HT4799 power went out in the middle of upgrading software.  now nothing

I was in the middle of up grading soft ware on my apple tv unit.  With about a minite to go the power went off. Now there is no program on the unit.  Any way to reprogram?

Connect the device to a computer running iTunes via a microUSB cable and restore.

Similar Messages

  • Power went out in the middle of my update. Now it is stuck at one minute

    What should I do now

    Connect the device to a computer running iTunes via a microUSB cable and restore.

  • My mac went dead in the middle of working-no power light,no start up

    hi,
    my mac just went out like it was unplugged in the middle of me working. now there is no powerlight and it will not start back up. what can i do to troubleshoot? help!! i've checked all cables and all seem to be ok.
    thanks.

    Hi. You could try disconnecting everything except the display, and wired keyboard and mouse, and resetting the PMU/SMU
    http://docs.info.apple.com/article.html?artnum=300341
    If your G5 has a button as shown in the photo at the bottom of the page, earth/ground yourself by keeping one hand on the G5 casing as you press the button(once, firmly); you may not have to remove the Intake fan bracket to get at the button.
    If it still doesn't start up - and you are certain the mains power is good to the G5 - Is there a 'relay click' from the PSU when you plug the mains lead/power cord back in? One User in the Forum managed to recover from a similar problem by wiggling the mains connector in the socket at the back of the G5.
    It has been known for unlikely steps such as replacing the battery, and re-seating the video card in its slot (and re-seating RAM) to resurrect a former G5.
    If you have a "Late 2005" dual-core 2.3
    http://support.apple.com/specs/powermac/PowerMac_G5_Late2005.html
    this 'extension' may apply
    http://www.apple.com/support/powermac/powersupply/repairextension/
    If it does Startup you may be able to find what caused it by checking Utilities > Console > Logs > system.log - working back from the current Startup entries.
    You may wish to run Disk Utility > Verify Disk on the boot drive, in case there is directory damage.
    Good Luck.

  • The power went out and when it returned the network name and password was lost.  I can see the network in my connections and connect to it.  How do I get it back to the orginal name and password.  I have an HP laptop

    The power went out and when it returned the network name and password was lost.  I can see the network in my connections and connect to it.  How do I get it back to the orginal name and password? I have an HP laptop. 

    Chances are, there was a signficant power surge or voltage fluctuation just before the power went out. This type of thing can cause the AirPort Extreme to reset back to default settings.
    If this occurs, your only option is re-configure the device again, just as you did originally.
    In order to improve your chances this next time this happens, (especially if you live in an area where thunderstorms are severe), a good quality surge suppressor / voltage limiting power strip will really help, and may save you the entire device or a nearby computer next time something like this occurs.

  • The power went out while installing the software update..!

    The power went out while installing the new Apple TV software update..! Now the LED flashes all the time, shows the apple logo and never boots.

    I've already tried to restart with no result. I bought the microUSB cable and iTunes recognized it. I restored the firmware with success but when i disconect the usb cable the AppleTV is dead. It doesn't respond (LED is off) when i connect the power or when i use the remote. Now the LED flashes only when i connect it with the microUSB cable. I tried several times to restore the firmware with success but when i disconnect the microUSB, AppleTV seems dead.

  • My light is flashing on my apple tv after the power went out how do i fix the problem

    my light is flashing on my apple tv the power went out then when it came back on it began flossing what do i do

    See Apple TV: About the status light - Apple Support

  • The power went out during a thunderstorm when i was syncing my ipod, now all my pictures are gone? help!

    the power went out during a thunderstorm when i was syncing my ipod, now all my pictures are gone? help!

    bechosken wrote:
    My friend wanted to get some music off my itunes
    This is called "stealing". You do not have the legal right to give her the music you have in your iTunes library unless you are the copyright holder.
    when syncing it it said she had to update her phone software first
    That's not quite what it said.  Someone should have paid more attention to the great big warning about the possibility of losing data if the phone wasn't backed up.
    We cannot find her new photos. Please help and there was 100 new pics. Is there any way we can get them back. I already have the program Asoftech - but it doesnt seem to register the iphone only C and D drive. Please help!
    It restored the backup that was made on your computer 6 months ago, which did not contain those photos. You're wasting your time trying to find them on the phone. They don't exist.
    Hopefully, your friend syncs her phone to her own computer on a regular basis. She needs to plug her phone into her computer and restore it from her last backup. That will restore it to the state it was in when the backup was made.
    She also needs to get in the habit of extracting the photos on a regular basis, like she would from any other digital camera.

  • I WAS USING IPHOTO AND MY POWER WENT OUT. WHEN I TURNED THE IMAC ON I COULD NOT OPEN IPHOTO! JUST KEEPS AKING TO RELAUNCH. TRIED TO PUT RECOVEERIND DISC IN BUT STILL NOTHING!

    I WAS USING IPHOTO AND THE POWER WENT OUT. WHEN I TURNED IMAC BACK ON IPHOTO WOULD NOT OPEN, JUST KEPT ASKING TO RELAUNCH. NOTHING HAPPENS WHEN I RELAUNCH. I TRIED PUTTING THE RECOVERING DISCS IN BUT STILL WON'T OPEN!

    It also broke your cap lock. You need to get your keyboard fixed as it makes reading your posts extremely difficult and is considered shouting which is rude
    You need to load your back up or make a temp backup and rebuild your library
    LN

  • HT1551 apple tv was downloading update and power went out

    Cant get the Apple tv to work, I was updateing the software and the power went out, now it won't work at all? any idea what to do ?

    Mac App Store- How to resume interrupted downloads

  • I can't get my Mac to turn on? Our power went out and it is now unresponsive.

    I can't get my Mac to turn on? Our power went out and it is now unresponsive.  I have tried the usual way to power it up but am not getting anything. Does it need to be reset? 

    Which Mac model?
    When you say not getting anything - do you mean no sounds, beeps, etc?
    It is possible that your Mac's motherboard or power supply are damaged.
    Check this (read through the symptoms first):
    http://support.apple.com/kb/HT3964

  • Power went out and now spinning ball of death

    This morning the power went out while I had been working in InDesign and Illustrator. I came in and saved the project before the back up power went out but did not get the Mac powered off completely before the back up stopped. When the power came back on, I restarted the mac and Indesign, and my project is now constantly getting the spinning ball of death; I can't even recover it anymore in Indesign (I can open the file, but the recovery was lost). ALL other programs are fine. Just indesign.
    I went to look for help online and found a recommendation to turn everything off, unplug mac, let it rest then hold the power button down and replug the power then power the mac back on, and now my fan is running at super high speed and I still am having huge problems with InDesign. 1) can you tell me how to get the fan back to the way it was and 2) what do I do about spinny rainbow ball in Indesign.
    HELP!!!!!

    Welcome to the Apple Support Communities
    For the fans issue, first reset the SMC > http://support.apple.com/kb/HT3964 If it doesn't work, it's possible that the computer has a hardware problem.
    Apart from that, it's possible that your hard disk got damaged because of the power outage. To check if it's OK, open Disk Utility (it's in /Applications/Utilities), choose "Macintosh HD" in the sidebar and verify the disk. If it shows a problem, start in OS X Recovery (hold Command and R keys while your computer is starting), open Disk Utility and repair the Macintosh HD partition. If it couldn't be repaired, the hard disk has to be replaced

  • Power went out when iTunes update to 10.5.1 was installing.  Now it's incomplete and I can't download tunes. What ca I do?

    Power went out when iTunes update to my computer was installing. Now it says: "A required iTunes component is not installed.  Please repair or reinstall iTunes (-42404)".  I hit "check for Updates and it shows I have what's current.  How can I fix this without losing all my songs?

    In case you're running Windows, did you check your security software settings? iTunes for Windows: Troubleshooting security software issues
    iTunes has to contact Apple during the process of downloading and updating iOS software.

  • Power went out and my Imac won't reboot

    So I was working on my Imac i bought last year and the power went down a few times.
    After the first time i rebooted it and it worked normally.
    so then the power went out again and i waited with rebooting till the power problem was solved.
    When i tried to turn it on again, It played the sound of starting up and it shows the white screen with the logo and the swirly rotating thingy
    but then a gray loading bar comes and it takes about 15 minutes for the bar to be full.
    then he just shuts down again.
    Tried to turn it on several times. Same thing keeps happening.
    Tried to get the power cord out and stuff.
    not working.
    Please help me.
    I got deadlines

    Mac OS X: Gray screen appears during startup
    Troubleshooting: My computer won't turn on
    Read and follow all the steps.

  • HT1657 I downloaded a movie from iTunes on my iPhone 4S, went out of the wifi zone and now my movie is no where to be found. I can't find it on my iPhone, Mac or iPad. Where is it?

    I downloaded a movie from iTunes on my iPhone 4S, went out of the wifi zone and now my movie is no where to be found. I can't find it on my iPhone, Mac or iPad. Where is it?

    Sounds like the movie didn't finish downloading before the Wi-Fi signal dropping ...
    Try re downloading. You won't be charged again.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Bought my ipod touch 4g from apple's official reseller on 21st November 2012. Purchase slip says warranty ends on 20th November 2013. But apple website says its 19th November 2013. Why? I went out of the store once while buying, was the ipod exchanged?

    Bought my ipod touch 4g from apple's official reseller on 21st November 2012. Purchase slip says warranty ends on 20th November 2013. But apple website says its 19th November 2013 when I put in my ipod's serial number. Why is that? When I bought the ipod, the salesman told me that the latest ios is not installed, so I typed in my apple id and passowrd  and opened the ipod, then they started donwloading the latest ios. During the download, I went out of the store for sometime, then i got back after 10 minutes and had to put my id/password again to begin with the new ios. Was my ipod exchange within this time? Why in a computerized system, If  I have bought an ipod on 21st November 2012, it says the warranty expires on 19th Novembner 2013? Pleasse help, my ipoid even had some scratch on the backside when I first  checked the back side after bringing it home from the store.

    Was my ipod exchange within this time?
    Not unless it was found to be defective, and that would not reset the warranty on the original serial number.
    Why in a computerized system, If  I have bought an ipod on 21st November 2012, it says the warranty expires on 19th Novembner 2013?
    Sometimes it's just wrong. Perhaps the reseller entered in the sales date incorrectly. Call Apple support and discuss the problem with them. They may ask you to fax them a copy of your receipt.
    my ipoid even had some scratch on the backside when I first  checked the back side after bringing it home from the store.
    You'll probably have difficulty convincing them that the scratch wasn't there when you brought it in, but you can go back to the store and talk to them about it.
    Regards

Maybe you are looking for

  • Drop-Down List in interactiveForm

    Hello everybody I've just started using interactiveForm and I've a little doubt, I've a drop-down list linked to a node of the context. I would like to bind an action on the selection of the drop-down list that must update another field/context eleme

  • Compatibility of Informatica 7.1.2 and DAC 7.8.4 with Oracle 11g database

    Hi All, We have situation where we would like to upgrade the Oracle DB from 10g to 11g with the below OBIEE components. Component Current Version Platform Oracle Business Intelligence 10.1.3.4.1 Application Siebel Analytics 7.8.5 Infromatica Informat

  • Reg Unable to find URL for Adapter Engine Error

    Hello, During execution of a scenario, i am getting these errors in sxmb_moni: AE_DETAILS_GET_ERROR 3: Unable to find URL for Adapter Engine af.xip.poecspxioo4 Error when reading the access data (URL, user, password) for the Adapter Engine. Seems lik

  • DVD or CD won't display or appear on hard drive list of devices

    I insert a new CD-R or DVD-R I get no response or recognition that it's there--no icon appears on the desktop or anywhere else I can find. The only way I've found to eject one is to go open Disk Utility and Eject. In Disk Utility the only option I'm

  • Error while strarting SOA service (oracle.ias.opmn.optic.OpticControlExcept

    Hi All , Am facing a big problem with SOA suite installed in Windows vista , first time it worked fine but now am not able to start the service . If am creating a integration service connection in Jdeveloper it showing Failed for BPEL PM and ESB . Fo