HT4859 Is there a simple set of instructions and explanations anywhere providing for my Bootcamp on XP iMac and Macbook and Windows XP network setup.I am not a computer genius.

Is there a simple set of instructions and explanations to assist me set up my iMac with XP in Bootcamp, my Macbook, and my windows laptop running XP also.My computer knowledge is less than expert.

Hello, the OfficeJet 6500A E710 is a ethernet only product. The OfficeJet 6500A Plus has wireless support. Since the printer's front panel network settings do not have the wireless options, I suspect you do not have the Plus model and that is why you cannot setup wireless. Do you have the 6500A Plus or 6500A?
Although I am an HP employee, I am speaking for myself and not for HP.

Similar Messages

I want to set up a separate cloud/itunes account for my husband. Right now we share and it is causing confusion.

I want to set up a separate cloud/itunes account for my husband. Right now we share and it is causing confusion.We both have the iPhone4

The way I set up my 3 iPhones is to create separate "iCloud" ID's for each user, but then use the SAME iTunes Apple ID for the iTunes store. You'll most likely lose your contacts, Calendars etc. unless you have them saved on a computer. You'll need to delete your current Account under iCloud, then create a new "iCloud" Apple ID ([email protected]) for at least one device if not both (one for yourself and one for your husband). Once you have those set up for your iCloud, then Goto Settings, Store, then change that ID to your old "iTunes" Apple ID, that way you can still both use your previously purchased Music/Apps etc.
You can then change your computers to use the new iCloud ID's and it should upload the data back to the cloud. Just be warned that it might wipe out any saved Contacts/Calendars etc. if you don't have them on a computer as well.
There is a Help article on how to do this as well, but i can't seem to find the link.

TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Are there some simple start up instructions for a first time user of Lion Server?

Our small office has been using MobileMe to share one central calendar on a mac mini with 4 users MBPro users. We were also using a 3rd party application (Address Book Server (ABS)) to share a central Address Book contact database with the same 4 users. It was all working fine. Then we upgraded all our systems to Lion and iCloud. Calendar sharing works fine, but it broke our contact sharing. ABS used the old sync capability. Now all our contacts are on iCloud, and they won't sync anymore.
Does anyone know if there is a way to share contacts among several users in iCloud? (I haven't found one.)
We are now considering Lion Server, but all we need it for is sharing contacts (shared calendars under iCloud works fine).
Can we install Lion Server for just contacts and continue to use iCloud for calendar sharing?
Is there some simple Start up documentation available for Lion Server that I can read before I jump into it?
How much time is it really going to take to install and manage a server system?
We are not IT professionals. Just a small office of professionals, who want the conveninece of shared calendars and shared contacts. We all have our own calendars and contacts as well, and we want to be able to see them on all our devices: MBPros, iPhones, iPads etc.
Thanks so much for your help.

You can use Lion Server in place of the MobileMe/iCloud account. That would be your best bet. Lion Server has built into it an address book server and a calendar server which would take the place of what you are currently using.
Lion Server is designed to be quite easy to setup and run. It is pitched as being meant for people who "don't have an IT Department." Honestly, most of it is just on/off switches. If you have a Mac Mini and all of your users are on their MacBook Pros, you pretty much have the hardware necessary. Assuming all of your machines can run Lion, you should be good to go.
The most technical you might have to get is to get a domain name from some place like godaddy.com. The Server App actually walks ou through the whole setup process step-by-step. Not to mention that there is a vibrant community of users to be help out. And once it is up and running, there is very little you should have to do to it.
There are a lot of technical components to any server platform, and Apple is no exception, however they do a good job at hiding it. And at $49, you do not have much to lose. Plus, you only really need to use the components you want. If all you want in address book server and ical server, then just use those. You find you want to start sharing documents, turn on file sharing. It is up to you. Don't feel pressured to have to use every component.
Apple has posted they "Advanced Administration Guide" which has a lot of good information in it, and it is searchable. Check it out: https://help.apple.com/advancedserveradmin/mac/10.7/

Just set up our Apple TV and it works fine for NetFlix. However want to stream photos and I Tune library from home computer but this computer accesses the internet thru a VPR at my wife's place of enployment. Other than a 2nd computer any suggestions?R

Just set up Apple TV on home network. Works fine for NetFlix but we can't stream I Tune libruary or digital photos thru it to our home TV as because of my wife's work we bypass COX and access the internet thru a VPN offered by her employer. Was told we either have to buy a second computer (two expensive for just these two functions) or keep turning on and off the VPN(not practical). Any other ideas? Thanks

Does she need to access the internet through her employer, or is she just trying to access her internal network at work?
If it's the latter, split-stream VPN clients (like Cisco AnyConnect) will split traffic so that only that directed at a particlar domain gets tunneled.
I have an AnyConnect client at home, but I normally only activate it when I'm using it, so I've never tested it with HomeSharing. I'm currently traveling, but when I get home tomorrow, I'll try it out and let you know if it works. If it does, your wife can check with her employer to see if she can configure AnyConnect to work with them.

Is there a simple way to create a custom item list for a List Picker field?

I have created a List picker field and added it to my customized version of the Incident Management form. I need to populate this List Picker with custom items (Departments) and everything I am reading about how to do that is that I have to write a
bunch on XML code. Is there a relatively simple way to populate a List Picker field with custom entries that does not require me to know scripting or XML?
Thanks in advance for any help
Mark

Assuming that you have created a Enumeration picker (i.e.
you used the authoring tool and dragged what it calls a list picker in, and then selected a list that you created in the authoring tool), then you can edit the contents of those Enum Lists using
the Lists view in the Library pane, or by editing the XML as in the last reference.
You might also be interested in the
Bulk Enum creation tool, which automates the process of creating that XML

I want to display all errors in a listbox. Is there a simple way to do this, such as a vi that takes as input: error_in, error_out, listbox and then appends the error text to the listbox if the error_out is different than error_in?

would like to display time of occurrence and error text, so possibly a table instead of a listbox

You can check on the alliance page for a product that does this, but there are no LabVIEW utilities to do this specific task. You will have to build one yourself it seems.

Setting filterFunction on ArrayCollection acting as provider for DDL--and change handler not firing?

Hi All,
I've got a Spark DropDownList (I'm on Flex SDK 4.0, Flash Builder 4).
That DropDownList has an ArrayCollection as its dataProvider property, and in response to user gestures, I change the filterFunction on the ArrayCollection (and call ArrayCollection.refresh()) to update the list of items in the DropDownList. This works fine.
However, what I wasn't expecting was that neither my change event handler, nor my valueCommit event handler gets called when the selected item in the DropDownList changes due to the filterFunction filtering out items from the ArrayCollection.
In other words, let's say I have items A, B, and C in ArrayCollection (and thus, also as items in my DropDownList). Item A is currently selected, but I then set the ArrayCollection.filterFunction to something, and call ArrayCollection.refresh(). Items A and B are filtered out by the filterFunction, and it disappears from the DropDownList, causing item C (the next available item after A and B) to be selected. But, even though the selected item has changed, neither my change handler nor my valueCommit handler get called.
I know the handlers are working, because the change handler gets called when the user selects a new item from the DropDownList, and the valueCommit handler gets called when the selectedIndex is changed programmatically in code, as expected.
Is this a known issue? Is there an event I can listen to so I can know when the selected item has changed in this circumstance?
-Josh

I'm not on a beta. I'll try post a short test case as soon as I am able, but I'm in the final week before a major project deadline and as a result I've got to stay pretty focused on that :-)

Hi i am havin trouble with my ipad after i have downloaded a game and have been playing for a while it seems to of diapeared and the screen goes a white blank background there is nothing on the screen at all so i switch it off and back on and it is white

hi i am having trouble with games on my ipad as i have been playing them the screen goes white and i can't play the game i go back to the game centre on the ipad and click on the icon for the game and come up to play i push play buton and the screen come up again white so any body had the same problem could they let me no thanks

Quit the game and restart the iPad.
To quit the game - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is there some simple setting out there that will just "make it so?"@

The video I am watching this guy is just dragging every line to make curves. And every anchor point is a corner. He is not switching back and forth between the pen and the anchor points tool, and he is not using the convert points tool. He draws a curved line and starts another straight line only to curve it with a click and a drag. It is super efficient, and I could save a world of time if I could figure out what he is doing.

Set default account option is grayed out for my main account

My original main email account used to be the top of the drop-down list (thus default) for creating new mail. Since I added a few gmail accounts, one of them appears first under Inbox and is now the top of the drop-down list. I can't figure out how to get my old primary account back as the default. In the account settings, it says that my desired default account is " a special account and has no identities associated with it". In the Tools-Account Settings menu, the "set as default" option is grayed out for this account. What does "special" mean and how can I return this account to being my default "from"?

In which case you are using what is normally called Local Folders which is a special private pseudo-account for offline storage.
Somewhere there will be an actual email account, though if it is using POP and has been set to use the Global Inbox, it may be hard to see.
Set '''View|Folders|All''' and see it if can be found. If not, you'll need to go to '''Tools|Account Settings''' and look at its properties there.
I guess at some point you have changed "Local Folders" to something else, which is going to make giving you advice difficult, and will make following any advice more difficult for you.

Is there a simple way to retrieve the data from a resultset using JavaBean?

I have a result set from a select * from users where userid = xxx statement. However, at the moment I have had to hard code the remainder of the code to get the data from each column as I need the column name as well as its data.
I had read somewhere using java beans and reflection it is easier. But i do not know know how.
Is there a simple way to retrieve the data from a result set ?
thanks in advance-
kg

Well, it is not really simple. But there are Open Source components to simplify it for you. See e.g http://www.must.de/Jacompe.htm - de.must.dataobj.DataObject and its subclasses. Feel free to contact me if you have any questions: [email protected]

Is there any "simple" documentation on the steps to download and install Photoshop and Premiere Elements V13? The downloads seems to work but there's nothing clear on what do you do next.

I've been messing with computers since 1958 and I've never seen such a mess as trying to download and install the recently purchased copies of Photoshop and Premiere Elements Version 13. Slow downloads? Sure, but I can live with that. But once downloaded, what next? Look for a xxx.exe file somewhere in the pile? Read the "ReadMe" file? All I seem to get is unzipping some files with nothing leading me into the proper steps. I can't even seem to get off the ground. Everything I touch unzips and just lies there. I hate to think I've gone dumb after all of these years, but "user friendly" this is not. My "Your order confirmation" sheet gives me "Follow the instructions below to start using it today" and the first three steps work as you'd expect. Step 4 states "After you have completed the download process, your serial number will be displayed in the download center." Step 5 is "You can log back into 'Adobe Account Management' in the future to re-download your product or retrieve your serial number. ...." I have no problem with my serial number but there seems to be a lot missing between Steps 4 and 5. It would be nice to have this information as pretty standard "stuff. Computers are supposed to do super stuff without a lot of time-consuming problems with a simple process like installing the software. I'm feeling a bit hostile about this but it is a time-consuming, frustrating process.

Justin created a guide to using Favorites. It will help you a lot with what you seek. He has a link to it in this thread.
http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/Exploiting-FiOS-TV-Favorites/m-p/9935

Is there some time setting in sql*plus or Oracle9i

Hi guys,
I just run the following simple query in sql*plus in oracle 9i:
select * from pers ;
The table is around 190k rows. But it always stops running after 28-30minutes. No error message displayed and the whole sql*plus just hang on there.... The only thing I can do is to restart the sql*plus.
I got this problem when I run some other query, so I use this simple query just to test if it will stop after running 30m. Now it does. I'm thinking there is some setting in sql*plus or ORACL9i I need to do. Could someone help me to solve this problem?
Thanks in advance,

Hi,
you can check out this information in the user_resource_limits table.
select * from user_resource_limits;
COMPOSITE_LIMIT UNLIMITED
SESSIONS_PER_USER UNLIMITED
CPU_PER_SESSION UNLIMITED
CPU_PER_CALL UNLIMITED
LOGICAL_READS_PER_SESSION UNLIMITED
LOGICAL_READS_PER_CALL UNLIMITED
IDLE_TIME UNLIMITED
CONNECT_TIME UNLIMITED
PRIVATE_SGA UNLIMITED
Thanks.

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

HT4859 Is there a simple set of instructions and explanations anywhere providing for my Bootcamp on XP iMac and Macbook and Windows XP network setup.I am not a computer genius.

Similar Messages

Maybe you are looking for