HT4806 Get computer audio through TV and/or Stereo receiver

I connected MacMini to my TV/Monitor with HDMI cable. Now I want option to listen to audio through my stereo too so I connected a stereo mini plug to the audio output on tegh MACMINI and to stereo miniplug input on my receiver but do not get sound. Any suggestions?

Hi Roy,
Not sure, but did you open System Preferences>Sound & see if you can select output there?

Similar Messages

Getting static audio with Titanium and Vista x64 at random times

@Getting static audio with Titanium and Vista x64 at random times$ I have had this card for about 6-8 months and relati'vely no issues.
I just upgraded to the latest drivers 270006 and now, sometimes after exiting Turbine's Lotro, my audio plays but is very static-y, but it doesn't happen all the time. I had iTunes minimized when playing Lotro and then went to play a song after exiting. I quit iTunes and tried it again and it was ok.
This also happened in Firefox, a YouTube video had the same static audio.
It doesn't happen all the time and I do play other games, but I haven't been playing much else right now.
So right now I don't know if it's a Lotro thing or just the drivers.
I have a Q9650, single GTX260, Asus P35 board (not SLI), Vista x64, 4GB.

Carl, do let us know on the Safe Mode test... would be the first thing I'd try with what you've mentioned, but yeah, daisy chained Hubs could possibly play into it.

How can I get synched audio through the computer rather than camera in FCE?

There does not seem to be an easy way to listen to FCE audio through the computer's setup for internal or external speakers. I have for years used Detour to route all of my audio through an M-Audio Firewire 410 interface, and then on to my home stereo system. I then route all systems sounds and sounds in apps like iMail through the internal speaker. This works great. Except with Final Cut Express. For quite a while I could not do anything except play through a firewire connected to an attached Sony PC100 digital video camera, plugging headphones into it's jack.
After many hours and reading many strings on this and other discussion boards, and even reading the product manual, I tried sending FCE through the computer speaker and sure enough it works. By that reasoning, I had Sound Prefs send all audio through the m-Audio setup and that works. Except now I must listen to all of the system sounds that way as well.
OK, I could live with that for my editing sessions, except that now I am experiencing a sound synch delay of around one second. It's all fine when I switch back to the camera as the monitor, but not when routed through, what should be the better sound setup, having the comouter send the soud via the m-audio and stereo.
G5 dual 2Mgz Mac OS X (10.4.5) m-audio firewire 410; 1.5G DDR SRAM;

In final cut, you want the audio to be following the same path as the video - otherwise, as you have experienced, there are processing delays.
If you are sending your video out firewire to an external monitor, the audio should follow. Take the audio off of the A/DV converter and route it to your speakers (or amp & speakers) from there.
good luck.
x

Is there a way to play my macs computer audio through airport express?

I have a stereo receiver that only plays through the auxillary port, and i have been using airport express to play my music and movies in itunes through it. Some of my other movies however are neither in itunes or playable through itunes. Is there a way to send the computer's audio output (not just itunes) through airport express and thus into the stereo receiver? Much help would be appreciated, thanks!

Try using Airfoil.
(62000)

How to get pc audio through seperate stereo receiver - Audig

Hello,
I have an Audigy 2 SC and a yamaha 5. stereo receiver + subwoofer:
http://www.yamaha.ca/av/Hometheatre/YHT70S.jsp
I've been trying to get my pc audio (songs,dvd's,pc games) to go through the receiver. Thus far I have only been able to hear audio through the green input (one of the line outs) yet I only hear audio on the right side of the 5.. Only the front right, back right and center speaker are emitting the audio. In the options I have de-selected the "Digital Output Only" tab, set the speaker settings at 2.. The cable that I'm using is a headphone jack at one end (into green input port) and RCA's at the other hooking into my AUX inputs on the receiver.
How do I get either get 5. or just the front speakers to work properly?
Many thanks for anyones help

Hi and welcome..
didnt use Bluetooth for audio , but Try to look at windows system sound section,... like a receiver you have to choose where sound comes , think windows could that not know automatic ...there should be in the a menue where you can change to bluetooth device instead of internal Audio ...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Bought photoshop and gets half way through downloading and my macbook crashes.

I have bought Photoshop after using a trial. I uninstalled the trial and everything to do with it and yet when it comes to downloading Photoshop through creative cloud it gets part way through and my whole macbook crashes. I'm wondering whether this is my macbook or photoshop?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Apple TV audio through interface and monitor speakers?

Hi all,
See following pic of my setup...
My question is as follows....
When Macbook is linked to tv via airplay, which is my normal setup as I produce music and use both screens, the sound output is set through Saffire audio interface and comes out the monitor speakers and all is good with the world, however, I want to be able to sit back and watch the apps on Apple TV as is shown on the big screen there ie. Netflix/NBA TV, but still using my computer soundcard and hence through the monitor speakers instead of it switching back to the TV sound.
IS THIS POSSIBLE???
Thanks in advance for any help.

Thanks for the response vazandrew. I've looked further into what you said and the solution is as follows;
http://www.amazon.co.uk/eSynic%C2%AE-Digital-Optical-Coaxial-Converter/dp/B009ZR 7IB8/ref=pd_sxp_grid_i_0_2
Ditial optical out to toslink audio converter, then out the converter to RCA/Jack etc.
Hope this helps anyone else with same question.

Canon HF G30 5.1 audio through iTunes and Apple TV3?

Hi All,
In brief - I've converted the AVCHD movie files to MOV files and MP4 files with ClipWrap and Handbrake, fully expecting resultant files to play surround sound through my system via Apple TV3 and iTunes. I have movies on my iTunes library playing surround sound audio from other movies, so I know it's not an ability issue with my equipment. I've tried various conversions in Handbrake and even by playing just the converted .MOV files imported into iTunes directly - with no success - all I get is stereo output from "6 channel" files.
What major point am I missing please?
Many thanks for your help and patience.
Cheers
Chris

Hi,
I experienced some DTS files in iTunes, with my AirPort Express some months ago, it was working fine on my Marantz receiver. A few days ago I wanted to listen to them again, only white noise... I wanted to rip by myself a DTS-CD, therefore I found this out. Apparently since AirTunes has been turned to AirPlay, it's not working anymore (?) / the same way.

Audio through RCA and HDMI not in sync

Hi,
Is this a common problem?
Recently got a tv with hdmi so the appletv is now connected with hdmi to the tv. But it is also still connected to my stereo though the rca connection (for music or movies with soundtracks that I really want to enjoy).
Problem with both music and movies is that the audio is not in sync between hdmi and rca. Hdmi is a bit delayed.
Now for music this is not that much of and issue as I usually have the tv off and use the iphone remote to select music on the appletv which plays then through the sereo. But for movies it is, I have to turn off the tv volume completely. It was much better to have the sound of the tv also on for dialogue, gave a more natural impression if it did not only come from the stereo. But with the delay it is just not good anymore.
Any ideas, known problem? Fixable?
Thanks,
S.

Stekke wrote:
Hi,
Is this a common problem?
Recently got a tv with hdmi so the appletv is now connected with hdmi to the tv. But it is also still connected to my stereo though the rca connection (for music or movies with soundtracks that I really want to enjoy).
Problem with both music and movies is that the audio is not in sync between hdmi and rca. Hdmi is a bit delayed.
Any ideas, known problem? Fixable?
Most modern TV's have an input lag during which various processing is applied to the video signal, and the TV audio will be delayed accordingly - the longer this delay the more you're likely to notice a discrepancy between RCA/optical and HDMI.
This is not the AppleTV's problem.
While you might want both audio outputs playing together it invariably causes problems.
Only if your amp has some kind of delay function on the input could you compensate by slowing teh audio from the amp.

AE and Computer- Audio dropping out and stuttering issues

Hi all,
I recently bought an Airport Express 2 weeks ago. I hooked the unit up in my bedroom via ethernet(roaming) method. I use Airplay and turn on Computer and Airport Express to play both in my living room and my bedroom at the same time. Problem is I'm noticing my iTunes in my living room exhibits some stuttering during songs or the audio will start to drop out intermittently and sometimes shuts off completely but the Airport Express is still playing in my bedroom without issue. I've tried turing off the wireless but it doesn't do anything. When I turn off AE in Airplay and just play using the Computer it works fine. I'm not sure what can be causing the interference but it seems its between my computer and AE when they are both turned on. I would appreciate any suggestions forum members have to help me resolve this issue. I have the 2nd generation AE. Thanks a lot.
Macthemini

Hi Macthemini,
Thanks for using the Apple Support Communities. It sounds like you are experiencing issues with AirPlay between iTunes on a Mac mini and your AirPort Express. The following resource outlines troubleshooting issues for AirPlay performance:
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
http://support.apple.com/en-us/HT203822
Troubleshooting performance issues
Wi-Fi Connection
If you are experiencing intermittent playback or significant network lag with AirPlay, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your AirPlay-enabled device.
Ensure that other devices aren't trying to stream to the same Apple TV at the same time.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
- Matt M.

Trying to buy extra storage but I get half way through process and am sent back to the beginning

I Am trying to buy extra iCloud storage , I complete form put in card details , press buy and then it asks for card details again I cannot get past that stage

Hi Renaissnce1950,
If you are having issues upgrading your iCloud storage, you may find the following article helpful:
iCloud: Troubleshooting storage issues
http://support.apple.com/kb/TS4009
Regards,
- Brenden

Getting mpeg2 component through fcp and dvd studio

hey guys~
i checked on the quicktime website saying that i could upgrade my mpeg2 component if i have fcp or dvd studio. how are you suppose to get the upgrade..
Thanks.

You are probably reffering to the QuickTime MPEG 2 Component. I think it's part of Compressor now, so there's no need to upgrade something.
http://docs.info.apple.com/article.html?artnum=301493

No sound when streaming audio through USB to car stereo *solved*

Short version: Many months ago my wife and I had iPhone 4s with AT&T and my phone would playing streaming apps (Pandora, Slacker) over USB to my Pioneer head unit and my Ford SYNC while my wife's would not. There was no error given, it appeared to be playing fine-- there would just be no sound.
Fast forward to present and I have a Verizon iPhone 4 and I am getting the same issues as my wife was having previously.
After much forum reading about iOS4 breaking this functionality for many people across the globe with many makes and models of stereos and cars I realized I was not getting the same error as all of these people. I was getting NO error at all; I just wasn't getting any sound out of these apps.
I read a post about how a random song would kick on when they connected their phone to the car, then it hit me. My old iPhone used to do that. Then THIS hit me. I do not have any mp3s synced to this phone. Nor did my wife back then. So I threw a handful of songs onto my iPhone and sure enough it immediately chose a song at random, started playing it and then I switched to Slacker radio and it faded down the iPod song and started streaming the audio from Slacker.
tl;dr version: If streaming apps are not playing any sound through your USB cable. Make sure you have some songs synced to your iPhone.

I found a solution, reset all settings. Settings > General > Reset > Reset all Settings
Fixed the problem, now back to properly streaming music!

Playing music through nano and auto stereo, while traveling...nano is set to shuffle, but if vehicle is stopped for more than a few minutes, nano restarts with same song everytime! How do I make it really shuffle the songs

Having trouble with Nano shuffle while traveling. It's connected to my vehicle stereo and set to shuffle. When I stop the vehicle for more than a few minutes, the music resumes with the same song it always starts with. How can I get it to keep shuffling after restarting the vehicle?

Is the iPod actually doing the music playing? If the iPod is connected using a USB port (on the car audio system) and docking cable, the car audio system is doing music playing. The iPod is just acting as a storage device (like a USB flash drive) with song files. So, in that setup, it does not matter whether the iPod is set to shuffle or not, because the car audio system is playing the songs. Any change to how it plays songs would have to be a setting on the car audio system.

Why is there no image just audio on videos saved on the computer from iOS 6 and 6.0.1?

I use my iPhone for pics and vids a whole lot. Before switching iPhones I had over 1200 pics and over 150 vids on my iPhone 4.
About 6 weeks ago I bought a 64GB 4s to be able to save even more pics and vids. Well this 4s was on the original iOS 6 already.
I just updated to iOS 6.0.1 about an hour ago. I tried saving all my pics and vids before doing so. Pics are saved just fine but all of
my vids aren't. When I play them back I only get the audio from it and a black screen. I've been saving my pics and vids like you
would from a camera going through (My Computer) on my PC and saving them to a folder. All of my old videos still play through
QuickTime which were recorded while using iOS 5 and iOS 4 I recently did an updated on on QT as well... so what's happening?
Please help.
Thanks

But it's always worked and still works on all of my older videos.
It has something to do with the new iOS 6 but I'll try your
suggestion.
Thanks

HT4806 Get computer audio through TV and/or Stereo receiver

Similar Messages

Maybe you are looking for