HT4859 get info from icloud on different device

lost my cell phone and need to get my contact #'s off my icloud.  How do i do that?

From a desktop browser.
www.icloud.com
Sign in
Go to Contacts
Click the little gear and click select all, then export.

Similar Messages

  • HT4865 When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone  and i live in Holland, is this possible or only for the future?

    When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone  and i live in Holland, is this possible or only for the future?

    I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow.  I try bridge mode but the internet doesn't work.
    You building supplied internet is a cheap service that is without proper routable addresses..
    Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
    Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
    Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
    You can put a password on the wireless.. go to the airport utility and put in a password.
    Other than that I don't understand what password you expect.
    Can I get an explanation of what bridge mode is?
    No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
    Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
    Double NAT, and set your own wireless names. There is no alternative.. sorry.

  • HT4859 I was in a car collision and need proof of my location when I called 911. How can I get this info. from my i phone device?

    I was in a car collision and need proof of my location when I called 911. The Police Dept., refused to respond, since there were no injuries.
    Now, I have a dispute with the other driver who is falsely stating accident happened at another intersection. In addition of calling 911 twice, I also took pictures of damages. Unfortunately, I did not take pictures of the intersection signs.
    My AT&T carrier states that this info. can only be disclosed by a subpoena. My insurance carrier states that they will not subpoena this info., since it is a civil case only.
    The Police Department does not keep records of calls they do not attend to.
    How can I get this location  info. from my i phone device if at all possible?
    Thanks,
    Pecosa

    Johnathan Burger,
    I did take photos of the damages to car and license plates, but NOT the intersection signs.
    How do I get the GPS Data in the exit data of photos? Please advise.
    Thanks,
    Message was edited by: Pecosa
    Message was edited by: Pecosa

  • HT201317 Why is it when I get a new idevice and try to upload photos from iCloud onto my device there are always a large portion of photos missing?

    Why is it when I get a new idevice and try to upload photos from iCloud onto my device there are always a large portion of photos missing?

    Adding to fromsouth...  if you are restoring from a backup, then only photos in the camera roll are made available, not others.
    If you are using photo stream, then only photos that have been on the stream server in the past 30 days (and a max of 1000 of them) are downloaded.  All others have been deleted, since photo stream is not a storage service, but a syncing service that allows you to sync photos over a 30 day window.

  • I have a new MacAir and don't know how to get info from my USB stick and my SD photo card.  Can anyone help me please?

    I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card.  Can anyone help, please?

    Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
    Matt

  • I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

    I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How do I get contacts from iCloud back on my mac?

    How I got to this place is too long a story, but I ended up with a system iCloud dialogue box on my macbook pro, and the gist of the questions were Do you want to make it so if I quit iCloud my contacts (Notes, Reminders, etc) will no longer remain on your mac? I didn't want to do this, but it seemed it wasn't letting me proceed without hitting the highlighted agree button, so I did.
    I definitely want my contacts back on my Mac. How can I go about getting them from iCloud back onto my mac? I don't intend to quit iCloud, but I have years worth of contacts that I don't want to ever lose.
    Notes would be the next most important one to get back onto my mac. Reminders after that. Thanks much in advance for your help.
    Michael

    Hi Michael Gorsline1,
    I understand that you turned off iCloud on your Mac and subsequently lost all of your contacts, notes, and reminders. If your information, remains on iCloud.com, you can merge that information back onto your Mac by signing back into iCloud and selecting the services you would like to sync. 
    Apple - iCloud - Learn how to set up iCloud on all your devices.
    Best regards,
    Joe

  • I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my Mac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events

    I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my iMac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events, so that if adding an event on my iPone it never appears on my other hardware? Can anyone help me sort this out?

    Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this?  I fear this is a really stupid question!
    My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails.  But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments.  To further complicate things I have other email accounts that I use for business/professional and community work.  If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level?  or both?   
    Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there  a way to name my personal account as one to sync to iCloud?

  • HT4910 I still don't know how to get contacts from iCloud to my macbook !

    For some reason when I sync my iphone to my macbook it is NOT syncing my contacts properly.  My contacts are on iCloud, but how do I get them from iCLoud to my Macbook so that iCloud, iPhone and macbook all have the same contacts.
    Also for some reason there is one group on iCloud with my husband's contacts on it, how do it get that out of my iCloud and into his iCloud?

    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    This user tip might help you understand how accounts work with Address Book. Contacts on the phone is similar.
    Do you and your husband share an iCloud account or are you logged into his iCloud account as a secondary account at mail, contacts & calendars.

  • HT1373 How do I get music from iCloud to my ipad

    How do I get music from iCloud to iPad and iPhone 4s

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How to get data from a USB-UIRT device using Labview?

    How to get data from a USB-UIRT device using Labview?
    I'm trying to get data from a USB-UIRT device, is it posible with Labview?
    I really appreciate your help, 
    thanks

    You may want to contact the developer of the device for the API and DLL.
    http://65.36.202.170/phpBB2/viewforum.php?f=3

  • Bought a new 4s and need to transfer photos from iCloud to new device. iCloud is giving me an old @me address. I do not have the email or pw  for the iCloud account. How do I retrieve this information? Thanks.

    Bought a new 4s and need to transfer photos from iCloud to new device. iCloud is giving me an old @me address. I do not have the email or pw  for the iCloud account. How do I retrieve this information? Thanks.

    If you need to change the iCloud ID on your new phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • SWF-file not getting info from UI

    Hi All,
    I have a dialog that loads a flash-file. This swf-file gets info from my dialog and puts it in a datagrid.
    It works well, untill i try it the script on an other computer. The swf-file loads but is not receiving any information given through the UI.
    Is it a matter of installing extra options/software on the other pc?
    My computer (the script works) is a Windows XP with Adobe Design Premium.
    The other computer is also a Windows XP with indesign and flash player installed.
    Is there anyone who has an idea?
    THANKS
    Greetz,
    Glen

    Ok, i have the answer to my own question.
    I forgot that i had to change the settings in the settings manager of the flash player.

  • How to get info from a layer which is  applied  with styles  ?

    How to get info from a  layer  ?  such  as   (  apply  style  or  not , which  effect  have  applied  on  it  etc..)
    I  really  can't  solve  it , Who can hlep me..  By the way , I 'am  using  CS version.  

    xtools/xlib/Styles.js has a set of functions for working with layer styles. I do not know if it works with CS. I wrote it several years ago for either CS or CS2. If this doesn't work, then nothing will. The script retrieves a layer's style by saving it to disk then parsing the file for the desired ActionDescriptor.
    There is a function at the bottom of the file that tests the Styles.js API.
    Styles.test = function() {  var doc = app.activeDocument;
      var layer0 = doc.artLayers[0];
      var gdesc = Styles.getLayerStyleDescriptor(doc, layer0);
      if (!gdesc) {
        alert("There is no layer style associated with the layer");
        return;
    //   this will set the layer style to another layer.
    //   var layer1 = doc.artLayers[1];
    //   Styles.setLayerStyleDescriptor(doc, layer1, gdesc);
      if (!gdesc.hasKey(cTID('FrFX'))) {  // look for a stroke effect
        return;
      var frfx = gdesc.getObjectValue(cTID('FrFX'));
      if (!frfx.hasKey(cTID('Clr '))) {   // look for the color
        return;
      var clr = frfx.getObjectValue(cTID('Clr '));
      // we should really check that the objectType is RGBC
      var r = clr.getDouble(cTID('Rd  '));
      var g = clr.getDouble(cTID('Grn '));
      var b = clr.getDouble(cTID('Bl  '));
      if (r == 0 && g == 0xFF && b == 0xFF) {
        return;
      clr.putDouble(cTID('Rd  '), 0);
      clr.putDouble(cTID('Grn '), 0xFF);
      clr.putDouble(cTID('Bl  '), 0xFF);
      frfx.putObject(cTID('Clr '), cTID('RGBC'), clr);
      gdesc.putObject(cTID('FrFX'), cTID('FrFX'), frfx);
      Styles.setLayerStyleDescriptor(doc, layer0, gdesc);

  • It is possible to get info from the PDF

    Hi Everyone,
    I'm new baby to acrobat using javascript. It is possible to get info from the PDF.
    The Info contain like Color space, Trim size, which font  used depend on pages and which color is used for image & text.
    Thanks in advance.
    -yajiv

    Hi GKaiseril,
    Thanks for prompt response.
    Actually I'm a new baby to Acrobat script. Please explain briefly How do I write java script and execute.
    I'm familiar with Photoshop and Indesign Script. We are using ExtendedScript Toolkit editor for writing script.
    Thanks in advance.
    -yajiv

Maybe you are looking for

  • Tips/Hints re: using flash for live title graphics and visualisations

    Hi guys, this is my first post. I'm a design student from New Zealand, with a reasonably basic knowledge of flash, I've built a few relatively simple flash sites and applications for example. I got a job the other day to produce live title graphics f

  • Drag and Drop - Transferable, how to pass a reference? (URGENT)

    I've a tree that supports drag and drop correctly but every time I exchange a node position the old parent instance remaining on the tree is different from the one I was referencing with the dragged child before the drag occurred. I absolutely need t

  • BEA-141230 Could Not locate descriptor file for System Resource: DS name

    Guys, When I start the Admin and Managed server ..I get below warning message. *<Warning> <Management> <BEA-141230> <Could Not locate descriptor file for System Resource : datasource1.>* I know that weblogic server is unable to locatie datasource1.xm

  • Export to Vimeo Help

    Hi all, So I just started using the latest version of Final Cut and am having some trouble. Here's my situation: - i am uploading raw footage of an assembly at school (approx. 75 mins of footage) - i chose "share" and then "vimeo" and changed the set

  • Two problems in my iphone

    dear, Apple i have iPhone5s. It has two problem the home button and headest i buoght it frome the factory in USA its inclouding the warrnty how can i contact with you regred ali awad