HT4859 what does it mean if my new iphone says that iCloud backup are compatible with the version of iOS (6.0.2) on this iblePhone
I am trying to back up my fiels from old iPhone 3S to the new one I have just bought using iCloud and when I am doing it, my new iphone 5 is writing thet iCloud back-up are compatible with the version of iOS (6.0.2) on this iPhone. What does it mean?
I just worked on this same issue for someone else at work (iPhone 4 or 4S up to date). The iPhone 5 needs to be up to date to the newest version of IOS
Here is what I did:
1. Got into the iPhone 5 without using an account
2. After getting in, it shows that there is an update
3. Completed the update
4. After the phone rebooted, went in and completed a reset of the phone to factory
5. When it came back up followed prompts and was able to restore from iCloud backup.
Hope this helps
Similar Messages
-
I've got a new iPad and am trying to do an iCloud backup but keep getting the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad.
How do I restore info from iCloud onto my new device?You would have to update your device first, before you can restore your iPad from your backup. Resolution: set it up as anew device, then update your device to the latest version "Settings > General > Updates", then reset your device again "Settings > General > Reset > Erase All Content and Settings" and then after the iPad restarts again, choose to restore your device from your backup.
-
Trying to set up new 5s from icloud backup on 4s. when i select "restore from backup" the current backup on my 4s (today) is gray and cannot be selected. the msg on the bottom: "No icloud backups are compatible with the version of ios (7.0.6) on this phone. 4s ios is 7.1 with no updates available. help?
You will have to first update your new iPhone 5s to iOS 7.1 before you can use your iPhone 4s backup.
Set it up as new, do the update (Settings > General > Software Update) and then re-enter setup by erasing the phone (settings > General > Reset > Erase all Content and Settings). -
I recently lost my iPhone 5 and purchased a refurbished one on line, I'm trying to backup by iCloud to the new phone but when I get to the "Choose backup" screen I'm told "No iCloud backups are compatible with the version (7.1) on this iPhone". My previous iPhone had up to version 8.1.3. Now I'm stuck in the backup screen and can't get back to settings. How can I finish the backup and how do I get out of backup mode to possibly update to the version I need?
Hi AppleRobertion,
What you are going to need to do here is update your iPhone's version of the operating system to a version at least as new as the one on your backup - iOS 8.1.3. To do this, follow the directions in this article -
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Specifically -
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Once the update is complete you should be able to restore from your backup.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?
UUpdate the new iphone to iOS 8.3 before you try to restore the backup.
-
i got a new phone and im trying to restore it thru icloud backup restore but its telling me that its not compatiable but i cant get to the new version what do i do?
You'll have to update the phone in iTunes on your computer in order to access your backup.
Connect the new phone to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab, then click Check for Update and update your phone. (If you get a pop-up when you connect to iTunes to update, go ahead and update.) After updating the phone, set it up as a new iPhone, disconnect it from your computer, go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup. Sign into your iCloud account and your backup should now be available to restore from. -
Please help
I think that imobl hit the nail on the head.
The OP is trying to restore an iOS 6.1.2 backup on his new iPad that is only running 6.0. You can't restore from a newer iOS backup to an older iOS. The OP has to update the new iPad to iOS 6.1.2 and then it will work. -
Trying to choose iCloud backup on my new phone as I lost my previous one but it states"no iCloud backups are compatible with this version" therefore I can't set up my replacement phone! Any suggestions
You can't restore a backup that was made on a device running a more recent version of iOS. If your replacement phone is running iOS 6.0.1 and the one you backed up was running 6.1.2, for example, you would have to update your replacement phone before you could restore to the backup. If this is the case, update your phone by connecting it to your computer, and selecting Check for Update or Update on the Summary tab of your iTunes sync settings, update the phone and set it up as New. Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens again and choose Restore from iCloud Backup. You should then be able to restore your backup.
-
What does it mean when app on iPhone says waiting?
some of my apps do not open and it says waiting. What is wrong?
Actually what was wrong was all the apps that said waiting needed to be updated. Thanks for you suggestions Kuantan!
-
Hi. I wish to know whether the new NVidia Quadro K2200 and K4200 are compatible with the Mercury Playback Engine in Adobe Premiere Pro CS6. My old graphic card NVidia Quadro FX580 is not listed and not effective apparently because Mercury Playback Engine is effective as from 1Gb RAM. I use a HP workstation and AVCHD (AVCCAM) and DSLR full HD. Thanks.
Message was edited by: Brittany Mauriss
Deleted private user information (email address)It is compatible, but why anyone would want such a weak and slow card at a premium price is beyond me. See Tweakers Page - What video card to use? and GeForce GTX980 vs Quadro k4200 (2200) #2.
-
What does it mean when I get a message that says You do not have enough access privileges for this operation
To be honest I'd be very tempted to ring Applecare and explain that prior to downloading iOS5 your iPod Touch worked perfectly however since downloading Apple's new iOS5 it's "bricked" therefore can they as a matter of decency try to help put things right warranty situation notwithstanding. Afterall it does appear to be one of Apple's products that has broken your previously working iPod Touch.
-
When trying to do a system backup to my remote LaCie hard drive, what does it mean when I get a message that says "waiting for volume LaCie disk"? While this message apears no back-up occurs. Is there a setting I need to change?
You can't do a backup of icloud to an external drive. In fact, does your post have anything to do with icloud (you're in the icloud forum)?
What kind of "system backup" are you doing? Are you using Time Machine? -
what does it mean on itunes when it says a movie will not be available on the cloud after purchase?
It means that you get only one download of the movie per purchase, so once it's downloaded, you'd be wise to make a backup. Otherwise, if something happens to delete the movie, you'll have to buy it again.
Regards. -
I had to get a new Ipad so I need to restore from Icloud, but it tells me no Icloud backups is compatible with iso 6.0.1 so what do I do.
Restore from iCloud Backup
1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Enable Location Service
9. Select network, enter password and join network
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Selected Restore from iCloud Backup
12. You'll be required to enter Apple ID and Password
13. Agree to Terms and Conditions
14. Select Backup file
15. You'll see progress bar
16. Red slider will appear; slide to unlock; step #1 to #16 is fast
17. Pre-installed apps will be restored first
18. Message: Purchased apps and media will now be automatically downloaded
19. You'll see a pageful of apps with Waiting/Loading/Installing
20. When the restore process is complete, your device will restart. You should connect the device to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on). -
I have restored a new iPhone from an iCloud backup but selected the wrong backup point. Can I do the restore again from a different backup point?
Welcome to the Apple Community.
settings > general > reset > erase all content and settings, once complete the set up assistant will ask if you have an iCloud back up, follow on screen instruction to restore from it.
Maybe you are looking for
-
Lost "Reopen all windows from last session" and some of my search history
Safari seems to turn into a memory hog. When this happens it appears to stop recording browsing history and thus does not reload all the windows I had open. I always restart Safari when it starts hogging memory. Has anyone else been able to correlate
-
I have always been able to access Yahoo from my desktop icon. In the last few days, this has not worked 90% of the time (once in a while I can get through). I need to access it through my Verizon account. Why is this suddenly happening - for years I
-
Gui_download - last line
Hi, The function module gui_download always create a blank line at the end of file created. But I need a file without this last line. How can I do that ? Thanks !
-
BW settings required when we change the host name in R/3
Hi All, we had a test system in R/3 and we are planning to change the Host name in R/3 and this is connected to bw test.after basis change the host name in r/3 test what are settings required to be done in BI . Regards, jasmine.
-
How to get OLAP cube objects size info?
Hi, I am new at OLAP cube. I want to know OLAP Cube objects size information like VIEW. is any query to get size of Cube objects? Please help me out on this. Thank you, Nitin