HT4818 Using and existing bootcamp as an external HD
Hey,
i used to use snow leopard osx with winows7 bootcamp. Recently i just changed my hd and started using Lion. I realised i can still boot my old snow leopard but i was wondering if i can still boot my windows back up?
Hey,
i used to use snow leopard osx with winows7 bootcamp. Recently i just changed my hd and started using Lion. I realised i can still boot my old snow leopard but i was wondering if i can still boot my windows back up?
Similar Messages
-
OEM 10g grid control using an existing database
Hello all,
Has anyone been successful in installing Enterprise Manager 10g Grid
Control (10.1.0.3) using and existing 10g (10.1.0.3) database?
10g grid control comes with 9.0.5.0 database for it repository. Since
this respository can not be update to 10.1.0.3, Oracle recommends using
and existing 10g database instead.
My installation goes 90% all the way before it fails. It fails at the
create repository point.
If any one has been successful, could you please share your success
with me.
Thanks,
JakeWell, finally I did it! :)
The problem comes when you are trying to install OEM repository into existing 10g DB which used to be configured with a standalone Database Control. Dropping SYSMAN user is not enough!!! There are some leftovers which must be cleaned before running repository creation assistant:
drop user SYSMAN cascade;
drop user MGMT_VIEW cascade;
drop role MGMT_USER;
drop public synonym MGMT_TARGET_BLACKOUTS;
drop public synonym SETEMVIEWUSERCONTEXT;
That's all folks. -
i have a new mini mac and i want to use my existing external hard drive but it needs to be reformated how do i do this without loosing all my old photos?
Formatting will erase the drive.
You need to copy the photo's to either your old computer, the Mac Mini or to a new external drive and then decide what to do with your existing external drive.
For example: You could use one External drive for Photo's and one external drive for Time Machine to backup both your Mac Mini and the Photo drive. -
THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help! -
I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?
There are very specific requirements for using an iMac as an external display.
From Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or Thunderbolt connection
A Thunderbolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
Note that the iMac (Retina 5K, 27-inch, Late 2014) does not support Target Display Mode. -
Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?
Yes.
1) Connect an Ethernet cable from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule
2) Go through the standard configuration suggested by the setup "wizard"
3) Then manually turn off the wireless function using AirPort Utility -
How do you take your existing iTunes Library and move it to an External Drive?
I'm at my capacity of Storage Space on my iMac w/ the majority of memory being used via iTunes. Is there a way to move my existing Library to my external Hard Drive and still look/run the same as if on my computer? How can new loaded music/movies/etc. be loaded to that same library on the external drive? Will I need to do something different in my normal Time Capsule Backup since the Library no longer resides on my computer's Hard Drive? Many thanks for the help?
HD2600 Hater wrote:
I copied the entire iTunes Folder within [myusername > Music] to my new external drive.
at this point, you need to launch iTunes while holding the option (⌥) key, click on choose library when prompted, and select the iTunes folder you copied to the external.
I then went to 'Advanced' in iTunes Preferences and pointed the new folder location to the copied iTunes folder on the external drive.
this only tells iTunes where to put new additions to your library, not where the current content is. -
I want to do a clean install of maverick on my 2010 mbp. I need to know what disk to use and also how i take certain files off my external hard drive and put on my computer. When I was having problems with my airport they did a clean install and they pulled files of my time machine. however they forgot to put the partition back in for a windows side. Originally I had Parellels on my computer. After my external hard drive got corrupted i called apple and they fixed the problem but didn't have me set up the time machine except for the external hard drive. Now my only back up is from the external not from the laptop. I am not sure how to do any of this. I am not computer savvy...PLEASE I NEED HELP>
First, you need to make a backup of your MBP onto your external drive. I suggest you start by cloning your MBP drive to the external drive:
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
This clone is fully bootable and also contains a clone of your Recovery HD.
Second, you need to do a clean install of OS X onto your MBP as follows:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
This should accomplish your goals. You will have a clean install of OS X on your MBP and a bootable clone of your old system and all your files on the external drive. -
I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died. Fortunately I've been using Time Machine to back up to a 2nd external drive. How do I restore my libraries to a new external hard drive?
This is a tricky one.
Open up Time Machine and go back to a date using the timeline on the right side of the window when you know the drive was working and was backing up as part of Time Machine backups.
Click on the name of your Mac under the Devices heading on the left side of the window in Time Machine, and if things are working correctly you will see Macintosh HD (or whatever you have named it) and the name of the external hard drive that was backing up in the past.
Right-Click on the name of the external hard drive and then click on "Restore (name of drive) to....." You may be asked for your adminstrator password at this point.
It might be easier to restore the drive contents to your desktop if you have room on your Mac, and then copy things over to the new external drive where you want to store the Aperture and iMovie Libraries.
Once the libraries have been moved over the new external hard drive, you will likely need to "point" Aperture and iMovie to the location of the libraries on the new external hard drive. -
i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???
Does your external hard drive have it's own power supply? It should.
Is your external hard drive formatted with the NTFS file system? It won't work.
It needs to be formatted either with Mac OS Extended or FAT32.
(There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.) -
I have recently transferred my iPhoto Library to my external hard drive (WD MyBook Live) and have some questions. Since I have done this and used the "alt + option" to select it as my default library I have been having some issues. When using the library on the external drive as my default drive it takes a very long time to load compared to when it was on my macbook's hard drive. Is this normal? Also, once it does load the thumbnails are only viewable when scrolling quickly through the photos and they are very blurry. However, if I were to select one randomly (because of this problem I have no way of knowing which one I'm selecting) it brings it up in the edit view and it is a crystal clear picture.
Is there a way to fix these issues? I'd love to be able to use the iPhoto Library off the external drive to free up space on my macbook but if it isn't going to work as streamlined as it would on my macbook hard drive. I have not yet deleted the original iPhoto Library from my macbook because I did not want to do so until I knew the new iPhoto library on the external drive was working properly. Does this make a difference?
Please help!The problem lies with occasional dropouts that can corrupt the library's database files if they are being written to as the time of dropout. It's the nature of wireless networks. If you have a very strong signal throughout and are willing to take a chance then go for it.
But as for the speed, it must be iPhoto 11 and it's complexity causing the slowness. I had tried using a library on an EHD connected to my iMac from my laptop wirelessly with iPhoto 7 or 8 and it was pretty fast. I think it was 7 before faces and places came into being.
Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html to improve wireless performance, etc.
OT -
I am trying to delete pages from a PDF file. I opened the bookmarks in the PDF file, selected the pages to delete and choose Edit > Delete. The selected pages are not deleted. Note: I have to open the file using a passport provided by an external party.
Resolved
-
I just bought an Imac. I have an ipad2 and an iphone 4s. My wife has an iphone 4s. Both of us have different apple ids. Would you recommend a new one or use an existing id? Why?
It is best to stop making all new apple IDs, as software is permanently tied to them, and you can't converge them. Make differnt ones if you plan to get divorced though....
-
I used my existing apple ID when I purchased a second iPhone for my business.. Now all my texts are coming to both phones.. Is there a way to create a new apple account for my business phone and if so.. How do I delete one and add another?
Yes, you can have two separate Apple IDs, and it's pretty easy to set this up. Go into Settings > iTunes & App Store on your business phone. You should see your current Apple ID. Tap on it, then tap on sign out. You can then create a new Apple ID, using a different email address and password than those associated with the Apple ID on your other phone. Log back in using this new information, and you shouldn't get the texts that come to your other phone.
Hope this helped! -
I copied an old iTunes library off my old Toshiba laptop with windows xp and put it on an external hard drive. I have a newer Microsoft surface pro laptop with windows 8.1. I have a small iTunes library on my newer laptop. I want to combine the 2 libraries into 1, add newer podcasts to the combined library daily, but keep it all on my external hard drive, so I don't use all my memory on my surface pro. I have an older ipod classic that I have all my old library on. I love it and don't want to stop using it, but want to be able to add podcasts from my 1 library from time to time. What I usually do is download podcasts for a few weeks then, download them to my ipod. Haven't done any of this in about a year. But want to start getting regular with it again. PS I'm not very computer savy Thanks for any help or advice!
This article explains how to open a different library: iTunes: How to open an alternate iTunes Library file or create a new one. The assumption is that the whole library was copied to the external drive from the old Toshiba laptop, not just the media. If that isn't the case make a new library on the external drive in a folder called \iTunes and move the media inside \iTunes\iTunes Media before adding it to the library.
Once iTunes is using the library on the external drive you can add any content stored on the internal drive to the library by drag & drop or by moving/copying the content into \iTunes\iTunes Media\Automatically Add to iTunes. Make sure the option under Edit > Preferences > Advanced to Copy files to the folder iTunes Media when adding to library is selected. Once complete you can delete the original copies on the internal drive.
Should your library contain duplicates after merging see this recent post on deduping.
If there are ratings, playlists, play counts, or content stored on the iPod classic and not located anywhere else then see Recover your iTunes library from your iPod or iOS device.
Ideally you should backup your library to a second drive for security. See Backup your iTunes for Windows library with SyncToy for a suggested strategy.
tt2
Maybe you are looking for
-
FTP and DHCP Server on Windows Server 2012
Our company recently bought several Dell Wyse R10L Devices from another company. We can use these to make remote connections to a remote server but we have a problem when we use two monitors. The picture stretches across two monitors. On the official
-
The camera roll, on my iPad2, is showing 3.8GB usage, even though it is empty! I have followed all advice seen on forums and discussions, except a restore, as I don't want to loose children's in-app work. Anyone have any ideas?
-
Intermittant server error when trying to compile jsp.
Hi, I'm testing my jsp on different browser versions, and on different connection speeds, and I'm finding a consistent problem with using weblogic v6.1sp1 and slower connections. (about 56k) In IE 5/5
-
My Macbook (safari) suddenly thinks it has adblocker but i never installed it and its not in extensions. its blocking a tv site i watch - how to remove it if it's not there?
-
How do i change the size of a select list?
Hello everyone, I know this is probably a newbie questiopn but i spent some time trying and already browsed for the forum to look and found nothing related to it. I m using apex 3.1, and i would like to know in what part of the item i define it's siz