HT4818 Why is that window 7 run with my MacBook Pro have no audio and sound?

Good day everyone,
Why is that my 'Window 7 Ultimate' run with my MacBook Pro have no audio and sound?
I've successfully install it with Bootcamp 4.0.
Does anyone know what's wrong? How to fix it?
Thanks.

Good day everyone,
Why is that my 'Window 7 Ultimate' run with my MacBook Pro have no audio and sound?
I've successfully install it with Bootcamp 4.0.
Does anyone know what's wrong? How to fix it?
Thanks.

Similar Messages

  • Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

    Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

    Yes, I too had this problem.
    I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
    MacBook Pro Retina running 10.8.2 (12C54)
    Lightroom running 4.1
    Hope that helps.
    aa

  • I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

    I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

    I just tried this, no luck...
    I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
    At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

  • How do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

    how do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

    Ok.
    I am connected to wi-fi through TC connected to a specific router and is working perfectly and saving data through TM without any issues.
    The TC version is 7.6.1 and am using OS 10.7.3
    The router mode is on Bridge mode and router is connected to TC through USB cable, I suppose for internet access. My Mac is on wi-fi through TC
    I have another location, much further, which recently have been installed with wi-fi through router that has WPA accessibiulity with password, 100% different than the current one.
    Since, I will be most of my time in this new location, I wish to move my TC to this new location, and configure it in similar fashion like what I am having right now.
    Naturally, I do not wish to lose any saved data on the TC.
    Hope I managed to provide enought info.
    Thanks in advance

  • Using Windows 8 with my macbook pro

    Hello,
    I currently have a problem to install Windows 8.
    Last week, I bought a Windows' 8 license.
    The configuration of my macbook pro is the following :
    - i7 2,3 Ghz (four cores)
    - 8 Gb of RAM
    - A 256 Go SSD
    - A 750 Go Hybrid-disc
    - OS X 10.8.2
    So I removed the Superdrive but I bought an ASUS external USB disc-drive (witch works with OS X)
    I inserted the Windows 64 bits disc in the USB drive and I created a 50 Go partition for Windows on the SSD (FAT) with Bootcamp.
    After this process, my macbook reboot but it bloked on the PC's shell interface without message, just the cursor (Right-Top).
    I tried to reboot many times and to use the 32 bits disc but it is alredy the same.
    I also tried to boot using the "C" key, the CD boot, i can see the fourth blue square on the screen, and durind 2 or 3 second the charging animation but after it says that there is an error (new blue screen very very quickly), or a black screen with somes information like "Error 00000050x0...".
    However, I tried the alt key. 2 solutions :
    - "Windows 8", it is like the first situation (black screen with sursor)
    - "EFI boot" (it appeared once), the computer boot on the CD, I can acces to menus and tell the name of the hard disc I want for the installation. But when I want to continue, a window appear with a EFI problem and he says to reboot with a different configuration (but I am not sur).
    What can I do to install windows 8 on my macbook pro ?
    I need it for Solidworks...
    Thank you for your answers.
    Nicolas
    ... Sorry for my bad English, I am French...

    nicolas_p_9 wrote:
    Thank you for your answer !
    Do you think I will have to wait a lot ?
    All you can get is a guess, we have no more access to that information than you do, how about:
    Hopefully not too long.

  • I am looking for a ToDo list app that will run on both MacBook Pro

    Good morning,
    I am looking for a To Do List app that will run on both a iPhone 4S & MacBook Pro that will synch via iCloud?  Thanks for any help offered......Pat O'Brien

    Reminders should work...
    Clinton

  • I need urgent help with my macbook pro, installed a theme and now unable to open windows, please help !

    Hello,
    I installed a theme on OS X Lion that was actually made for snow leapor, because on a youtube video someone said it works with Lion too,  
    After installing it I got problems seeing close and minize icons.
    And After reinstalling my Macbook pro, I am unable to open finder, Safari, Terminal etc.
    I have tried to get help from several help forums, and tried changing files as described here
    https://discussions.apple.com/thread/3256533?start=0&tstart=0
    Theme was downloaded from here
    http://www.fif7y.com/themes/sog/

    Okay, it's both for your first question: When I import the songs to the library, the songs are not in the correct order as they were on the CD. And, in the process of my importing the songs, the library scrambles the songs in different sections of the library (I explain further below)
    I don't know what you mean by "little triangle" pointing up or down. What's that got to do with the price of fish in China? lol
    When I get the music in the library the songs come out sorted this way: 2 songs from CD 1 appear one section of the library, then 1 song from CD 2 appears in the next column, along with the album work. Then, I go down farther, and there's a few more of the songs from CD 1 in the next section. I go down again, and maybe 2 or 3 songs are in that column. Along with the artwork for that CD. Then I scroll down again in the library, and there's maybe 3 or 4 songs from CD 1 there. Get the picture? It keeps sorting the songs in that order. And yes, the CDs I was importing were compliation dance CDs, along with some from the same artist, like Barry Manilow.
    I hope I answered the questions better so that you can help me Thanks in advance, Glenn

  • Cant find non the the iphoto, imovie, and the rest of the apps in that category that originally came with my macbook pro

    i purchaced my macbook pro a year a go and i had the iphoto, imovie, ilife, iwork. but the other day i mad some upgrades to my macbook, new rams and installed a 2nd SSD hard drive in place of the optical drive. it is used as a boot drive while keeping the HDD for storage. but now i cant find the iphoto, imovie, ilife, iwork. and when i go to the app store in purchased tab i cant find them as well. and when i tried to download them from the featured tab, they are listed for full price?
    how can i get my apps back please ??

    That would be strange since iv used iphoto. every single time I hooked my iphone to my MBP to download the pic and  that would be couple of time every weekend since i bought the laptop. And iv used Imovie several times to make videos for instagram.
    But thank you for your suggestion
    FYI: I never had to purchase them I just registered them when I used them for the first time. I know I used to see them all under application file but the Iwork and Ilife never been used before.

  • Why does my brand new 15" Retina Macbook Pro have such a sluggish interface?

    I just recieved my 15" Retina Macbook Pro 2.4Ghz 8GB RAM GT 650m 1024mb, and it is extremely sluggish when resizing windows, or even launching apps. Its bad enough that it will take 2 seconds some times to see the window move a little bit after attempting to resize it. I haven't installed anything on it so far, I've done all the automatic updates, including the SMC fix for retina displays, ran the Apple hardware scan, and nothing has given me any hints on what gives. I've read other reviews that people have had issues with the retina models being slow when it comes to the interface, and I'm tempted to send my retina model back, in place of the regular Macbook Pro. Any suggestions, or is my plan to replace it my only option if I want a well performing machine?

    You have 14 days to return the computer w/no questions asked.  Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • Why does Macbook Pro have gray "curtain"and msg to shut down when playing video online?

    Hi,
    I have a MacBook Pro running Snow Leopard v 10.6.8 and have put on all the security updates.
    I bought this machine just days after the newest MBP's were released with Lion because I wanted to stay with Snow Leopard
    From the very beginning I would have occasional "gray screens" with a message that I'd encounterd a problem and needed to shut down.  It always occured while I was watching a streaming video online (Flash?) but it didn't always happen.  I updated my Flash plugin and that seemed to help.  I use both Safari and FireFox and both are now updated to the latest versions.
    I had also noticed via iCleanMemory that my memory availability was very low .....I always have many tabs open in my browsers and have backup software that backs up to online storage running and when I watched a video, it dropped to almost 0 and everything ran slow.  I had 4 GB Ram.
    So, I ordered new ram and put that in and now have 8 GB.  Machine runs fast. Love it....except it keeps giving me that veil of gray and the message to shut down.  It happens several times a day now and while usually in conjunction with watching a video clip, it's not always the case.  But I have lots of available memory.  That wasn't the issue.
    I found an Apple Support paper relative to needing a video update on some mid 2010 MBP's and downloaded it.  It won't install and says it won't run on my system so that didn't help.
    I'm at my wits' end trying to keep this thing running.  Everytime I have to shut it down it means a minimum of 8 min...sometimes more.....before it will restart.  If I try to restart sooner than that, it begins to boot and then just has lines and lines of numbers and code running across it....and often continuous beeping sounds and I have to hold the button down to shut it off again.  If I wait long enough, it does boot back up and sometimes runs fine as long as I'm not watching video clips, a streaming tv show or clicking on a lot of links in web pages.
    I don't believe it has shut down when I was doing anything that wasn't web related....i.e. on a browser. And, when I was running with only 4 gb ram, it rarely shut down, just ran very, very slowly.  Now with 8 gb ram it is speedy but doesn't seem to want to keep working!
    Anyone have any ideas what I should try next?
    Thanks
    Paula

    Hi Allan,
    Thanks for your reply.
    I have been closing iCleanMemory but the shut down (kernel panic) was still happening.  Not sure how to go about uninstalling it as it's one that runs at start-up and dragging it to the trash might not get rid of it completely.  I"ll find it's web site and see if they have any info.
    Haven't checked your web link yet (it's late and gotta get to bed) but will do so tomorrow.
    I also run Backblaze and DropBox that begin at startup and are constantly updating in the background, iStatMenus and Sharpshooter. 
    The kernel panics were happening....tho much less frequently.....before i put iClean Memory on.  If I remember right, I installed it just because I had those periodic shut downs and wondered if it was a lack of memory.  Because I then saw that memory was very low all the time, I decided I must need to put more memory in.  And that seems to have made the issue worse while also making the machine work faster for the time it is running.
    Now, I've been working on here for a couple of hours and had no problem at all......but I haven't asked it to play any kind of video.  Before I quit for the night, I'll try to watch the last one I tried that caused it to shut down and see if it does it again.
    I do appreciate your help as I have just enough knowledge about these things to be dangerous.
    Paula

  • HT201335 my apple tv video is delayed when its mirrored with my macbook pro but he audio is fine.

    When I mirror my macbook pro to my apple tv the video is greatly delayed but the audio is perfect. how can i fix this?

    Clamshell and mirroring are two distinct concepts, I know.  As to the lost audio, I have restarted my equipment more than a few times.  It's usually one of my first options.  Just don't understand why the audio stays home and the video makes it to the tv.  That's with mirroring.
    I really want to be able to close the lid of the MacBook and use the tv as a desktop.  With mirroring, the cursor is choppy and reacts slowly.  I wish to watch programming stored on my drives on the tv.  I dont really need or want mirroring, but it's the only way I know of to get desktop to the tv.  And mirroring still suffers audio loss.  Someone in the community mentioned using and external keyboard and "clamshell" but they didn't elaborate.  That's what I'm really wishing to accomplish.
    Thanks, Sir Winston.

  • I am installing Windows 7 on my macbook pro OSX Mountain Lion and I get an error message:" Your disk could not be partitioned." What does this mean?

    I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • Issues with 13" Macbook Pro Retina sleeping/waking and starting up?

    I am having 2 issues which are driving me insane.
         1. It will not wake after the lid is closed for more than an hour or 2 and I have to hold the power button down to turn it off and startup again. - SO ANNOYING!
         2. Occasionally it will not startup. It makes it to the apple logo screen with the spinning thing and just stays on that screen (I have left it overnight and nothing      changed), and I am forced to hold the power button down to turn it off and startup again.
    Not impressed, its been like this since day 1. Its only a month old today.
    Any information would be helpful considering apple care talk to me like im an idiot, e.g. "Have you tried turning it off and on again?". I work in I.T. so i've tried most things, such as SMC reset and clearing the PRAM to no avail.
    Thanks guys

    I'll just assume no one can help then...

  • I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

    I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

    Click here and follow the instructions. If they’re not applicable, buy an iWork 09 DVD from a source such as Amazon or eBay.
    (116937)

  • Is there a receipt scanner that works with the macbook pro that imports line items into numbers or excel?

    Is there a receipt scanner that works well with the MacBook Pro that imports line items into Numbers or Excel?  Thanks.

    Yes. Google...

Maybe you are looking for

  • Creation of project, Project ID any number ranges are there?

    Creation of project, Project ID any number ranges are there?

  • How do I move my sync to my new MacBook Pro

    I have a G4 Quicksilver running OS X 10.4.11.   The iTunes on that Mac is upgraded as far as it can go and did not support iOS 4.2.1.  When I got my new MacBook Pro and plugged in my iPod Touch, the iOS got upgraded to 4.3 and now I can no longer syn

  • Syntax error, insert "}" to complete Class body.

    Hello everyone, I am trying to create simple Adobe form with WebDynpro for java. Java error in autogenerated class appears "Syntax error, insert "}" to complete Class body". As I see, java class really corrupted - there are no "}" at the class end. R

  • Reg:working without Keyfield in FCC node structures

    Hi All, I have a scenerio of FCC to RFC , where i need to read a Text file and want to post it to R/3 through RFC Recordset Structure : Header,1,Item,*,Trailer,1 Is it possible to read the file without Keyfield vale ? Please give your valuable sugges

  • Need DVD disk root window to show a background picture. How?

    Please forgive me.. but I've searched for an answer and can't seem to find one. I created a DVD for a town to be used in DVD players. I also included on the DVD an Extras folder that has a web site and pdf's. What I want to do to polish it off is to