HT4855 iMac mail open and mouse has frozen on screen, new batteries in mouse..no change. turning iMac off and back on ..no change. need advice asap
Imac mail open and mouse has frozen on screen...please advise?
The Mac uses an "All devices active" philosophy with pointing devices and keyboards.
If you have additional pointing devices attached, especially a graphics tablet, it is still directing mouse operations at the same time as the mouse you have your hand on. The end result is the SUM of commands from all such devices.
Similar Messages
-
when i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ??? please i need help with this and how can i fix it
Here is some pertinent information and how-to's from Apple:
http://support.apple.com/kb/TS2570
Post back if these troubleshooting steps do not work. -
Sound on my iPhone 4S is messed up, tips and suggestions left by others not working any more. At first turning it off for a while worked, when turned it back in the keyboard click would work for a few keystrokes but now not even that. Had the phone for a bit more than a year, so I know my sound is on and checked all my settings. Posted suggestions from support is not helpful. I guess next step is to take it in for repair? Or is this Apple's way of telling us to upgrade? :(
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
FYI, Apple does not repair iPhones. If basic troubleshooting does not resolve either purchase a new iPhone or take the device to Apple for an Out of Warranty replacement which is $199US for the 4S. -
When trying to install VS2012 SDK on Windows 8.1 get the error "Windows Program Compatibility mode is on. Turn it off and then try Setup again."
See my blog C# Bits | Twitter @sjnaughton Always seeking an elegant solution.Rick, Have you had any success with this? I'm also trying to run the tfs_VssUpgrade.exe tool on my Windows 8.1 machine and getting the same exception. Greatly appreciate any insight if you were able to get past this issue! Thanks, Steve
Same issue here.
This MS connect thread
is interesting however.
Posted by Microsoft on 9/19/2013 at 2:54 PM
Hello Alxandr,
Thank you for taking the time to submit this issue to Connect. This is a known issue with Windows 8.1 RTM and it will be addressed in a future update of Windows 8.1. In the meantime, you can typically rename the EXE to get it to work correctly. -
My Ipad 2 (after the latest update) is burning through battery...even when I am NOT on the Ipad2....I have turned it off and on again....no difference...what else can I try...seems like I live with it pluged into power.
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
recalibrate the battery, let the device run out of battery to where it shuts off and then fully charge it without using it. -
I havent used my iPod Mini in about a year, but last time I was on it worked. I have tried almost everything.
Sounds like your battery is failing. If you have AppleCare, make Genius reservation and take to Apple for resolution. If no coverage, you can still take to Apple Store for free quick battery diagnostic testing.
-
What can I do if they don't want to guide it back at me
Report it to the police. If they are a shop in the mall they should be easier to track down (the trick is seeing if the police will take the case).
In the future I would not deal with unauthorized shops. Only deal with Apple or AASPs (Apple Authorized Service Providers). It may cost more but you don't run the risk of getting scammed or having faulty work done. -
Why did my screen turned white after i turn it off and it wont reset or turn off
my i pod touch not sure wat software it resently has now i was using it and as soon as i was done doing something on it i turn it off and as soon asit did that the screen went blank and it wont reset or nothing
Let the battery fullu drain. After charging for at least an hour try a reset and restore.
-
I'm having problems with Siri on my iPhone 6. It worked briefly yesterday and now its not doing anything. I have turned phone off and on and made sure everything is on in settings. Please help!
Do you have an active data connection (wifi or cellular)? Have you tried resetting the phone by pressing and holding the Home and power buttons until the apple appears (this is different than just turning it off and back on).
-
Iphone 5c turns itself off and won't turn on until plugged in
I just received my replacement iPhone 5c and it worked fine the first night, the next day, the phone turned itself off, and would not let me turn it back on. I tried the reset option by holding down the lock and the home buttons, but that did not work. my phone only turns on when it is plugged in. It then shows me that battery is lows, and then powers on ad says 100% charged.
My lower screen blinks while it is plugged in as well.....
Any help?You might have a bad battery. But first try recalibrating the battery gauge. Run the battery all the way down until the phone shuts off and doesn't restart. Then charge for 4 hours with the wall charger. Repeat the process. If the problem remains you need a new battery.
-
Ive tried to update all my applications from my computer to my iphone4 and while my phone was trying to sync them. I have now an apple icon displayed on my phone and it has 'frozen up'. tried turning on and off but apple icon still remains. tried shutting down computer aswell as removing the Micro-Sim on my phone and still no change.. what is going on?
Plug in with Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually up to 20 seconds of holding both buttons.
If still problems and you decide to Restore the iPhone Firware. Then open iTunes on computer, connect iPhone to computer. Then hold both Home and Power buttons until the iPhone is recognized in Recovery Mode. Restore the Firware. Usually takes about 20 seconds of holding both buttons. -
Does anyone know how to unfreeze a screen.
My mini Ipad is only 2 months old and it has frozen. The screen says that the ipad needs to be backed up on icloud but the touch screen has frozen and I can even shut it down. SuggestionsTry to reboot it. Hold down the sleep and home keys until you see the silver apple, about 20 seconds or so. It should reboot and work for you.
-
I was moving bookmarks in safari and 2 complete folders have emptied their contents. The folders are still there. I don't have a working time machine and icloud has caused the relevant folders to disappear from all my machines, iPhone, iPad and iMac as well as thge MacBook Air I was working on. HELP!!!
Hi,
There is NO need to put your whole questing in the "Questing Heather" therefore you can TYPE here. In the Text window as I did to.
Now to your questing:
So, you moved some Bookmarks and now 2 folders are completely empty.
I think that they dropped in a other folder during dragging the Bookmarks.
Did you check ALL of you Bookmark folder if they are there?
If you didn't delete the they have to be still there.
Dimaxum -
I am updating my software on ipad and it has frozen...90% updated. I cannot turn off or reboot ! what can I do ?
Update frozen
1. Reset iPad
Hold the Sleep/Wake and Home button down (together) until you see the Apple Logo
2. If the above doesn't work, force iPad into Recovery Mode
http://support.apple.com/kb/ht1808
Note: Make sure battery is above 50% -
HT1379 iMac cant find mouse in the system preferences, new batteries and turned on
iMac cant find mouse in the system preferences, new batteries and turned on
Mouse seems like it just died. Waiting for bluetooth mouse to be discovered...just spins and spins.
Help pleasesimensen wrote:
I have a 2007 MacBook and a new Ipad Air. Is it possible to sync the two even though I don't have Icloud in my Macbook preferences?
Yes. You can use iTunes 11.
As noted, you need 10.7.5 to use iCloud though.
Maybe you are looking for
-
Collection inaccessible from Before Header process
Hi, I have a form based on the Matrix Order application. There's a collection-based report with a bunch of text fields that can be updated and a column with a "Remove" item that basically calls a conditional Before Header process to remove the item f
-
Creating a USB boot image for LabviewRT
I have installed Labview 8.2 and the "update 8.2.1" for Labview RT Standard version from the web. I am trying to create a bootable image for a target Laptop PC, using a USB jump drive. When I run NI-MAX and select TOOLS->RT Disk Utilities->Create Des
-
DRQ: Different default warehouse for Sales,Purchase and Production Process
Hi Experts, In my recent Implementation Project I realised that there should be provision of capturing and using different default warehouse for Sales,Purchase and Production. For example in manufacturing company 1. Default ware house for Purchase pr
-
Multiple connections in one app
Hi, I have a web app and am using JDev 10.1.3.2 with ADFBC. Some of the data will come from SQL2000 while other info will come from Oracle 10g. My UI will require presentation of a mix. But I am only able (it appears) to use one db connection in one
-
hi experts, i have a requirment like that , our client sending the invoices through idoc. my requirment is that, in the invoice now the name of the payer is printing ,but in that place it should print the contacat person name. could u please tell m