HT4859 restoring backed up data - after set up assistant

What if i have skipped the "restore from icloud backup" during the set up assistant - is there any way to get it once the ipad is up and running?

Thank you randers4 and Eric Ross. The only problem is that i did this because of the following error:
"To: Clash of Clans. "When I first started on my iPad I didn't log in to game centre (but I thought I had). Then I downloaded it on my iPhone and followed the steps to register, and thus created two games...the one on my iPad which was far advanced and the one on my phone which I had played once but was registered. Now, whenever I play on my iPad it asks to sync with game centre (which I want to do so I don't lose my game but it will be overwritten with the phone game, which I dont want."
And i followed their advice which was:
"If you wish to start another game, you need to reset your device - please use this with caution as you will lose all data from the device.
In order to reset your device safely, please follow the steps below:
1) Go to settings
2) Go to iCloud
3) Go to Storage & BackUp
4) Go to "BackUp now"
5) Go back to settings and go to "general"
6) Go to "reset"
7) Go to "erase all content & settings"
After the reset is done and your device starts up again, it is very important that you do not load your back-up immediately.
8) Skip the Backup (click on "later")
9) Go to the App Store
10) Download Clash of Clans
11) Log in through Game Center and start a new game
12) Go back to settings / iCloud and load the back-up to get all your files back"
As you can see, i was not supposed to restore back up during the set up process. i just hoped there was another way - or maybe i'm misreading the instructions.

Similar Messages

Restoring backed up data after Win7 recovery

did a total recovery from the HP Support Assistant - first backed up files to external hd thru same restarted computer as instructed, am ready to put back all my stuff from the external HD - HOW DO I DO THAT PROPERLY? I look at the external and I'm not sure how to do it. HELP please? I dont want to flub this up as I've done before and made things worse!!! thanks so much for your help asap!

Thank you randers4 and Eric Ross. The only problem is that i did this because of the following error:
"To: Clash of Clans. "When I first started on my iPad I didn't log in to game centre (but I thought I had). Then I downloaded it on my iPhone and followed the steps to register, and thus created two games...the one on my iPad which was far advanced and the one on my phone which I had played once but was registered. Now, whenever I play on my iPad it asks to sync with game centre (which I want to do so I don't lose my game but it will be overwritten with the phone game, which I dont want."
And i followed their advice which was:
"If you wish to start another game, you need to reset your device - please use this with caution as you will lose all data from the device.
In order to reset your device safely, please follow the steps below:
1) Go to settings
2) Go to iCloud
3) Go to Storage & BackUp
4) Go to "BackUp now"
5) Go back to settings and go to "general"
6) Go to "reset"
7) Go to "erase all content & settings"
After the reset is done and your device starts up again, it is very important that you do not load your back-up immediately.
8) Skip the Backup (click on "later")
9) Go to the App Store
10) Download Clash of Clans
11) Log in through Game Center and start a new game
12) Go back to settings / iCloud and load the back-up to get all your files back"
As you can see, i was not supposed to restore back up during the set up process. i just hoped there was another way - or maybe i'm misreading the instructions.

How can i get back my data after i restored my iphone and accidentally created a new iphone ac.

how can i get back my data after i restored my iphone and accidentally created a new iphone ac.
it did a back up when i started my restored iphone and i cant retrieve my previous backup while i didnt back up on icloud....
the new ac is actually the same apple id as the one i used. I lost all my contact, photos and data of whatsapp...
what can i do...help!

I don't know if this is a similar problem but I wrote 2 notes yesterday on my iphone. I opened my mail to print them and they appeared as notes but wouldn't load. Then I looked at them on my iphone and I could see the notes but they quickly updated to blank with a time of the last edit the same time I tried opening them on my computer.
Yesterday I updated to 4.3.4 I don't know if somehow that affected them. Are they stored somewhere else. Can I get them back?

Restore Safari Keychain data after Remove All

Restore Safari Keychain data after Remove All
I mistakenly removed all Safari Keychain data, which, of course, also removed the data from my iOS devices. I attempted a restore with a "Keychain" folder. It's on my desktop, but I'm not sure what to do with it or if it's even the right data. Can anyone help with how to restore keychain with Mozy? Thanks!!

From your Safari menu bar click Safari > Preferences then select the AutoFill tab.
Select: User names and passwords
Visit a website. Enter the login data. You will be prompted tos save that data to a new keychain.
Restore... as I mentioned previously, Mozy is not compatible with Keychain Access. There is no way to restore with Mozy.
In the future, you may want to use iCloud Keycahin to store login data.
Apple - iCloud - Learn how to set up iCloud on all your devices.

How to restore my iPhone data after mixed with my husband iTunes

how to restore my iPhone data after mixed with my husband iTunes

You might what to say what data you have mixed and where.

HT1766 How can i restore all my data after deleting the apps? can i syncing back from the macbook?

How can i restore back all my data after deleting the apps and re-install back.
After reinstall back stll retrieve all my data.
Can i syncing back the original frm my macbook since last update is Mar

Favor the route via iTunes and local storage on the computer. MUCH faster than any cloudy backup, no matter the speed of your Internet connection. No network beats the speed of a hard drive. Just make sure there's enough room on the computer before you start, must contain all that's on the iGadget.

Can un-backed up data after restore be found?

Hi,
Ive recently tried updating my iphone and i had trouble with my apple device service not working and fixed that - I had to re-install itunes and restore my iphone, in the process I lost 3 months of data/information/photos off my iphone.
Is there anyway to get this un-backed up data retrieved??
Any information would be gratefully appreciated,
Mandy

If it is not backed up, then it is gone.
Sorry.

Not able restore iphone 4 data after upgrading it to ios 7.1.2

I have upgraded my iphone 4 ios to 7.1.2. I took a back up of iphone data on my computer(win XP) using ITunes. However, now I am not able to restore my iphone data from ITunes. It is giving me error like "error occurred while restoring this iphone (-50)...." something like that
I am stuck on my Iphone and it is showing me only set up iPhone screen. If I select restore from ITunes backup option, it is showing connect to iTunes screen. After connecting iphone to iTunes, it shows error msg like "iTunes was interrupted while restoring the contents of the iphone......" and if I say continue restore I get error message "error occurred while restoring this iphone (-50).... Even I tried restoring iphone to factory setting then restoring backup from iTunes but no luck.
Can anyone guide me on how to resolve this issue. Appreciate immediate help on this.
Thanks in advance,
Vishalad

after upgrading I have been getting the slide to setup screen and I could see 3 options, so I selected 3rd option to restore from iTunes backup. Then I go this error "error occurred while restoring this iphone (-50)....".
Now after several try and restoring iphone to factory setting I am able to restore data successfully iphone. However, I still see the slide to setup iphone screen. I am not sure what is the issue. I am stuck and not able use my phone. not sure how to get rid of this screen and set up iphone screens.

Help, how to restore backed-up data from old 3GS to my new 3GS?

Hi I recently got a replacement phone, and when i synced it to iTunes, the prompt to restore my backed-up data came up. However when I tried to restore, it prompted me to update my new phone's software to 3.1 first.
So now, after updating my software, how do I restore the data from my old phone?
Coz the first prompt does not appear anymore.
Would appreciate your feedback, thanks!

Upgrade to 3.1 first, do not sync or backup. After you upgrade, reconnect & select restore from previous backup & all your data will be put back on the new phone.
When you right click on your phone under devices in the right column, one of your choices will be restore from backup.
Message was edited by: wjosten

Restoring Back To 10g After A Failed 11g Upgrade Of a RAC Database

I'm testing this out on a small test RAC database. I successfully upgraded it from 10.2.0.4 to 11.2.0.2 but wanted to test the scenario of having to go back to 10g if the upgrade really hosed up. The first recovery attempt seemed to be successful but after bringing the DB down with srvctl, it failed on the next startup saying it needed to be started in upgrade mode. Something from 11g was still in place or the fact that I was trying to restart a 10g database managed by 11g clusterware was the issue. I tried starting the DB from both 10g and 11g environments and got the same result. Even starting each instance individually got the same result.
In all that I tried, I got the usual incarnation and "until time before reset time" messages. I've been doing this all through RMAN without EM or Grid Ctl. As usual, any docs I found have had just a little information and I have to piece my own instructions together from all of them, not knowing for sure it all steps would apply in my situation.
Can anybody point me to a good doc or other resource that might help me out? Many thanks!

Now I have a different issue with apparently the same problem. I successfully did the restore/recover as before but the thing pukes when I open resetlogs at the end. Something, somewhere is still pointing to 11g but I have no idea where or what has changed since the last time I did this. Maybe I've messed things up by doing this multiple times. Here are my RMAN commands:
RMAN> connect target
RMAN> startup force nomount;
RMAN> RESTORE SPFILE TO '+DATA/jimg/spfilejimg.ora' from '/local/oracle/10.2.0/db_1/dbs/c-2526333028-20110915-01';
RMAN> shutdown immediate;
(in a different session, from command line)
% mv /local/oracle/10.2.0/db_1/dbs/initJIMG1.ora.bak /local/oracle/10.2.0/db_1/dbs/initJIMG1.ora
RMAN> startup force nomount pfile='/local/oracle/10.2.0/db_1/dbs/initJIMG1.ora';
RMAN> restore controlfile from '/local/oracle/10.2.0/db_1/dbs/c-2526333028-20110915-01';
RMAN> alter database mount;
RMAN>
run {
restore database;
recover database;
RMAN> alter database open resetlogs;
The errors I get after resetlogs are:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/16/2011 09:24:50
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-03114: not connected to ORACLE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/16/2011 09:24:50
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
This is being done on a small, expendable database for practice. I think I've learned enough about what NOT to do to keep me from getting in this jam to begin with. Any thoughts?

HT5262 Is there any way to 'Restore' back to iOS5 after mistakenly upgrading to 6?

Is there any way to "Restore" back to iOS 5 after mistakenly upgrading to 6?

Well, so much for using the "Maps" app on my overseas vacation starting next week. I wonder how soon they will fix that?

How to restore backed up data of another iPhone?

Please help me out. I connected my friend's iPhone to my iTunes and it offered to update the software on it. I decided to update as my friend had never than that before. And, now I am in trouble, cause all his data is gone. I mean all... before it was synchronizing it said that it was backing up the data ... does anyone know how to find this data? Because my iTunes has only the data for my iPhone ...
Thank you

Go to iTunes preferences. Is there a backup listed under the Devices tab for your friend's iPhone?
If so, your friend needs to restore his iPhone with iTunes from the backup for his iPhone.
When restoring, his iPhone will be erased and the firmware will be re-installed. After the firmware is re-installed, you will be prompted to restore the iPhone from an available backup - which is the default selection. If the backup for his iPhone is not selected, you can select it from the pop-up.
The backup includes data such as most iPhone settings, email account settings, contact info, SMS messages, notes, recent calls, call favorites, photos that were in the iPhone's camera roll, and 3rd party app settings and data created and stored by a 3rd party app.
In regards to iTunes content, an iPhone can be synced with an iTunes library on a single computer only, and photos can be transferred to an iPhone from a single computer only.
If the backup for his iPhone is available and restored, do not sync his iPhone. He will need to sync his iPhone with the iTunes library on his computer to re-transfer his selected iTunes content including 3rd party apps.

I cannot restore back my data back to my Q5 ! PELASE HELP!!!!!!!!!!!!!!!

im in the middle of a huge problem where i have become desperate and lost, here is how it all began, first of all i received an alert that a new update is available for my Q5 which is 10.2.1537 when i started to downloanding it i received an error that built in memory is full WHICH IS NOT! secondly i thought in order to get the latest update i had resolve this memory error by WIPING OFF the mobile so i did a FULL DATA BACK UP while it was running OS 10.2.0.424 , and then DID the full WIPE, but it took around 6 HOURS!!!! after the wiping process i tried to download the new update 10.2.1537 and it was successful, i connected my q5 to my laptop and opened blackberry link (latest version) selected the BACK UP FILE which i made before the wipe , BUT IT WAS UNSUCCESSFULL ( the alert message was this : this dats file isn't compatible with the version of the device software that you are currently running, update your device software and try again) WHICH i did downgrade to the previous version OS 10.2.0.424 and tried to restore the data file, but it WOULDNT WORK! please HELP im in desperate need for your help ive got my whole life on this mobile and right now im isolated!
the following day what happened is, i did try what was mentioned in the link BlackBerry 10. Restoring Backup after a firmware downgrade. i did exactly the same but it FAILED, and i got this error (there could have been a problem with the device or connection during the restore. Verify that the device is turned on and connected) and then device restarts afterwards, hence, i started to get this error message after i updated to latest OS 10.2.1.539 but when i tried to restore the back up when i was running the previous OS 10.2.0.424 the error message was ( the back up isn't compatible etc... ) this is really confusing, my device is working just fine and its properly connected with no problems, ive been searching and looking for solutions all over the internet but no luck , im really exhausted ive been working on my q5 for almost 26 hours, im just praying to get this fixed.

Same Here..after upgrade won't restore, I did backup with blackberry link and it was a successfull backup..I brought it to the service centre and ask the to restore it for me with no success as well..they even downgrade my phone to 10.1...no success..please find the bug on your OS or BlackBerry LINK to fix this..my data is very important to me..BTW BlackBerry protect also doesn't do a proper backup..only my previous BlackBerry (OS 7) backup is available for restore..this is the second time I lose data to BlackBerry (before was in my Dakota)...

I cannot restore back my data to my Q5 ! PELASE HELP

im in the middle of a huge problem where i have become desperate and lost, here is how it all began, first of all i received an alert that a new update is available for my Q5 which is 10.2.1537 when i started to downloanding it i received an error that built in memory is full WHICH IS NOT! secondly i thought in order to get the latest update i had resolve this memory error by WIPING OFF the mobile so i did a FULL DATA BACK UP while it was running OS 10.2.0.424 , and then DID the full WIPE, but it took around 6 HOURS!!!! after the wiping process i tried to download the new update 10.2.1537 and it was successful, i connected my q5 to my laptop and opened blackberry link (latest version) selected the BACK UP FILE which i made before the wipe , BUT IT WAS UNSUCCESSFULL ( the alert message was this : this dats file isn't compatible with the version of the device software that you are currently running, update your device software and try again) WHICH i did downgrade to the previous version OS 10.2.0.424 and tried to restore the data file, but it WOULDNT WORK! please HELP im in desperate need for your help ive got my whole life on this mobile and right now im isolated!
the following day what happened is, i did try what was mentioned in the link BlackBerry 10. Restoring Backup after a firmware downgrade. i did exactly the same but it FAILED, and i got this error (there could have been a problem with the device or connection during the restore. Verify that the device is turned on and connected) and then device restarts afterwards, hence, i started to get this error message after i updated to latest OS 10.2.1.539 but when i tried to restore the back up when i was running the previous OS 10.2.0.424 the error message was ( the back up isn't compatible etc... ) this is really confusing, my device is working just fine and its properly connected with no problems, ive been searching and looking for solutions all over the internet but no luck , im really exhausted ive been working on my q5 for almost 26 hours, im just praying to get this fixed.

Same Here..after upgrade won't restore, I did backup with blackberry link and it was a successfull backup..I brought it to the service centre and ask the to restore it for me with no success as well..they even downgrade my phone to 10.1...no success..please find the bug on your OS or BlackBerry LINK to fix this..my data is very important to me..BTW BlackBerry protect also doesn't do a proper backup..only my previous BlackBerry (OS 7) backup is available for restore..this is the second time I lose data to BlackBerry (before was in my Dakota)...

Restoring backed up data to another mac

i have backed up all my files from my macbook on time machine, but now i want to put that data on to a macbook pro. When i open time machine on the pro, there's no data there. please help

grutz wrote:
i have backed up all my files from my macbook on time machine, but now i want to put that data on to a macbook pro. When i open time machine on the pro, there's no data there.
you have two options.
1. run Migration assistant on the new computer. It's in /Applications/Utilities. It lets you migrate your user data and applications from a TM backup. this is the best and the easiest option.
2. use TM in a browse mode to selectively restore what you want by hand. to do that control-click on TM in the dock and select 'browse other TM backups". it will let you browse your old TM backups and restore what you want where you want to.
Either way when you are done you should set up TM on the new computer again in TM system preferences. it will start a new backup sequence and you'll be able to access it normally.

HT4859 restoring backed up data - after set up assistant

Similar Messages

Maybe you are looking for