HT4859 can I backup to iCloud and my PC at the same time?

Would like the added protection of both, plus to sync music from my desktop

Welcome to the Apple community.
Whether you choose to back up to iCloud or to iTunes, it will not affect your ability to sync music from your iTunes library on your computer to your mobile device.
You cannot back up to iTunes and iCloud at the same time. However you can switch between where the backup is done as often as you want.

Similar Messages

  • Can you sync both iCloud and Google Calender at the same time?

    Hi all,
    I am an iCloud/MobileMe user, but have a Google Calender at work with other colleagues.
    Is it possible to sync both to my iPad/iPhone at the same time?
    I am yet to find a way to do this.
    Thanks

    tkoe wrote:
    Hi all,
    I am an iCloud/MobileMe user, but have a Google Calender at work with other colleagues.
    Is it possible to sync both to my iPad/iPhone at the same time?
    I am yet to find a way to do this.
    Thanks
    You can subscribe to both calendars on your iPhone/Pad etc, you can also subscribe to them on your Mac

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • Can oracle work in shared and dedicated mode at the same time?

    Hi All,
    can oracle work in shared and dedicated mode at the same time?
    Thanks

    A database can work only in one mode at a time.
    If the database is started in Dedicated Mode then it can not run in the Shared Mode. If you need to run it in the Shared Mode, bring down the Database , change DISPATCHERS, SHARED_SERVER, SHARED_SERVER_SESSIONS parameters in initfile and bring up the database to run it in Dedicated Mode.
    But there is one catch here, if you have started the database in Shared Server Mode even then you can make a Dedicated connection to server.
    Thanks!
    M-

  • Can I run a podcast and an app at the same time?

    Can I run a podcast and an app at the same time?

    Yes for most.  You can run a regular app with an audio podcast.  I do not know what could run with a video podcast.

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

    I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

    First restart your mac and try again.
    It could be
    that the router and the TC are interfering wirelessly with each other.
    You can check this by pressing the option key while clicking on the wireless icon on your screen
    Open Wireless Diagnostics
    enter your user password
    Press CMD 4 then Scan
    You will see all the wireless channels being used in your location and you can check if they are on the same channel
    Make the SSID for the TC simple like MyTC
    Set 5Ghz to auto
    Update the TC
    Try again
    Ted

  • Can i run remote profiling and remote debugging at the same time

    can i run remote profiling and remote debugging at the same time .
    i am using jdev9.0.5 and oc4j9.0.4 standalone server.

    i think i am wrong

  • How can I connect to Oracle and SQL server at the same time?

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]
    As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
    SQL Server table to an Oracle table.
    1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
    separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
    your Oracle sales rep about it.
    2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
    version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
    and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
    check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
    as well as a Heterogeneous Connectivity forum on this site.
    3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
    Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
    into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
    this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
    the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
    5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
    additional information.
    HTH

  • Can you capture 1 video and author another at the same time?

    To save time with videos that are not critical, can you capture one video to Premiere Pro at the same time you are authoring to Encore a previously captured video?

    Wilderness08 wrote:
    To save time with videos that are not critical, can you capture one video to Premiere Pro at the same time you are authoring to Encore a previously captured video?
    The short answer is yes.
    I have just done that and I am happy to report that it worked like a charm.
    I captured from a DVCAM tape via firewire using PPro CS6 while authoring a Blu-ray disk in Encore CS6.
    No frames were lost during capture and my test blu-ray project was completed without a hitch.

  • How can I record a microphone and software instrument at the same time in Garageband 10.0.1?  It seems I can record one or the other, but not both at the same time?

    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.  It seems that I can't record the mic input and the software instrument at the same time.  I can record the mic input by itself, and I can record the software instrument by itself (if I don't have a mic input track created), but I can't record them together.
    It seems like this should be an obvious thing to be able to do, but I can't figure out how to make it work.
    Can someone help?
    Thanks,
    Kurt

    Kurt1997 wrote:
    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.
    you need to "record enable" both tracks:
    http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can I use a usb and wireless keyboard at the same time on a mac pro

    I wish to use the Mac Pro USB keyboard for Logic shortcuts and the Mac Pro wireless keyboard for normal typing etc. Is this possible?

    Just as Matt has said, the Mac uses "all devices active" philosophy with keyboards and pointing devices. It does not automatically Switch to a later-installed device, it uses them ALL at the same time by default.

  • Can you listen to tunes and watch slideshow at the same time?

    Just wondering if there is a way to play tunes and watch the slideshow at the same time. This would be great when showing a slideshow on a TV screen with tunes playing in the background.
    If not, I would have to make a slideshow in iMovie with a sound track and load that into the iPod.

    Yes.
    Go into slideshow settings > Music > and select a playlist.
    Then, select a photo library, and press PLAY.
    Cheers!
    -Bryan

  • How can I have a canvas and external controls at the same time?

    Typically all the space of an applet is used for 2D or 3D; that is, the applet provides the canvas. I am trying to develop an applet where I only want to use part of the applet space for 3D, and then, outside that space (but still within the applet) I would like to add some controls (e.g. buttons or text fields) to provide some interaction. In other words, I want to have an applet that contains something like a frame for 3D, and some controls outside the frame.
    It may be quite easy, but I am very new to applets. Can anyone kindly give me some suggestions? Any help is highly appreciated!
    Regards,
    Hua

    I got it figured out. Thanks anyway!

  • Can't print to ethernet and use airport at the same time

    I have a Kyocera 6950 printer connected to my Powerbook via ethernet, this works fine (using bonjour). However as soon as I switch airport on and connect to a wireless network, jobs no longer goes to the printer and the Powerbook reports it can't find the printer.
    So far I have tried:
    1. changing the service order in the network control panel
    2. deleting the printer and re-creating it, I can see the printer (via bonjour) and re-create it, but still not print to it.
    This has happened at several different locations, anybody else had this or got any ideas. The problem started with Snow Leopard
    Many thanks
    Regards
    Dave Hage

    Thanks Greg,
    I was wondering if maybe it needed to be on another subnet but there seems little information regarding setting up PostScript printers on ethernet and it was very late so I'd given up messing around with it all last night. I've got most addresses set manually, apart from Airport which is assigned by the router with different addresses permanently allocated to different computers etc. Not to worry! I have a Time Capsule to set up with my new Mac and will try with the printer attached to that. The silly thing is that it works fine with Airport switched on when attached to my older Mac Mini running Leopard, both direct through that computer or accessed from another one.
    Can't have printers attached to my router as there's no room for them in the hallway where the router is connected to the internet. Some experimentation is in order now I think!

Maybe you are looking for