HT4839 the iPhone Configuration Utility 3.6/2.2 for Windows will not start up/load anymore.

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Similar Messages

After installing iTunes 10.7 the iPhone Configuration Utility will not open?

I installed iTunes 10.7 yesterday when prompted but can no longer open the iPhone Configuration Utility - nothing happens and there are no errors. Have re-installed the IPCU but it still won't open. Are others having this issue? Any suggestions? Thanks in advance . . . .

I tried,
1) Uninstall Apple Mobile Device Support
2) Uninstall iPCU
3) Reinstall iPCU
But still iPCU does not open. I think it is due to Itunes 10.7.
Also I could not get Itunes 10.6.3 from apple site.
I tried to uninstall complete apple softwares from my system.
Then installed itunes 10.3 and iPCU 3.5.
iPCU worked, but itunes did not recognize connected Iphone 4S.

Hello. I wanted to know if the iPhone Configuration Utility is compatible with 5 ios?

Hello. I wanted to know if the iPhone Configuration Utility is compatible with 5 ios?

Apple iPhone Configuration Utility 3.4 was released yesterday.

Can I force the iPad background image from the iphone configuration utility?

I am using the iPhone Configuration Utility to roll out a dozen iPads. Can I use the utility to force the background image to a certain image?
Thanks!

https://www.google.com/url?sa=t&source=web&cd=1&ved=0CE4QFjAA&url=http%3A%2F%2Fi tunes.apple.com%2Fus%2Fapp%2Fapple-configurator%2Fid434433123%3Fmt%3D12&ei=aF3sT 6S5GcK82wXimvyzAQ&usg=AFQjCNHfh80e1bZIj4401RDXy5kH3RDSuA
Configurator
Ipcu Is ghetto for config production.

Is the iPhone configuration utility borked?

I've downloaded the iPhone configuration utility and am trying to setup a generic configuration file so that ANY user on our network can download it and then be prompted to enter their username & password to set them up.
Seems it doesn't work that way, regardless of the admin guide PDF.
Under the Exchange tab, i've configured the Account Name, Exchange ActiveSync Host but when i leave the User and email address fields blank, then export the configuration file, when it's imported the first thing that it prompts for is a password. What good is a password if you have no username????
I created a new configuration file with my username/email address and imported that, it prompted me then for my password and it worked fine.
How can I create a generic configuration file that will prompt a user for their username and password (and have the server address and other options hard coded into the profile so they can't be changed)?
The admin guide seems at odds with the configuration utility, and contradicts it.
All advice appreciated
Cheers
Shane.

Hi,
You are using the Config Utility on a Windows PC, right? I've had the same phenomenon: Apparently, there's a bug in this version that doesn't create a proper config profile when you leave the Exchange Account name blank. (The Mac OS version does it properly.)
As a workaround, after exporting your profile from the Config Utility, open it with an XML editor (even Word will do), look for the Exchange Account Name key and string ("PayloadAccountName" I think it is), and delete them from the profile. When users install this modified profile, it should ask for the username as well.
HCD

I need instructions on creating a configuration profile to turn off the Deleting Apps button on an iPad using the iPhone Configuration Utility, please.

I need instructions on creating a configuration profile to turn off the Deleting Apps button on an iPad using the iPhone Configuration Utility, please.

The deleting apps restriction is new in iOS 6 but is available only on supervised devices. You can supervise devices and create and install a configuration profile containing this restriction using Apple Configurator.

What happened to the iPhone Configuration Utility?

There used to be about five different versions of the iPhone Configuration Utility available on the apple.com site. Now there is only one and it's just a MAC install. Anyone know where the Windows installs went?

I think there are other brands that can do more than compete.
Depends what you compare them against. If it is pure hardware technical specification, then yes, there are other phones on the market that exceed the technical specifications of almost every individual iPhone feature.
However, Apple is not a purely hardware company. They spend at least as long, if not longer, on the software that runs on this hardware. And it is that combination of hardware and software that keeps Apple ahead.
What's the point in the most technologically advanced phone ever made, if the software to use it (user interface and operating system) is an absolute pig to use.
I'm lucky that I get to see and play around with most new phones that come out, including all the so-called "iPhone Killers" from Sony Ericsson, Nokia, HTC etc. etc.
So far, not one of them (despite having better technical specs in many cases) beats the iPhone in terms of the overall user experience - how easy, intuitive, seamless, slick and just plain enjoyable - the phones are to use.
The Sony Ericsson Xperia phones look great on paper and in the hand, but they are so annoying to use!! Unintuitive, sluggish, clunky. It's almost as though the software that runs these great bits of hardware is an afterthought, just done in the last few weeks before sale.

ITunes for Windows will not play the next song in the list

Hello,
I cannot get iTunes to play the next song in my list (general list, not a playlist). The random icon and/or repeat icon is not blue. Every time I press the next button (two arrows to the right), it picks another song from my list, instead of the one that is directly beneath the one that is playing.
I have iTunes version 11.0.1.12.
Has anyone have this happen before and how did you solve it? Thank you for all your replies.
Ilona T.

Hi TaylorFuhriman,
If you are having issues with video playback in iTunes for Windows, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

The latest itunes for windows will not install

I have an old PC running windows and I want to transfer my itunes songs to my ipad. I can't do this until I update iTunes but trying to update does nothing, either from iTunes or from the web page. I've tried rebooting the PC, still doesn't work. How do I get iTunes to update? Or, how do I transfer to the iPad without updating? The version of iTunes I have is older than 10.5, not sure where to find version #. Thanks!

Hi b noir, thanks for offering to help. i documented the whole process:
Itunes transfer from pc to ipad.
1. Connect ipad to PC
2. Pc recognizes ipad as a camera, gives me list of programs to launch, not sure if this has any relevance, no itunes on list, instead its kodak easyshare, ms doc wizard, ms camera sharing, ms word,mp navagator ex, omnipage, photoshop - I ignore this screen
3. Launch itunes, get screen, "ipad requires v 10.5 or later' go to itunes.com. I click ok
4. I get screen, still in itunes, "a new version (10.7) is available." I click download.
5. That screen goes away but nothing happens. No download starts.
6. Checked itunes folder on my hard drive, no sign that anything new has downloaded
7. Launch safari, go to itunes.com, hit download button
8. Nothing seems to be happening.
9. I get "thank you for downloading itunes" screen.
10. Still nothing new in itunes folder.
11. Get AVG screen telling me to restart my pc to finish download process.
12. During shutdown, I get screen,"the instruction at 0x100066dd referenced memory at 0x100066dd. The instruction could not be read." Gave me options to terminate program or debug. I did not choose either. No idea if this is relevant.
13. PC rebooted anyway.
14. Launched itunes
15. Got same message as before - "ipad requires v 10.5 or later' go to itunes.com. I click ok
16. Even though ipad is plugged in all this time, the screen that thinks the ipad is a camera does not come up this time.
17. There is nothing to the left of the itunes interface that lists devices - this is where ipad would appear, right?
18. Ipad appears on My Computer control panel
19. My version of itunes is 10.3.1.55
20. In itunes, i go to Help - Run Diagnostics - run all but Cd/Dvdtest
21. Secure Link to Itunes store failed, everything before that is ok. I click Help. nothing happens. Store appears in itunes so I don't see why this would fail.
22. Since help doesn't work, I move on in test. Two more fail screens: itunes helper not running, no ipad found. help brings up appropriate pages for both. Both recommend removing and reinstalling itunes.
23. Device sync also fails.
If it would be quickest to delete and reinstall itunes, I am willing to do that. My music would not be deleted correct? What about playlists (not as important to me).
I also have all my music backed up to CD. It would be tedious to copy that all to ipad, but if there is a way to do it and no other option, I could do that.
Sally

The "none of your preferred networks are available" setup window will not close

I (obviously) am set up on the internet but there is a setup window that stays on top of the screen saying none of my preferred networks are available and will not go away. My mouse will not click in it to cancel, choose a network etc. How do I get rid of this?
Thank you,
Alice

Is this in system preferences/networks? If so try a force quit press OPTION COMMAND ESC from the menu that pops up select the offender and clcik force quit.
Try rebooting.

I cannot get anything to work with the iPhone Configuration Utility

I have to set up 30 ipad 2's with restrictions set on them for the students...i created the configuration profile and click install and nothing happens...i have been to the extensive (two article) help tutorial...i have done everything it says to do...i cannot email the config to them because we don't want them using email...so not wanting to set up 30 ipads with an email addy...was wondering if there was another program with better tech support articles and is easy to set up and use...this is kinda useless...

Jaheedi, it sounds like you've tried a lot to make this work....my experience has been that in mlost cases if a profile fails to install it is usually due to a required payload not having been configured. It can happen if a payload category gets opened(General for example) inadvertently and then payloads within that category are not completed.(Identifier for example), then the profile will fail to install. Also, I've only got it to reliably work over a USB connection ( we use encrypted profiles with a "with authentication" removal option).....you might try installing a very basic profile with just the General Payload category expanded ( and required payloads completed) and see if that works..if that works, it probably is one of the other categories is incomplete. If you haven't tried the above, I hope this helps a bit.

How do I duplicate a configuration profile in the iPhone Configuration Utility?

I have over 60 iPad 3 which need configuring. I want a configuration profile for each one (each one will have a unique email setup on each profile)
I would like to be able to duplicate a profile or something which is much faster than creating a whole new profile for each one

Just answered my own question:
Select configuration profile, go to file and duplicate

After IOS 8 the iphone 5C wants to connect to itunes. It will not connect

I installed IOS8 and my iPhone 5C is showing a need to connect to iTunes. When I plug it into my computer, iTunes does not recognise the phone. All functions are not available now except the connect to iTunes field

Same problem... Need my phone for tomorrow and just wanted to get ios8 and then this happens... Don't want to lose my photos... Why should I be forced to recover... Any answers?

Was advised to delete system configuration file from hard drive and now computer will not start - any help would be appreciated.

Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.

Boot the MBP with the OPTION+COMMAND+R keys down. The result should be a display showing a revolving globe. By following the instructions, you will be able to reinstall the original OSX. Then you may reinstall Yosemite.
A solid Internet connection will be required.
Ciao.

IPad2 w/iPhone Configuration Utility wont install profile

I'm trying to use the iPhone Configuration Utility 3.6.2 from a windows 7 SP1 on an iPad2 running iOS 7.0.3 (11B511) but when I try to install a profile nothing seems to respond. I don't get any feed back on the iPad or from iPhone Configuration Utility. I know the name is iPhone Configuration Utility but from what iv read it it compatible with iPads aswell. I need this or something like this to keep the iPad from auto-connecting to open Wi-Fi in a businesses environment. Its not as easy and putting a password on the open Wi-Fi signals because we do not control the other businesses around the one we support. Forgetting the connection also wont work once the iPad looses connection with the correct Wi-Fi and is looking to reconnect.
This is what's in the console after trying to install the profile.
==== Attached at 6/6/2014 1:56:47 PM ====
Jun 6 13:44:20 Preferences[111] <Warning>: -[APNetworksController isVisible]: _visible(1), _formSheetVisibile(0)
Jun 6 13:44:20 Preferences[111] <Warning>: -[APNetworksController updateCurrentNetworkUI]: currentTrackedNetworkSSID(HH), currentNetworkSSID(HH)
Jun 6 13:44:20 Preferences[111] <Warning>: -[APNetworksController updateCurrentNetworkUI]: Current == Tracked, nothing to do but reload the specifier
Jun 6 13:44:21 Preferences[111] <Warning>: void unloadAPTableCellImages(): unloading images
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:44:36 Preferences[111] <Warning>: Scan error: Error Domain=com.apple.softwareupdateservices.errors Code=40 "The operation couldnt be completed. (com.apple.softwareupdateservices.errors error 40.)" UserInfo=0x165cb010 {NSUnderlyingError=0x179e5000 "The operation couldnt be completed. (ASError error 22 - Unable to copy asset information)"}
Jun 6 13:44:36 kernel[0] <Debug>: 085768.801757 wlan.A[615] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 100, fAverageRSSI -67
Jun 6 13:44:40 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:44:40 itunescloudd[88] <Warning>: Updating media purchase history for periodic poll...
Jun 6 13:44:40 itunescloudd[88] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:44:40 syncdefaultsd[288] <Notice>: (Note ) SYDAccount: no account
Jun 6 13:45:10 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:45:10 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:45:10 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:45:10 timed[18] <Notice>: (Warn ) CoreTime: Unable to fetch NTP time.
Jun 6 13:45:11 syncdefaultsd[288] <Notice>: (Warn ) Initial test for reachability failed. Let's mark service as unreachable for now
Jun 6 13:45:12 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:45:17 imagent[56] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
Jun 6 13:45:17 imagent[56] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init.ess.apple.com/WebObjects/VCInit.woa/wa/getBag?ix=1
Jun 6 13:45:17 identityservicesd[54] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init.ess.apple.com/WebObjects/VCInit.woa/wa/getBag?ix=1
Jun 6 13:45:40 itunescloudd[88] <Warning>: Jalisco periodic update failed with error Error Domain=JaliscoImporterErrorDomain Code=-1 "The operation couldnt be completed. (JaliscoImporterErrorDomain error -1.)", trying again tomorrow.
Jun 6 13:45:40 itunescloudd[88] <Warning>: Jalisco periodic update failed with error Error Domain=JaliscoImporterErrorDomain Code=-1 "The operation couldnt be completed. (JaliscoImporterErrorDomain error -1.)", trying again tomorrow.
Jun 6 13:45:42 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:45:42 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:45:42 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:45:42 timed[18] <Notice>: (Warn ) CoreTime: Unable to fetch NTP time.
Jun 6 13:45:44 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:46:14 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:46:14 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:46:14 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:46:14 timed[18] <Notice>: (Warn ) CoreTime: Unable to fetch NTP time.
Jun 6 13:46:17 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:46:47 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:46:47 timed[18] <Notice>: (Error) CoreTime: Failed to fetch NTP time.
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: Received source unavailable from "NTP"
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: Not setting system time to 06/06/2014 20:46:47 from NTP because time is unchanged
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 37.77hrs.
Jun 6 13:48:19 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:48:19 kernel[0] <Debug>: 085992.575822 wlan.N[616] AppleBCMWLANNetManager::handleDeauth():    status = 0 , reason = 6, flags = 0x0, authtype = 0, addr = d8:eb:97:ab:51:48
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587416 wlan.N[617] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587541 wlan.N[618] [tearDownLink] AppleBCMWLAN Left BSS(down):   @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=244 ssid[ 2]='HH'
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587681 wlan.A[619] Active Ports:
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587797 wlan.A[620] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:48:19 kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jun 6 13:48:19 kernel[0] <Debug>: en0::stopOutputQueues
Jun 6 13:48:19 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:48:19 kernel[0] <Debug>: 085992.588593 wlan.A[621] AppleBCMWLANNetManager::resetLinkQualityMetrics(): Report LQM as -2
Jun 6 13:48:19 Preferences[111] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Jun 6 13:48:19 Preferences[111] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x166cdb10:<VPNBundleController: 0x166cdb10>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Jun 6 13:48:19 kernel[0] <Debug>: 085992.635542 wlan.A[622] AppleBCMWLANCore::setProperties(): Active during sleep supported (false)
Jun 6 13:48:19 kernel[0] <Debug>: 085992.819125 wlan.N[623] AppleBCMWLANCore::setASSOCIATE(): [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate    .
Jun 6 13:48:19 kernel[0] <Debug>: 085992.861776 wlan.N[624] AppleBCMWLANCore::resetAutoCountry(): EnhancedLocaleEnabled: 0, HostCountry:0, fDefaultCountryCode:XZ, fCurrentCountryCode:XZ
Jun 6 13:48:19 kernel[0] <Debug>: 085992.990914 wlan.N[625] AppleBCMWLANJoinManager::join Beacon Info: @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-49 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:48:19 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224374 wlan.A[626] Active Ports:
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224496 wlan.A[627] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224603 wlan.A[628] AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224716 wlan.N[629] [bringUpLink] AppleBCMWLAN Joined BSS:     @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-49 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224833 wlan.A[630] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 50, fAverageRSSI -85
Jun 6 13:48:20 kernel[0] <Debug>: AirPort: Link Up on en0
Jun 6 13:48:20 kernel[0] <Debug>: en0::startOutputQueues (0)
Jun 6 13:48:20 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:48:20 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:48:20 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:48:20 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:48:20 kernel[0] <Debug>: 085993.277251 wlan.A[631] AppleBCMWLANCore::setProperties(): Active during sleep supported (true)
Jun 6 13:48:20 kernel[0] <Debug>: 085993.288500 wlan.N[632] AppleBCMWLANCore::startRoamScan(): 3596 Delaying RoamScan; because Join Mgr Busy 1 isWaitingforIP 1
Jun 6 13:48:20 kernel[0] <Debug>: 085993.540234 wlan.N[633] AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6 WLC_SUP_KEYED, reason = 0 Other reason, flags = 0x0, authtype = 0, addr = 00:00:00:00:00:27
Jun 6 13:49:44 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:49:44 kernel[0] <Debug>: 086003.225683 wlan.N[634] AppleBCMWLANCore::checkIPv4AddressValidity(): Local IPv4 address 192.168.30.201
Jun 6 13:49:44 kernel[0] <Debug>: 086003.234526 wlan.A[635] AppleBCMWLANNetManager::receivedIPv4Address(): Received address 192.168.30.201, entering powersave mode 2
Jun 6 13:49:44 kernel[0] <Debug>: 086003.256205 wlan.N[636] AppleBCMWLANCore::startRoamScan(): 3610 starting RoamScan; MultiAPEnv:0 isdualBand:1 isOn5G:0
Jun 6 13:49:44 kernel[0] <Debug>: 086008.291336 wlan.A[637] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 100, fAverageRSSI -70
Jun 6 13:49:44 kernel[0] <Debug>: 086077.572850 wlan.N[638] AppleBCMWLANNetManager::handleDeauth():    status = 0 , reason = 6, flags = 0x0, authtype = 0, addr = d8:eb:97:ab:51:48
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584361 wlan.N[639] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584486 wlan.N[640] [tearDownLink] AppleBCMWLAN Left BSS(down):   @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-49 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584625 wlan.A[641] Active Ports:
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584739 wlan.A[642] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:49:44 kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jun 6 13:49:44 kernel[0] <Debug>: en0::stopOutputQueues
Jun 6 13:49:44 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:49:44 kernel[0] <Debug>: 086077.585529 wlan.A[643] AppleBCMWLANNetManager::resetLinkQualityMetrics(): Report LQM as -2
Jun 6 13:49:44 Preferences[111] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Jun 6 13:49:44 Preferences[111] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x166cdb10:<VPNBundleController: 0x166cdb10>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Jun 6 13:49:44 kernel[0] <Debug>: 086077.631113 wlan.A[644] AppleBCMWLANCore::setProperties(): Active during sleep supported (false)
Jun 6 13:49:44 kernel[0] <Debug>: 086077.822276 wlan.N[645] AppleBCMWLANCore::setASSOCIATE(): [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate    .
Jun 6 13:49:44 kernel[0] <Debug>: 086077.879917 wlan.N[646] AppleBCMWLANCore::resetAutoCountry(): EnhancedLocaleEnabled: 0, HostCountry:0, fDefaultCountryCode:XZ, fCurrentCountryCode:XZ
Jun 6 13:49:44 kernel[0] <Debug>: 086078.014398 wlan.N[647] AppleBCMWLANJoinManager::join Beacon Info: @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:49:44 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249466 wlan.A[648] Active Ports:
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249590 wlan.A[649] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249673 wlan.A[650] AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249784 wlan.N[651] [bringUpLink] AppleBCMWLAN Joined BSS:     @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249902 wlan.A[652] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 50, fAverageRSSI -85
Jun 6 13:49:45 kernel[0] <Debug>: AirPort: Link Up on en0
Jun 6 13:49:45 kernel[0] <Debug>: en0::startOutputQueues (0)
Jun 6 13:49:45 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:49:45 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:49:45 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:49:45 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:49:45 kernel[0] <Debug>: 086078.283974 wlan.N[653] AppleBCMWLANCore::startRoamScan(): 3596 Delaying RoamScan; because Join Mgr Busy 1 isWaitingforIP 1
Jun 6 13:49:45 kernel[0] <Debug>: 086078.304788 wlan.A[654] AppleBCMWLANCore::setProperties(): Active during sleep supported (true)
Jun 6 13:49:45 kernel[0] <Debug>: 086078.559194 wlan.N[655] AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6 WLC_SUP_KEYED, reason = 0 Other reason, flags = 0x0, authtype = 0, addr = 00:00:00:00:00:49
Jun 6 13:50:19 SCHelper[289] <Notice>: active (but IDLE) sessions
Jun 6 13:50:19 kernel[0] <Debug>: 086088.250755 wlan.N[656] AppleBCMWLANCore::checkIPv4AddressValidity(): Local IPv4 address 192.168.30.201
Jun 6 13:50:19 kernel[0] <Debug>: 086088.259534 wlan.A[657] AppleBCMWLANNetManager::receivedIPv4Address(): Received address 192.168.30.201, entering powersave mode 2
Jun 6 13:50:19 kernel[0] <Debug>: 086088.268403 wlan.N[658] AppleBCMWLANCore::startRoamScan(): 3610 starting RoamScan; MultiAPEnv:0 isdualBand:1 isOn5G:0
Jun 6 13:50:19 kernel[0] <Debug>: 086098.326623 wlan.A[659] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 100, fAverageRSSI -66
Jun 6 13:50:19 SCHelper[289] <Notice>:   0x16e4c220 {port = 0x1803, caller = Preferences(111):MobileVPN, path = /Library/Preferences/SystemConfiguration/preferences.plist}
Jun 6 13:51:09 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:51:09 kernel[0] <Debug>: 086162.568087 wlan.N[660] AppleBCMWLANNetManager::handleDeauth():    status = 0 , reason = 3, flags = 0x0, authtype = 0, addr = d8:eb:97:ab:51:48
Jun 6 13:51:09 kernel[0] <Debug>: 086162.571402 wlan.N[661] Removing any beacons matching:    @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:51:09 kernel[0] <Debug>: 086162.571530 wlan.N[662] Also removing matching beacon:    @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580290 wlan.N[663] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580409 wlan.N[664] [tearDownLink] AppleBCMWLAN Left BSS(down):   @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580547 wlan.A[665] Active Ports:
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580662 wlan.A[666] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:51:09 kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jun 6 13:51:09 kernel[0] <Debug>: en0::stopOutputQueues
Jun 6 13:51:09 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:51:09 kernel[0] <Debug>: 086162.581438 wlan.A[667] AppleBCMWLANNetManager::resetLinkQualityMetrics(): Report LQM as -2
Jun 6 13:51:09 kernel[0] <Debug>: 086162.646751 wlan.A[668] AppleBCMWLANCore::setProperties(): Active during sleep supported (false)
Jun 6 13:51:10 kernel[0] <Debug>: 086163.643552 wlan.N[669] AppleBCMWLANCore::handleIPv4AddressNotificationGated(): Local IPv4 address 0.0.0.0
Jun 6 13:51:10 configd[55] <Notice>: Captive: CNPluginHandler en0: Inactive
Jun 6 13:51:10 configd[55] <Notice>: network changed: v4(en0-:192.168.30.201) DNS- Proxy-
Jun 6 13:52:50 Preferences[111] <Warning>: void loadAPTableCellImages(): loading images
Jun 6 13:52:50 Preferences[111] <Warning>: -[APNetworksController updateCurrentNetworkUI]: currentTrackedNetworkSSID((null)), currentNetworkSSID((null))
Jun 6 13:52:51 profiled[290] <Notice>: (Note ) profiled: Service starting...
Jun 6 13:53:02 profiled[290] <Notice>: (Note ) profiled: Service stopping.
Jun 6 13:53:28 Preferences[111] <Warning>: void unloadAPTableCellImages(): unloading images
Jun 6 13:53:29 Preferences[111] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:53:29 Preferences[111] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:53:29 Preferences[111] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:54:49 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 15 usbHostConnected true pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:54:49 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 16 usbHostConnected true pairableHostConnected true unpairedPtpAllowed false
Jun 6 13:54:49 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableDetect 1
Jun 6 13:54:49 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableType USBHost
Jun 6 13:54:49 ptpd[291] <Error>: ptpd: startResponder
Jun 6 13:54:49 ptpd[291] <Notice>: Photo library available
Jun 6 13:54:49 ptpd[291] <Notice>: PTP interface has been activated at high speed.
Jun 6 13:54:50 lockdownd[51] <Notice>: 00201000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:54:50 lockdownd[51] <Notice>: 00201000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:54:50 lockdownd[51] <Notice>: 00201000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:54:50 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:54:50 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:54:50 mc_mobile_tunnel[293] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:54:50 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:54:50 mc_mobile_tunnel[294] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:54:54 lockdownd[51] <Notice>: 019c5000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:54:54 lockdownd[51] <Notice>: 019c5000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:54:54 lockdownd[51] <Notice>: 019c5000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Received time 06/06/2014 20:55:2160.00 from "MobileLockdown"
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Not setting system time to 06/06/2014 20:54:55 from NTP because time is unchanged
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 37.64hrs.
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Received timezone "America/Los_Angeles" from "MobileLockdown"
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Current mcc: '0' simulated:'0'.
Jun 6 13:54:55 SpringBoard[33] <Notice>: 2014-06-06 13:54:55.113|33|0x17d09ca0: Region monitoring not available or enabled. Trigger ignored!
Jun 6 13:54:55 lockdownd[51] <Notice>: 01ac9000 __copy_itunes_value_block_invoke: com.apple.mobile.iTunes.store/downloaded-apps -> (null)
Jun 6 13:54:56 accountsd[79] <Notice>: 2014-06-06 13:54:56.199 accountsd[79:3947]: Cannot check access to a private account type: (null)
Jun 6 13:54:56 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:54:56 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:54:56 atc[296] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:54:56 atc[296] <Notice>: PLMigrationLog <t:0x1659bbc0> loadFileSystemDataIntoDatabase called from +[PLPhotoLibrary _doFilesystemImportIfNeeded]
Jun 6 13:54:56 assetsd[103] <Notice>: PLMigrationLog <t:0x145a6670> loadFileSystemDataIntoDatabase called from -[PersistentURLTranslatorGatekeeper importFileSytemAssetsNoWaitHandler:connection:]
Jun 6 13:54:56 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:54:56 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:54:56 geod[262] <Warning>: Can't get bundle identifier for process 261
Jun 6 13:54:56 medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] ending transaction <__NSConcreteUUID 0x16d52500> 7FC7AC47-B9A4-4F1D-A704-2014CC662B4A. shouldCommit=0.
Jun 6 13:54:56 medialibraryd[89] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:54:56 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:54:56 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:54:56 deleted[261] <Error>: 0x387000 __DeleteLibrarian_block_invoke: unable to determine evictable space: The operation couldnt be completed. (LibrarianErrorDomain error 10 - Unable to configure the collection.)
Jun 6 13:55:00 mc_mobile_tunnel[293] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:00 mc_mobile_tunnel[294] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:12 lockdownd[51] <Notice>: 00201000 _select_socket: receive secure message timeout!
Jun 6 13:55:16 com.apple.launchd[1] <Notice>: (com.apple.iCloudKeychainStats) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
Jun 6 13:55:16 com.apple.launchd[1] <Notice>: (com.apple.iCloudKeychainStats) Job failed to exec(3) for weird reason: 2
Jun 6 13:55:16 geocorrectiond[300] <Warning>: /SourceCache/Maps/Maps-1398.27.4/iOS/geocorrectiond/MCAddressCorrector.m:119 0x17555570 startProcessing - failed. Not authorized (0)
Jun 6 13:55:16 syncdefaultsd[301] <Notice>: (Note ) SYDAccount: no account
Jun 6 13:55:21 daily[302] <Notice>: (0x3d6e318c) carrousel: Could not rmdir /private/var/tmp/MediaCache: Directory not empty
Jun 6 13:55:21 daily[302] <Notice>: (0x3d6e318c) carrousel: Could not rmdir /private/var/tmp/launchd: Directory not empty
Jun 6 13:55:22 mobile_assertion_agent[257] <Notice>: service_one_connection: Connection closed for client (null).
Jun 6 13:55:32 lockdownd[51] <Notice>: 019c5000 _select_socket: receive secure message timeout!
Jun 6 13:55:32 lockdownd[51] <Notice>: 019c5000 _receive_message: walk away - non-SSL 1
Jun 6 13:55:37 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:55:37 mc_mobile_tunnel[303] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:55:42 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:55:42 mc_mobile_tunnel[304] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:55:42 profiled[305] <Notice>: (Note ) profiled: Service starting...
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: Profile MCConfigurationProfile 0x16d6f8b0 has no friendly name.
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: 0x16d6f8b0 Can't parse profile: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: Failed to parse profile data. Error: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: Profile cannot be queued for installation. Error: NSError:
Desc   : Invalid Profile
Sugg   : The profile Profile is invalid.
US Desc: Invalid Profile
US Sugg: The profile Profile is invalid.
Domain : MCInstallationErrorDomain
Code   : 4000
Type   : MCFatalError
...Underlying error:
NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:55:47 mc_mobile_tunnel[303] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:52 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:55:52 mc_mobile_tunnel[306] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:55:52 mc_mobile_tunnel[304] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:53 profiled[305] <Notice>: (Note ) profiled: Service stopping.
Jun 6 13:55:59 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 17 usbHostConnected false pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:55:59 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 18 usbHostConnected false pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:55:59 ptpd[291] <Notice>: PTP interface has been deactivated.
Jun 6 13:55:59 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableDetect 0
Jun 6 13:55:59 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableType Detached
Jun 6 13:55:59 kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService *, void *) - kMessageInterfaceWasDeActivated
Jun 6 13:55:59 kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
Jun 6 13:55:59 kernel[0] <Debug>: USB mux: 446 reads / 0 errors, 931 writes / 0 errors
Jun 6 13:55:59 kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
Jun 6 13:55:59 iapd[105] <Warning>: ERROR - /SourceCache/iapd/iapd-1385.3.1/iapd/IAPPortManager.mm:-[IAPPortManager availableCurrentFromAccInMa] - 228 IOAccessoryManagerGetUSBCurrentLimitBase failed 0xe00002d9
Jun 6 13:55:59 medialibraryd[89] <Warning>: {MediaLibrary} [MediaLibraryService] Cancelling any active or suspended import operations in progress for process <unknown process> (process ID = 296)
Jun 6 13:55:59 medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] Cleaning up any remaining transactions for ended process <unknown process> (process ID = 296)
Jun 6 13:56:02 mc_mobile_tunnel[306] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:18 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 19 usbHostConnected true pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:56:18 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 20 usbHostConnected true pairableHostConnected true unpairedPtpAllowed false
Jun 6 13:56:18 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableDetect 1
Jun 6 13:56:18 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableType USBHost
Jun 6 13:56:18 ptpd[307] <Error>: ptpd: startResponder
Jun 6 13:56:18 ptpd[307] <Notice>: Photo library available
Jun 6 13:56:18 ptpd[307] <Notice>: PTP interface has been activated at high speed.
Jun 6 13:56:18 lockdownd[51] <Notice>: 01943000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:56:18 lockdownd[51] <Notice>: 01943000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:56:18 lockdownd[51] <Notice>: 01943000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Received time 06/06/2014 20:56:4560.00 from "MobileLockdown"
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Not setting system time to 06/06/2014 20:56:18 from NTP because time is unchanged
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 37.61hrs.
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Received timezone "America/Los_Angeles" from "MobileLockdown"
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Current mcc: '0' simulated:'0'.
Jun 6 13:56:19 SpringBoard[33] <Notice>: 2014-06-06 13:56:19.016|33|0x199335a0: Region monitoring not available or enabled. Trigger ignored!
Jun 6 13:56:19 lockdownd[51] <Notice>: 01a47000 __copy_itunes_value_block_invoke: com.apple.mobile.iTunes.store/downloaded-apps -> (null)
Jun 6 13:56:20 accountsd[79] <Notice>: 2014-06-06 13:56:20.203 accountsd[79:10843]: Cannot check access to a private account type: (null)
Jun 6 13:56:20 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:56:20 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:56:20 atc[309] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:56:20 atc[309] <Notice>: PLMigrationLog <t:0x16e3fdf0> loadFileSystemDataIntoDatabase called from +[PLPhotoLibrary _doFilesystemImportIfNeeded]
Jun 6 13:56:20 assetsd[103] <Notice>: PLMigrationLog <t:0x145a6ad0> loadFileSystemDataIntoDatabase called from -[PersistentURLTranslatorGatekeeper importFileSytemAssetsNoWaitHandler:connection:]
Jun 6 13:56:20 lockdownd[51] <Notice>: 01ac9000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:56:20 lockdownd[51] <Notice>: 01ac9000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:56:20 lockdownd[51] <Notice>: 01ac9000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:56:20 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:56:20 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:56:20 geod[262] <Warning>: Can't get bundle identifier for process 261
Jun 6 13:56:20 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:20 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:20 medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] ending transaction <__NSConcreteUUID 0x16d552c0> 0BA65AAC-C5E8-4460-B229-CD5531260D09. shouldCommit=0.
Jun 6 13:56:20 medialibraryd[89] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:56:20 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:56:20 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:56:20 deleted[261] <Error>: 0x283000 __DeleteLibrarian_block_invoke: unable to determine evictable space: The operation couldnt be completed. (LibrarianErrorDomain error 10 - Unable to configure the collection.)
Jun 6 13:56:20 mc_mobile_tunnel[312] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:56:20 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:20 mc_mobile_tunnel[313] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:56:26 Chas-iPad lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:26 Chas-iPad mc_mobile_tunnel[314] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:56:30 Chas-iPad mc_mobile_tunnel[312] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:30 Chas-iPad mc_mobile_tunnel[313] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:36 Chas-iPad mc_mobile_tunnel[314] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:40 Chas-iPad lockdownd[51] <Notice>: 01943000 _select_socket: receive secure message timeout!
Jun 6 13:56:40 Chas-iPad lockdownd[51] <Notice>: 01943000 _receive_message: walk away - non-SSL 1
Jun 6 13:56:59 Chas-iPad awdd[318] <Error>: CoreLocation: CLClient is deprecated. Will be obsolete soon.
Jun 6 13:58:21 Chas-iPad medialibraryd[89] <Warning>: {MediaLibrary} [MediaLibraryService] Cancelling any active or suspended import operations in progress for process <unknown process> (process ID = 309)
Jun 6 13:58:21 Chas-iPad medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] Cleaning up any remaining transactions for ended process <unknown process> (process ID = 309)
Jun 6 13:59:09 Chas-iPad lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:59:09 Chas-iPad mc_mobile_tunnel[319] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Note ) profiled: Service starting...
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: Profile MCConfigurationProfile 0x1453bd60 has no friendly name.
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: 0x1453bd60 Can't parse profile: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: Failed to parse profile data. Error: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: Profile cannot be queued for installation. Error: NSError:
Desc   : Invalid Profile
Sugg   : The profile Profile is invalid.
US Desc: Invalid Profile
US Sugg: The profile Profile is invalid.
Domain : MCInstallationErrorDomain
Code   : 4000
Type   : MCFatalError
...Underlying error:
NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:59:19 Chas-iPad mc_mobile_tunnel[319] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:59:20 Chas-iPad profiled[320] <Notice>: (Note ) profiled: Service stopping.
Jun 6 14:06:17 Chas-iPad mobile_assertion_agent[257] <Notice>: service_one_connection: Connection closed for client (null).

Bump.
So i read that Apple hasnt updated the iPhone config utility for iOS7 (or at all for a while). Does anyone know of any other config utilities that would allow me to control wheather a Wi-Fi is auto connected to or not? We use iPads in a buinessness envornment and need to be able to connect to one Wi-Fi with other open Wi-Fi connections avalable (but not connected). forgetting an open network doesnt work because it will auto-connect if the iPad looses connection with the main Wi-Fi. Auto-connect should be an option on apple devices but isnt. we cannont be asked if we want to connect to an open Wi-Fi all the time.

HT4839 the iPhone Configuration Utility 3.6/2.2 for Windows will not start up/load anymore.

Similar Messages

Maybe you are looking for