HT4859 during upgrade my iphone, it restareted then cannot run. Only the apple icon appears then disappear. I cannot restart it or do any thing.
during upgrade my iphone, it restareted then cannot run. Only the apple icon appears then disappear. I cannot restart it or do any thing.
Dude or hot-spur,
Not fishy at all!!!! You really think I would have taken any more of my time to post a bogus rant? We'll no, it is unfortunately all true. I want to hear from anyone who is experiencing such problems not anyone else that wants to put there two cents in. I really don't need anymore hate or negativity. Just people's experiences because I feel like I am the only one having so many problems. Thank you
Yes, I have had some unfortunate bad luck to have so many problems at the same time, but some of them are just things you cannot do on the new OS.
Thank you again
Similar Messages
-
My iphone 4s will not switch on only the apple icon is showing
my iphone 4s will not switch on only the apple icon is showing
Hello jakkob6,
The following article provides information and steps which can help get your iPhone working again.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
My iPad is not charging. the apple icon appears followed by battery icon and then it repeats.
My iPad is not charging. The apple icon appears followed by battery icon and then it repeats.
Hi lyndaem,
Welcome to the Apple Support Communities!
If you are experiencing issues with charging your iPad battery, please refer to the attached article. The information in the Resolving issues section will help you isolate the situation.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Have a great day,
Joe -
i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!
That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.
-
Why does the Apple logo appears and disappears when I'm the iphone 4?
When I'm using iphone 4 the Apple logo appears and disappears and appears lock screen. What to do? It' s a bug or a hardware problem?
Hi sarasalves,
Welcome to the Support Communities!
If the Apple logo is flashing on your iPhone 4, you may need to put the iPhone in recovery mode so that you can restore it. The article below explains how:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
I hope this information helps ....
- Judy -
So just like last time I tried to update my iPhone software...MY PHONE IS FROZEN. Displaying iTunes icon and a USB cable I pressed the Power button and the menu botton together until the apple icon appeared held them down for 10 secs & NOTHING Now what? Do I just wait for the battery to run out?
Hi Careesa,
Your iPhone is in recovery mode-- you need to connect it to your computer and, most likely, iTunes will ask you to restore it. If you recently backed up this shouldn't be too much of a problem. -
My iphone won't start only the apple icon is appearing
hello guys
there was a problem on my iphone. its not getting started only the apply icon is appearing on the screen. my battery is not empty because i had just finish charging my iphone...please help me..Plug into iTunes and restore. If it is not recognised by iTunes unplug it then hold down both the Home and Power buttons until you see the screen blackout. Now continue to hold the home button while you plug it in via usb. It will enter "recovery mode" and will show a connect to iTunes screen. Follow the prompts to restore your firmware and restore your data from a backup
-
The apple icon appears every 15 seconds but the iPhone never boots. What does this mean?
The iphone 3GS was in an otter box--in a pocket--and went in a mudbath for a couple of minutes. Yes, really. None of the water sensors turned pink on the phone and now, two days later, the apple icon pulses on and off every 15 seconds when the phone is hooked into a USB cable to charge. What does this mean and what should I do?
It looks as if there's a problem with your GPU. With a Retina machine, that would mean replacement of just about everything, except, perhaps, the flash storage drive.
Print you kernel panic when you go to your Apple Store appointment. I'm betting that it's a faulty GPU but they will be able to diagnose exactly where the problem lies.
Good luck,
Clinton -
my iphone4s blackout.. I tried the on/off and home botton and only apple sign appears and then blackout again.. What should I do?
OP has posted twice already responded to post that was correctly in this forum which included fact that it had been immersed in water ...........................
-
My iphone will no longer come one. The apple will appear on screen then disapear what should I do
My iphone will no longer come on, the apple will blink on and off but that is all I get
I suggest connecting the iPhone to the computer and iTunes and do a restore. If you are unable to do that, you may need to put the iPhone in DFU mode. Search for directions on that.
-
HT201263 only the apple logo appear iphone 4
I can't turn on the phone, i've tired holding the button and on button down for 10 sec, tired download the software again. Took out and in the sim.
Nothing works, now the apple logo just appears
HELP!!If the phone is off, hold down the home button. While holding down the home button, connect it to iTunes. Don't let go of the home button til you see a message in iTunes that says an iPhone in recovery mode has been detected.
-
I need this to work...my daughter is going crazy without it...any other suggestions???
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Please help!! I have tried to reset my ipad. nothing is working. I tried uninstalling and reinstalling itunes. it says there is an error when trying to connect ipad with itunes.
Try and force the iOS device into Recovery Mode:
http://support.apple.com/kb/ht1808
1. Turn off device
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to device
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected the device in recovery mode"
8. Use iTune to restore device
Note: You need to be patient and repeat the above many times to recover your device
Here's a link that discusses recover mode: http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm -
although it is doing what i asked it to do, i want it to charge, ok so it does it... although when i turn it on it's as if it's either not charged at all but only enough to have the apple icon on my ipod, once it's had enough (which is like, a minute) it switches itself off and carries on charging, sometimes it switches itself on but this just takes it back to step one. also, when i connect my device to the USB port itunes does not recognise it for some reason, i've updated the newest version of itunes recently and i've tried annother ipod on annother computer with the same USB cable, so it's either the newest version of itunes, my ipod or my computer. please help
P.S,
i do have the required version of windows for this to work, my computer isn't a mac, it's a pc, hope this helps...how long have you had your ipod? mine did the same but after a while you need to get a new one because of the battery...
-
I had just checked my phone and it had 41% battery life left. A few minutes later, it simply went blank and won't do anything. I tried reseting it by pushing down on the wake/sleep button and the button on top until the Apple logo appeared, but that didn't help. Any ideas?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
GR using HUs but without a PO or Inbound Delivery
Hello. How do we perform a GR for finished product with out a PO but also have the HU control. For instance, we typicaly receive finished product using a COWBHUWE, that is linked to an order. In essence, we performed the manufacturing of this prod
-
Export Web Application [EXPORT] Command in WAD
HI Gurus, Here is a strange problem. I would like a real solution because I've read just about any documentation there is out there. So, thanks for thoughtful answers in advance. We created a custom template ZZANALYSIS_PATTERN off of SAP delivered st
-
JDAPI - method getAttachedLibraries does not get all attached libraries
Hello, i've a strange behavior while using JDAPI to list all Libraries attached to forms. I've the following code: Jdapi.startup(true, true, true); String startModule = new String("c:\\test.fmb"); FormModule fmd = FormModule.open(startModule); System
-
Copy Controls for Deliveries to Billing doc's
Hi I hope someone can shed some light on this issue i have. I have six deliveries, that i need billing, same plant, same sold to, diff mats, diff del dates. My current routines plit these into 6 invoices, but we want one invoice for he lot, i have ta
-
How do you fix a msvcr80.dll error when trying to install itunes 11.1.4
How do you fix a msvcr80.dll error when trying to install itunes 11.1.4?