href="f?p=' || :APP_ID || ':200:' || :APP_SESSION || '::NO::P200_PRODUCT_NUMBER:' || REPLACE(product_number,'#','%23') || '"> Link</a>' product_number_link
FROM ..
{code}
<i> 200 is report #2's page
P200_PRODUCT_NUMBER is report #2's page item which is set on redirecting to that page.
Product_number is the column name of column with '#' characters
Change display type of product_number_link column to "standard report type"</i>

HT4796 link to migration assistant doesn't work. Where can I find it?

Similar Messages

Maybe you are looking for