HT4848 How do I create a Recovery System on my start up volume/hard drive?

So i discovered the article about using the Recovery Disk Assistant....but, I noticed it says that in order to create a Recovery on an external HD that it requires an existing Recovey System on my start up volume...I assume this means a Recovery partition on my startup hard drive? If someone could explain to me how to create one or if I already have one, I would great appreciate the help...
If its relevant I am using a
MacBook Pro Mid 2010
Core 2 Duo 2.4 Ghz
4GB RAM
Intel 120 GB SSD 320 Series

Hopefully you already have it. 
The only time a recovery partition can be created is during installation from mac app store, it's automatic and cannot be done manually. 

Similar Messages

  • How do I install the operating system Windows 7 on a new hard drive?

    Good morning ¿ how I can install windows 7 home premium on a new hard drive?, Disk damage has my laptop windows 7 home premium 32 bit and I have to buy a new hard drive, but not as I have already installed the new because I do not have installation CD because it is laptop, thanks. My laptop is a satellite L455-S5975 .
    For I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
    My English is not very good, excuse me if I do not understand.

    Satellite L455-S5975 
    I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
    There is no opportunity to download it, Richo. Your best bet is to have an acquaintance in the USA, Latin America, or Canada order the recovery discs and ship them to you.
    -Jerry

  • How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

    Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
    A.:
    1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
    2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
    3. Click on "Next" to continue.
    4. Click on "Advanced".
    5. Click on "Create an ISO file for the recovery disc".
    6. Select the destination where you want to create the ISO files. (Default is the D: drive)
    7. The program will now create the ISO files. This process may take up to 20 minutes.
    8. Click on "Finish". Make sure the box is unchecked.
    9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
    10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
    11. After burn is complete, click on "Close".
    12. Double-click the recovery_dvd2 file.
    13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
    14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

    Hi,
    You can order a replacement set of Recovery Discs using the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How do I create 2 Recovery partitions: one for Lion and one for Mountain Lion?

    Well that is basically the question:
    How do I create 2 recovery partitions: one for Lion and one for Mountain Lion?
    Reason is that I would like to keep the option to return to Lion, or even better, have a seperate partition for eacht?

    can I access my programs from the other partition, so I can save space ...
    No, as far as I know, each one is completely separate - especially if you're dealing with two different versions of OS's.
    is it possible to safely make an extra partion on a running drive (it is my main computer ...) The disk is large enough ...
    how large would this have to be
    I've personally never done it on a running drive - have read it's possible, but don't want to suggest it since I've never done it and wouldn't be sure about the steps. This is how I got to two partitions on my iMac:
    Originally, I had just one partition with Snow Leopard. I used CCC to clone that to an external drive. Booted into that drive and used DU to partition and erase the internal. I then cloned the new clone back. Also cloned the same thing to the other partition which I then upgraded to Lion. So I had two OS's - SL and Lion. I've now decided to clone my SL to an external drive for occasional use and installed ML on that partition - so now I have Lion and ML.
    There are two ways to get a "fresh" install: either download the OS again and install it on a partition of your choice or, as I've done as well, copy the installer to a safe place so you don't need to download it again. It does include whatever apps/software is included in the OS.  I've designated two smaller partitions on externals as my "fresh" installs of both Lion and ML for emergency or reinstall purposes (this is my way of dealing with not having install DVDs) - I took the time to install it there and then slowly add fresh installs of my important apps (either via download or install CD) - don't bother with the little/less used stuff, a current copy of that can be downloaded if and when I need it. I don't really update those two - that can also be done if/when I need it since that'll always change.
    So, yesterday, I decided I wanted to start fresh with ML - booted into my fresh install of Lion (on external), wiped the SL partition on my internal and installed Lion. Decided to download a fresh copy of the ML installer and installed that. Then ran Software Update. After that, repaired permissions. Then I methodically opened every third party app and checked for updates - installed those where necessary. After all that, I simply copied (drag 'n drop) my entire Documents folder (which contains all my important data,, photos, etc) over from another backup.
    This took a while, but mostly because of the long download times; the installs weren't all that bad. I should be running a really clean system now, especially since nothing was ported over except my Documents folder.

  • How do I create an archive system for a blog created with a custom app?

    I had to create a blog using a custom app, because I needed an image to show up in the list view (a feature I can't believe does not exist in the blog module). Anyways, I am wondering how can I create an archive system? Do I need to create categories for each month/year and then classify the post each time we create one. Then manually create links each month to pages that filters listing by that category? This is the system I tried, but I was wondering if there was a better way.
    Also, I would like to have a sidebar that shows all the authors/contributors of the blogs and have a count under their photo that shows how many blogs they have contributed to, and have this update dynamically each time they create a new post. I was wondering if a data source tag is the way to do this but I don't have enough information on how the data source tag even works, to really know how to do this.
    I have searched google for hours, and even signed up for BC gurus tutorials with no real luck. I thought BC gurus was going to have the answer but it wasn't quite detailed enough. Any help would be much appreciated. Thanks!

    You can use classifications but there is no auto feature to archive like that on web apps.
    In terms of the blog, Like I have said to everyone that has posted about blog preview images:
    http://www.prettypollution.com.au/business-catalyst-blog
    Just one example of an image at the start of the blog post rendering out, not hard at all.

  • How do I create a recovery partition on an HP EliteBook 2760p using Windows 7 64-bit Professional

    I have an HP EliteBook 2760p using Windows 7 - 64-bit Professional
    My original problem is that I couldn't create the Repair Disc
    I found out that the problem was with a file that was on the recovery partition
    I backed up the recovery partition from the same make and model computer
    I reformatted the partition and recovered the backup to the reformatted partition
    It didn't work
    How do I create the recovery partition  I have the 2 disks that came with the tablet PC

    If you do a factory restore using HP recovery discs it will put everything back including recovery partition. I don't know if any way to manually re-create the recovery partition.
    NOTE: back up your files as Factory Restore wipes ALL data.

  • I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
    He has made a comprehensive list, browse through them and decide which  suits your requirements.
    Have a nice day!

  • HT4527 My old pc ran windows vista and mother board failed but the hard drive was good. I have a new system now and installed the old hard drive. how do I get itunes and all my music working now?

    Hello, my old pc ran vista o.s. and the mother board died but the hard drive was good. I got a new system running windows7 and installed old hard drive to recover pictures and other data. How do I get my itunes and all my music back up and running.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7.

    How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7. I have the old hard drive hooked up as drive f. Can I copy and paste from old drive directory to new drive directory?

    You need to copy 2 files, key3.db and signons.sqlite, from the old [[profiles|profile folder]] to the profile folder on the new computer.

  • HT1199 I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

    I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

    Did you format the drive for Mac use before you tried to use it as a backup drive?
    Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app.

  • How do I get my MacBook Pro to recognize my Toshiba external hard drive?

    How do I get my MacBook Pro to recognize my Toshiba external hard drive? I'm working on transferring my music from our home computer to my new laptop and I already got all my music onto the hard drive but now, when I plug it into my MacBook Pro, it doesn't recognize it. There isn't an icon that pops up and nothing happens at all. The blue light on the hard drive that indicates that it knows it is plugged into something comes up but that's about it. Someone told me I might have to "format" it but I don't know what that means and I don't know how to do it. I just want to get my music from the hard drive to my laptop so please help!

    natgray17 wrote:
    I don't know about your first question... I went to finder, preferences, then general but I didn't see anything for the hard drive. 
    Huh, in the Finder menu, Preferences, you will see this:
    Nope, disk utility cannot see it. I've tried unplugging it and plugging it back in but it still won't recognize it.puter that's a Mac...
    If DU cannot see it then the preferences is just an academic exercise.
    If this is a USB drive then as mentioned above you may need a powered USB hub since there may not be enough power from the USB to run the drive.  What else do you have plugged into the USB ports?  If there's some stuff you can unplug it then do it and see if your drive mounts.
    What do you mean from a Windows machine? It's a Toshiba hard drive and I put my music on it from my home computer that's a Mac...
    Which is all I wanted to know, i.e., whether the drive came from a Winows machine.  So it's been formatted and created on a mac.  Therefore it should mount on this other mac machine.  So it most likely is a power problem.

  • System Profiler will not recognize installed hard drive if drive is in use by VMWare

    System Information will not recognize installed Hard Drive (Boot Camp) when in use by VMWare.
    I work in IT for a School District and I am creating a Script that system information about the computer. I am testing this on a Mac Pro with two internal hard drives. One drive is Mac OS 10.8 and the other drive is a Boot Camp Drive that is used by VMWare Fusion.
    When I run System Information via the GUI or system_profiler via Terminal, both drives show up just fine. However, if I launch VMWare Fusion and run Windows from my Boot Camp drive, then run System Information via the GUI or system_profiler via Terminal, the Boot Camp Drive is no longer listed as an installed drive.
    Example:
    In the Terminal, I enter the following command.
    system_profiler SPStorageDataType
    Then it returns this information.
    Storage:
        Lion Client:
          Available: 217.84 GB (217,836,306,432 bytes)
          Capacity: 639.28 GB (639,275,270,144 bytes)
          Mount Point: /
          File System: Journaled HFS+
          Writable: Yes
          Ignore Ownership: No
          BSD Name: disk0s2
          Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
          Physical Drive:
              Media Name: WDC WD6400AAKS-41H2B0 Media
              Medium Type: Rotational
              Protocol: SATA
              Internal: Yes
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. Status: Verified
        BOOTCAMP:
          Available: 255.58 GB (255,575,560,192 bytes)
          Capacity: 319.79 GB (319,790,510,080 bytes)
          Mount Point: /Volumes/BOOTCAMP
          File System: NTFS
          Writable: No
          Ignore Ownership: Yes
          BSD Name: disk1s2
          Volume UUID: D4B39D4E-E244-403C-AE4D-4D58397130DE
          Physical Drive:
              Media Name: WDC WD6400AAKS-41H2B0 Media
              Medium Type: Rotational
              Protocol: SATA
              Internal: Yes
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. Status: Verified
    Then I launch VMWare, which uses the Boot Camp drive. The once again run the same command from the Terminal Command and I get this.
    Storage:
        Lion Client:
          Available: 213.39 GB (213,392,244,736 bytes)
          Capacity: 639.28 GB (639,275,270,144 bytes)
          Mount Point: /
          File System: Journaled HFS+
          Writable: Yes
          Ignore Ownership: No
          BSD Name: disk0s2
          Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
          Physical Drive:
              Media Name: WDC WD6400AAKS-41H2B0 Media
              Medium Type: Rotational
              Protocol: SATA
              Internal: Yes
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. Status: Verified
    The Boot Camp Drive is no longer listed.
    I assume this is due to the the fact that the drive is "In Use" however is seems odd since the Mac drive is also in use and it appears without problem. I assume there is no "fix" for this, I was just wondering if someone may have an explaination why?
    Also, I do realize that I can query the various interface types like system_profiler SPSerialATADataType to get all the properly installed phycial drives, but then I would have to query all possible interface types, isolate only devices containing Volumes, then consoldate the information to just the information that I need. I was hoping for a cleaner query.

    Thank you for your response.
    VMWare may be the cause, but the actual issue I am having is with Apple's System Information. I anticipated resistance from VMWare if I went to them with a question about an Apple software issue (even though VMWare software is part of the equation). I was trying to avoid the inevitable finger pointing game. I thought I would try with Apple Forums first since the issues presents itself within the Apple Software. However, you are correct that VMWare may have an explanation on why Fusion might be interfering with System Information. I will check with them next.
    To answer your question. Yes, In most cases I do use Fusion to run Windows side-by-side with the Mac OS. However, that is not always the case. There are a few reasons why I have it setup using a Dual Boot configuration.
    One, in some cases, due to the intense programs I occasionally run (graphic applications), I prefer to simply boot straight into Windows via Boot Camp so I may allocate all hardware resources to Windows. Additionally, some graphic applications like to have direct access to hardware and the extra layer of the VM environment can cause problems when an application is trying to directly access specific hardware like a graphics card.
    Second, I often use either side, both Mac and PC, for testing. There is an advantage to not having to rely on the Mac OS to run Windows. If, for whatever reason, my Mac becomes unstable due to testing, I can still jump right into Windows to do work if necessary.
    Third, I love the Mac OS, but I work in a PC centric organization. If there is a "problem" with my system, it is too easy for other system admins to say, "it's because it's a Mac". Having the definitive separation of the OS's allows me to prove that the Mac OS is not a factor.

  • I reinstalled osx 10.8.2 from recovery disk, now verify disk says my hard drive is there but wont boot into it regardless which partition i select to boot into , everytime it boots me into the recovery, i need help!

    Mb pro running like garbage with 10.8.2 tried a reinstall of osx from recovery utility now the utility says my hard drive is ok but wont boot into it keeps booting me back into recovery tried restart option to select disk tried using the select startup disk from recovery, gives a message asking if i really want to boot to it and in that message is the only rime it shows a question mark on the drive dont know what to do cant find similar issue

    Your rushing and not making much sense.
    Your machine was running like garbage, so you tried to reinstall 10.8---did you do this or not?
    Disk Utility says your drive is ok, that's good.
    But when you boot it keeps booting Recovery HD, so perhaps the firmware has made a mistake, it can forget.
    You held the option key down to boot into Startup Manager, why didn't you select OS X for the boot volume?
    When you get into OS X you change the Startup Disk in System Preferences, that should take care of the Flashing Question mark issue.
    attemtping to ireinstall osx from recovery partition bar is full on install screen, but im now at -6hours remaining
    So now your reinstalling OS X like you set out to do before, it does take some time as it has to download from Apple's servers.
    If your Internet connection is slow and/or Wifi is slow then it will take awhile.
    So you should have the Flashing Question Mark and Reinstall Only OS X covered.
    You should be able to boot the machine, but your performance issues may be something else and still remain.
    Why is my computer slow?
    Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • I have a 10.4.11 system. Is there a suitable hard drive back up available.

    I have a 10.4.11 operating system and tried 2 back up hard drives but both have incompatible. Is there a suitable device available?

    You can use Carbon Copy Cloner - http://www.bombich.com/download.html just be sure to download version 3.4.7
    CCC is more than just a backup - it will make a fully bootable clone of your system.  Once completed, you can boot from the external CCC drive and you will be running your exact same system just as it was at the time you made the clone.  To restore from the clone, you would boot from it, and then run CCC in reverse - from the clone back to the internal hard drive.
    If you need to restore individual files, the clone volume mounts to your desktop like any other external volume, and you can drag and drop to copy the backup versions onto your internal hard disk folders.
    CCC will also make incremental updates once the original clone has been created.
    It has been a mainstay for OS X backup/cloning for many years now.

  • How can i save my individual playlist on itunes on my external hard drive because i want to buy a laptop and install itunes and move all my music and playlist thats on my desktop to my laptop and almost all my music is from a bunch of cd's i own

    how can i save my individual playlist on itunes on my external hard drive because i want to buy a laptop and install itunes and move all my music and playlist thats on my desktop to my laptop and almost all of my music is from a bunch of cds i own

    Hello ryane84
    The easiest and most efficient way to copy your music is to follow the steps under the External drive section. Make sure that you have organized the iTunes library first before you copy it over. Then put the copied iTunes folder in the same Music folder on your computer.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    Regards,
    -Norm G.

Maybe you are looking for

  • Error while running the XML file using XML Publisher Desktop

    Hi All, We have successfully loaded the XML file using XML Publisher Desktop.But when we try to preview it using the PDF format we are getting the following error. Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\font

  • SAP Portal Display Documents is hanging with Null Pointer Exception

    Hi I am having problems with an iview from the products section of SAP standard iviews In my portal page I have the following three iviews, find documents, display master data and display documents both the find docs and display master data work grea

  • Web camera fails to initialize, not in device manager

    Hi, I have a Satellite L650D with Windows 7 'Home Prem' and have recent issues with my webcam. All was running smoothly for a year or more until one day this error message appeared " Web camera initialization failed. Please restart application or com

  • Like exporting and importing a page

    hello, As the steps serian to follow to export a page of an application, soon to concern it in another application it gives an error me: This page was exported from a different application or from an application in different workspace. Page cannot be

  • Problem with IIS- WebLogic bridge

    Hi! We have configured the IIS-WebLogic bridge for WebLogic 6.0 (SP1), with IIS 4.0 on two separate machines. This works on URLs which directly refer to pages lying on the same machine as WebLogic, but some links which refer to WebLogic properties fi