HT4859 my iphone fails to backup to icloud. eack time i try manually it fails after estimating the time.

I have not been able to back up my iphone to icloud. Each time it fails. Do I need to reset the phone and try?
Jonathan

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

Similar Messages

Iphone will not backup to icloud, iphone will not backup to icloud

iphone will not backup to icloud. times out. other iphones and ipads in my house back up fine. using the latest ios.

Try tapping Settings > iCloud > Storage and Backup > Manage Storage, and delete the backups, also note the space available on iCloud.
Then try to Back Up Now from Settings > iCloud > Storage and Backup.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

TS3992 iphone 4S not backuping to icloud since upgrade to iOS6

My iphone 4S is failing each time to backup to iCloud. This happens since upgraded to iOS6.

If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync. But then the new info on my iPhone does not backup to iCloud. Is there a solution?

I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?

I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

Documents created on my iPhone or iPad go into iCloud with no problem. Why can't I get the documents created on my MacBook Pro to go into iCloud?

Documents created on my iPhone or iPad go into iCloud with no problem and I can then access those documents from any of my "toys". However, documents created on my MacBook Pro do not go into iCloud, and as such, they are not accessable from my iPhone or iPad. How can I get the documents created on my MacBook Pro to go into the cloud?

Reset iCloud sync state
On Mac:
Close open applications
Open a Finder window
Choose “Go to Folder…” from the “Go” menu
Enter “~/Library/Application Support/”
Find the folder named “Ubiquity” and move it to the Trash
Restart your computer

Wifi connection to iphone fails after replacing sim card

the sim card on my iphone failed and had to be replaced. the phone works fine now EXCEPT cannot get wifi from verizon Actiontec router: says Incorrect Password. other devices (iPad, Kindle) still connect OK. please help.
Lou

Not sure if the sim card is envolved with the WIFI connections, But maybe it is.
Try deleting the connection and redefining it.

Database initialization failed after attach the database.

Hello Everyone,
I have a problem after detaching the database and attaching it again (I moved the database to another partition because of shortage of disk space). Then, I find that the system can not start. (I've two systems and now neither of them could start). The error seems very similar.
In the pure java system(netweaver 04s) log: jvm_bootstrap.out,
com.sap.engine.bootstrap.synchronizationException: Database Initializtion Failed! Check database properties.
com.sap.engine.frame.core.configuration.configurationException: Error while connecting to DB.
Caused by: java.sql.SQLException: [NWMss] [SQLServer JDBC Driver] [SQLServer] Login failed for user 'SAPBP0DB'.
In pure ABAP system(Netweaver 04s) log: dev_w12:
openoledbConnection: MARS property was not set.
openoledbConnection: line 23722. hr: 0x8000ffff login failed for user 'CNDT50083414\SAPServiceBE0'.
sloledb.cpp [openoledbConnection, line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
sloledb.cpp [openoledbConnection, line 23722]: Error/Message: (err 0, sev 0), Invalid string connection attribute.
Is this because the DB not started? In Windows Services, I found 'MSSQLServer' is started.
How can I trace down to this problem? I don't have much idea on DB...
All your kindly help is greatly appreciated.
Best Regards,

Hi Karan,
Thank you for your reply. I attach the dev_w0 file here:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Tue Sep 23 13:16:15 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\BE0\DVEBMGS02\exe\dbmssslib.dll' ...
B Library 'C:\usr\sap\BE0\DVEBMGS02\exe\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\BE0\DVEBMGS02\exe\dbmssslib.dll' is "700.08", patchlevel (0.158)
B New connection 0 created
M sysno      02
M sid        BE0
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    159
M intno      20050900
M make:      multithreaded, Unicode, 64 bit, optimized
M pid        1704
M
M kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1704) [dpxxdisp.c   1316]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          21008     (1616)
M DpShMCreate: sizeof(tm_adm)          5912624     (29416)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm)          552080     (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1864)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000011080050, size: 6604928)
M DpShMCreate: allocated sys_adm at 0000000011080050
M DpShMCreate: allocated wp_adm at 0000000011082150
M DpShMCreate: allocated tm_adm_list at 0000000011087360
M DpShMCreate: allocated tm_adm at 00000000110873C0
M DpShMCreate: allocated wp_ca_adm at 000000001162ABF0
M DpShMCreate: allocated appc_ca_adm at 00000000116309B0
M DpShMCreate: allocated comm_adm at 00000000116328F0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000116B9580
M DpShMCreate: allocated gw_adm at 00000000116B9600
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 00000000116B9630
M DpShMCreate: allocated wall_adm at 00000000116B9640
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host CNDT50083414
M
M Tue Sep 23 13:16:16 2008
M calling db_connect ...
C Thread ID:6104
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\BE0\DVEBMGS02\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      158
C    patchcomment Corrections of odbc-based dbsl: dsql: optype, DSN (1135165)
C np:(local) connection used on CNDT50083414
C CopyLocalParameters: dbuser is 'be0'
C
C Tue Sep 23 13:16:17 2008
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: line 23722. hr: 0x8000ffff Login failed for user 'CNDT50083414\SAPServiceBE0'.
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 18456, sev 0), Login failed for user 'CNDT50083414\SAPServiceBE0'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23722]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> Login failed for user 'CNDT50083414\SAPServiceBE0'. [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error -1     performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> Login failed for user 'CNDT50083414\SAPServiceBE0'. [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10504]
M
M Info for wp 0
M
M    pid = 1704
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server CNDT50083414_BE0_02 on host CNDT50083414 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Tue Sep 23 13:16:17 2008
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10724
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1704) [dpnttool.c   333]

SSPR registration and reset started to fail after renewing the certificates

Hi,
On our FIM 2010 R2 environment (version 4.1.3599.0), after renewing the certificates used on FIM Service/Portal and Password Reset/Registration servers two days back, both the password registration and reset no longer work but instead fails on the last
step of the process. So for example when user browse to https://passwordreset.domain.com and fills in their domain\username and click next, FIM will send a security code (SMS OTP) to user´s mobile phone and once user then fills in code and click Next, the
Communication error 3008 is shown to user. Same happens in the last step of the registration where user reviews that the mobile number is correct before clicking finally next. Once clicked the same error as is with Reset portal is shown to user.
Other changes than renewing the certificates have not been done to the environment after it was working last time two days ago. Synchronization of users/groups create in FIM Portal works normally towards AD.
All servers within FIM environment are on same domain and subnet and firewall is off on all servers.
The following error message as an example is recorded on FIM app log on either of the SSPR servers (two in NLB):
The error page was displayed to the user.
Details:
Title: Communication Error
Message: An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3008)
Source:
Attributes:
Details: Microsoft.IdentityManagement.CredentialManagement.Portal.Exceptions.GenericCommunicationException: An error occurred while receiving the HTTP response to http://fimservice.domain.com:5726/ResourceManagementService/SecurityTokenService/Registration.
This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See server logs for more details. ---> System.ServiceModel.CommunicationException:
An error occurred while receiving the HTTP response to http://fimservice.domain.com:5726/ResourceManagementService/SecurityTokenService/Registration. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an
HTTP request context being aborted by the server (possibly due to the service shutting down). See server logs for more details. ---> System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a receive. ---> System.IO.IOException:
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
The following error message as an example is recorded on FIM app log on either of the FIM Service/Portal servers (two in NLB):
Microsoft.ResourceManagement.Service: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ResourceManagement.WebServices.SecurityTokenService.TokenIssuer.IssueSecurityToken(Message requestMessage, Object request, Claim[] claims)
at Microsoft.ResourceManagement.WebServices.SecurityTokenService.Challenger.IssueAuthenticationChallenge(Message requestMessage, Object requestBody, Nullable`1 requestContext, UniqueIdentifier authenticationProcessIdentifier, List`1 accumulatedClaims,
Nullable`1& currentWorkflowInstanceIdentifier, AuthenticationChallengeType[]& currentChallenges)
at Microsoft.ResourceManagement.WebServices.SecurityTokenService.ProcessRequest(Message requestMessage, Object requestBody)
at Microsoft.ResourceManagement.WebServices.SecurityTokenService.RequestSecurityTokenResponse(Message requestMessage)
Both http://fimservice.domain.com:5726 or http://fimservice.domain.com:5725 can be accessed ok using web browser from the SSPR servers. The url of http://fimservice.domain.com:5726/ResourceManagementService/SecurityTokenService/Registration gives http 400 bad
request which is ok.
At least the following fixes provided on urls below have been tried out or were in place already but did not fix the issue:
http://social.technet.microsoft.com/wiki/contents/articles/24629.fim-troubleshooting-sspr-registration-error-3008-an-error-occurred-while-receiving-the-http-response.aspx
https://social.technet.microsoft.com/Forums/en-US/ae16496e-413a-45b7-a0d1-b39652c6478a/fim-password-registration-portal-error-3008-communication-error?forum=ilm2 (we have exactly the same three errors on FIM app log as mentioned in this post)
https://social.technet.microsoft.com/Forums/en-US/aa14cff7-6b93-4413-8c75-737dd08bd25f/error-when-resetting-password-on-sspr?forum=ilm2
https://social.technet.microsoft.com/Forums/en-US/aab6d5ef-667a-4ea9-876d-415c56852da9/sspr-password-reset-failure?forum=ilm2 (no such lines on FIMService config files)
Can anyone help us with this and provide some tips what to check next on the environment? As the most weird thing here is that everything was working just fine before the certificates were renewed on all servers and no other changes were done on the environment.
-Pappa75

Hi,
Have you Stop-Start the FIM Service? If not then try this after performing this step. Also, there may be a possibility that the service won't be able to start if there is issue with the certificate.
The SSPR issue is related to certificate only, which might have some missmatch in the thumbprint value or some other problem.
If there is a problem with thumbprint of certificate, then you might see error in the Event Viewer and which can be resolved by making the certificate's thumbprint same within registry.
Regards,
Manuj Khurana

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

HT201210 my iphone 3gs is on recovery mode but when i try to restore it, it says the server cannot be reached or temporary unavailable.please i need help.

can you help me my phone doesnt want to restore from recovery. it keep on saying the server is unavailale

Usually a sign of a jailbroken iPhone & since Apple does not support jailbreaking, that's what happens. If that's the case with you, we can't help you here...the terms of use prohibit such. Sorry, but you'll have to go elsewhere.

HT1414 my iphone 3gs is on recovery mode but when i try to restore it, it says the server cannot be reached or temporary unavailable.please i need help.

can you help me my phone doesnt want to restore from recovery. it keep on saying the server is unavailale

Usually a sign of a jailbroken iPhone & since Apple does not support jailbreaking, that's what happens. If that's the case with you, we can't help you here...the terms of use prohibit such. Sorry, but you'll have to go elsewhere.

Startup on AS/400 fails after following the Installation Instructions

I am not at all familiar with AS/400. Can anybody tell me what the
problem is? Following the instruction in the message does not help
either...
Startup on AS/400 fails after the WEBLOGIC/STRWEBL command is executed
with the following message:
The WebLogic Server did not start up properly.
Reason:
Cannot start server because weblogic.class.path is enabled and the
Weblogic classes are not in the weblogic.class.path. Please alter
the weblogic.class.path to include the Weblogic classes or set
weblogic.system.disableWeblogicClassPath=true to allow classes to
be loaded from the java CLASSPATH.
NOTE: Doing so will disable EJB hot deploy and should only be
done on platforms as specified in the documentation.
Java program completed with exit code 1
Mark van Holsteijn

Mark van Holsteijn <[email protected]> wrote:
I am not at all familiar with AS/400. Can anybody tell me what the
problem is? Following the instruction in the message does not help
either...
Startup on AS/400 fails after the WEBLOGIC/STRWEBL command is executed
with the following message:
The WebLogic Server did not start up properly.
Reason:
Cannot start server because weblogic.class.path is enabled and the
Weblogic classes are not in the weblogic.class.path. Please alter
the weblogic.class.path to include the Weblogic classes or set
weblogic.system.disableWeblogicClassPath=true to allow classes to
be loaded from the java CLASSPATH.
NOTE: Doing so will disable EJB hot deploy and should only be
done on platforms as specified in the documentation.
Java program completed with exit code 1
Mark van Holsteijn
I got the same problem with you. If you had handled with it, please tell me. Thanks!

New iPhone, no computer backup but iCloud

I just got a new iphone and didn't have a computer back up, it was synced to icloud. Now I can't get my data off iCloud because it is a synced device. What do I do to get my stuff back?

Back up your old phone to iCloud, then restore your new phone from the backup:
http://support.apple.com/kb/HT4859

HT4859 how do i find backup of icloud on computer?

my iphone doesnt work anymore and is unfixable. i want to find the icloud backup on internet to what was backed up. how do i do that?

Welcome to the Apple Community.
You can't do that. The back up is only accessible to restore your replacement phone when it arrives. You can't access the back up in other ways.

HT4859 my iphone fails to backup to icloud. eack time i try manually it fails after estimating the time.

Similar Messages

Maybe you are looking for